Has the Touran Car Been Discontinued?

1 Answers
DeNathan
09/05/25 7:22am
Touran car has not been completely discontinued and is still in production and available for sale. Below is detailed information about the Touran car: 1. Touran Car's Engine: The Touran uses a 1.4-liter turbocharged engine with the model code EA211, which has consistently held a certain market share. This engine has a maximum power of 110 kW, a maximum torque of 250 Nm, a maximum power speed of 5,000 rpm, and a maximum torque speed ranging from 1,750 to 3,000 rpm. 2. Touran Car's Transmission: It employs a dual-clutch transmission, which offers fast gear shifting and high transmission efficiency. This type of transmission pairs well with small-displacement turbocharged engines. 3. Touran Car's Front and Rear Suspension: The new Touran features a MacPherson independent front suspension and a four-link independent rear suspension, enhancing wheel traction and the car's handling performance.
Was this review help?
20
0
Share
More Forum Discussions

What does the green laser light on the highway mean?

Highway green laser lights are anti-fatigue laser lights used to remind drivers to pay attention to safety during night driving. These laser beams have a long projection distance, with a range of up to 2 kilometers, and are generally installed on straight road sections. The green laser is particularly noticeable at night and comes in two forms: constant light and strobe light, which can effectively stimulate the driver's brain and serve an anti-fatigue function. Green laser lights can alleviate visual fatigue caused by monotonous driving environments through light variations, and they are installed only after multiple on-site surveys and concentrated demonstrations. The green laser lights form a beam network in the air in the direction of oncoming traffic without obstructing the driver's view. Together with flashing lights and high-decibel alarms, they create a trinity of visual, auditory, and photoelectric warning functions, enhancing driving safety awareness, with particularly noticeable effects during night driving and in adverse weather conditions such as rain, snow, and fog.
4
0
Share

How long does it take to drive 200 kilometers?

Driving 200 kilometers usually takes about two and a half hours. When driving on the highway, if there are many vehicles, it can be difficult to maintain higher speeds, and the speed typically stays between 80 to 100 kilometers per hour. Safety is the most important factor when driving on the highway, so always obey traffic rules and avoid speeding. Tire pressure affects the actual speed of the vehicle. Prolonged tire wear or extended high-speed driving can increase tire pressure, which in turn affects the actual speed of the wheels. For example, when you first start driving on the highway, your actual speed might be 100 kilometers per hour, but after an hour, it could increase to 102 kilometers per hour.
3
0
Share

What Are the Basic Knowledge for Beginners Driving on the Road?

Basic knowledge for beginners driving on the road includes: 1. Do not park randomly on main roads; 2. Slow down when turning or when visibility is poor; 3. Do not rush through traffic lights; 4. Choose the correct driving lane; 5. Use low gear and low speed when passing through undulating roads; 6. When slowing down, first apply the brake, and when the speed drops to an appropriate level, press the clutch to downshift; 7. Lock the car doors and windows after getting out of the car. When the speed is slightly slower, beginners should tilt the car body when turning and adjust the speed before turning. If an obstacle is suddenly detected, immediately stop tilting, straighten the car body, and then brake. Beginners should use the accelerator appropriately to control speed. When there is a safe distance, simply releasing the accelerator is sufficient to slow down, and appropriately using the foot brake makes it easier to control speed.
18
5
Share

What Are the Causes of Engine Shaking?

Engine shaking causes: 1. Faulty car ignition system; 2. Poor fuel quality affecting engine performance; 3. Severe engine carbon buildup leading to power loss; 4. Unstable oil pressure causing poor fuel supply; 5. Abnormal water temperature altering ignition timing and affecting engine lubrication. An engine (Engine) is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. The term engine can refer to either the power generation device or the entire machine including the power unit.
13
5
Share

Are Car Rearview Mirrors Convex Mirrors?

Car rearview mirrors are convex mirrors, featuring a spherical surface with varying radii of curvature. They produce smaller images than the naked eye sees but offer a wider field of view, similar to the "wide-angle lens" effect of a camera. They are commonly used as side mirrors and lower rearview mirrors. These mirrors reflect conditions behind, beside, and below the vehicle, enabling drivers to indirectly observe these areas, effectively acting as a "second pair of eyes" that expands the driver's field of vision. The mirror surface, shape, and operation of car rearview mirrors are meticulously designed, with quality and installation governed by specific industry standards that must not be disregarded. The use of convex mirrors in vehicles reduces blind spots for drivers, playing a crucial role in traffic safety.
13
5
Share

Is it better to keep the auto-hold function on or off?

It is better to keep the auto-hold function on for the following reasons: 1. When the vehicle is stopped, you don't need to keep your foot on the brake pedal—the indicator light turns on when the function is active and turns off when it's inactive. 2. It helps save fuel and reduce carbon buildup by automatically restarting the engine when needed. This function acts like an automatic handbrake, eliminating the need to keep pressing the brake pedal, shifting to neutral, or engaging the handbrake manually. To deactivate the auto-hold function, simply press the accelerator lightly. The function will also deactivate automatically when the seatbelt buckle is unlatched or the door is opened. If you need to exit the vehicle or unbuckle your seatbelt while the vehicle is braked, be sure to shift into P (Park) or engage the electronic parking brake.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.