Has the Subject 2 Driving Test Added New Items?

1 Answers
LaVivian
07/25/25 1:40am
As of now, the Subject 2 driving test has not added any new examination items. On April 1, 2022, the newly revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" and "Administrative Measures for Scoring of Road Traffic Safety Violations" will indeed be implemented, but there are no additions to the Subject 2 test items. Article 33 of the newly revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 162) stipulates the following content for the Subject 2 test: (1) For large buses, heavy-duty trailer trucks, city buses, medium-sized buses, and large trucks, the test includes: pile test, hill-start, parallel parking, driving through a single-plank bridge, curve driving, right-angle turn, driving through a limited-width gate, narrow road U-turn, as well as simulated highway driving, continuous sharp turns on mountainous roads, tunnel driving, driving in rain (fog) conditions, slippery road driving, and emergency handling; (2) For small cars and low-speed trucks, the test includes: reverse parking, hill-start, parallel parking, curve driving, and right-angle turn; (3) For small automatic transmission cars and small automatic transmission passenger cars for the disabled, the test includes: reverse parking, parallel parking, curve driving, and right-angle turn. From this, it can be seen that the Subject 2 test items remain the same as before, with no new additions. As for whether there will be additions in the future, it is currently unknown. Even if there are, they will be determined by the traffic management authorities. Generally, based on the national standard test items, local provincial public security traffic departments may add test items according to local conditions. For example, in Guizhou, due to frequent rain and numerous tunnels, the Subject 2 test has added two items: simulated tunnel driving and simulated rain (fog) slippery road driving.
Was this review help?
7
3
Share
More Forum Discussions

What are the effects of a broken car exhaust pipe?

Car exhaust pipe damage has an impact on the vehicle. Exhaust pipe damage can be divided into three situations: front section damage, middle section damage, and rear section damage (i.e., damage to the catalytic converter part). If the muffler part of the exhaust pipe is damaged, the biggest impact is that the noise will increase, but it does not significantly affect other performance aspects of the car. If the rear section of the exhaust pipe is damaged, not only will the noise be loud, but the exhaust emissions will also fail to meet standards, necessitating replacement. Relevant information about car exhaust pipes is as follows: 1. Introduction: The car exhaust bellows, also known as the car exhaust pipe hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler. It provides a flexible connection for the entire exhaust system, thereby reducing vibration and noise, facilitating installation, and extending the life of the exhaust muffler system. 2. Use: It is mainly used in light vehicles, micro vehicles, and buses. Its structure consists of a double-layer bellows covered with a steel wire mesh sleeve and a clamping ring sleeve at both ends. To achieve better noise reduction, the bellows can be equipped with a telescopic section or mesh sleeve inside.
13
2
Share

What charger should be used to charge a car battery?

A charger that matches the voltage and capacity of the battery. Here is the relevant content introduction: 1. Charging method: Connect the positive terminal of the charger to the positive terminal of the battery, and the negative terminal of the charger to the negative terminal of the battery, then press the charging button to start charging. However, there is no need to wait until the battery is fully charged before unplugging it. As long as there is enough power to start the car engine, it is sufficient. Once the engine starts, it will drive the alternator via the belt, and the generated electricity will be rectified and regulated before directly charging the car battery. Just driving normally for one to two hours can restore the battery to its normal power level. 2. Precautions: After long-term use or multiple excessive charge and discharge cycles, the lifespan of the car battery will decrease, affecting the car's performance. At this point, a car battery tester should be used to measure the specific lifespan percentage to determine whether the battery needs replacement. The normal service life varies from 1 to 8 years, largely depending on the condition of the vehicle. If the vehicle's alternator charges normally and there are no electrical leaks or grounding issues, the battery can generally last for more than 3 years.
13
5
Share

Why does the Baojun 530 electronic steering lock fail to engage?

The reasons for the electronic steering lock failing to engage are: the oil cup interior is too dirty, the filter screen is clogged, or the oil level in the cup is low. There is a large amount of air in the power steering system. Foreign objects inside the steering system cause the steering pump flow control valve to stick. Insufficient tire pressure, interference with the pump's steering column, loose connections, or pump issues. Problems caused by steering lock failure: Electronic steering lock failure in the Baojun 510 can cause the car to drift while driving, meaning the steering wheel remains stationary while the car automatically veers to one side. This may be due to inaccurate front and rear wheel alignment or inconsistent alignment parameters, or bent or deformed left and right steering tie rods, or excessive clearance at the hinge. Steering lock: The steering lock is used to lock the car's steering shaft. The steering lock is integrated with the ignition lock and installed under the steering wheel. It is controlled by the key. After the ignition lock cuts off the ignition circuit to stop the engine, turning the ignition key to the extreme left position will extend the lock tongue into the steering shaft groove, mechanically locking the car's steering shaft.
1
1
Share

What Items Are Included in Brake Maintenance?

Brake maintenance includes high-temperature protection for brake pads, lubrication maintenance of brake calipers, cleaning of brake discs, and replacement of brake fluid. The vehicle's braking system is responsible for slowing down and stopping the car, operating on the principle of converting the vehicle's kinetic energy into thermal energy through friction. The braking system consists of components such as the brake pedal, booster, master cylinder, ABS assist, hydraulic lines, wheel brake calipers, and friction components. In addition to regular inspections and timely replacement of worn friction components, the braking system should also undergo proper periodic maintenance. Use solvent-based cleaners to clean the surfaces of brake friction components and their cooling channels, ensuring not to use cleaners containing lubricating ingredients to avoid damaging rubber components.
11
1
Share

Is the Chery QQ 0.8 or 1.1 more fuel-efficient?

The Chery QQ 0.8 is more fuel-efficient. This is because a car's displacement is directly proportional to its fuel consumption—the larger the displacement, the higher the fuel consumption. Chery QQ 0.8: The 0.8 QQ's engine utilizes the SQR372, a three-cylinder, 12-valve, double overhead camshaft (DOHC) multi-point electronic fuel injection gasoline engine. This engine was independently designed by Chery based on technology introduced from the renowned Austrian engine design company AUL and produced at Chery's heavily invested Engine Plant No. 2. Thanks to the DOHC and multi-valve technology, this engine can operate stably at high speeds, significantly improving combustion conditions, achieving a power output of 38KW, with a specific power exceeding 47KW per liter. Chery QQ 1.1: The 1.1 QQ was initially equipped with the DA465Q, an inline four-cylinder, single overhead camshaft (SOHC) multi-point electronic fuel injection gasoline engine, which Chery had to purchase due to the lack of its own engine during the early stages of the QQ model's development. This engine is commonly used in microvans.
14
2
Share

What Causes a Sudden Dimming of the Car Display Screen?

It may be caused by unstable power voltage in the car. Here are the detailed explanations: 1. Function: The car display screen is located on the car's center console and mainly displays car audio, navigation, vehicle information, reverse camera images, etc. It includes single-touch LCD screens and multi-touch LCD screens. 2. Check the navigation cable: If the voltage is stable, then check the cables on the back of the device for any issues. You can replace the connections to troubleshoot. If there are no contact issues, inspect the display cable of the device. If there is a problem, replace it with a new one for testing. If there is only no image but sound remains, it indicates that the power plug of the navigation display is loose. If there is no sound or image at all, the DVD may be damaged. 3. Usage notes: Ensure that cables are plugged or unplugged when the power is off. To maintain electrical stability and safety, the interval between turning the device on and off should not be less than 6 seconds. During use or storage, be careful with the surface polarizer of the LCD screen to avoid scratches from hard objects.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.