Has the oil dilution issue in the Avancier been resolved?

1 Answers
AdamRose
07/30/25 5:14am
The oil dilution issue in the Avancier has been resolved, and so far, there have been no reports of oil dilution problems. Here is an introduction to the Avancier: 1. The front face of the Honda Avancier adopts a family-style design, with thick winged chrome trim running through the grille, and sharp headlights and fog lights that incorporate LED elements. The body lines are bold and well-defined, featuring a fastback design that gives the vehicle a coupe-like feel. 2. In terms of body dimensions, the Avancier measures 4816*1942*1669mm, with a wheelbase of 2820mm, which gives it a clear advantage over competitors like the Highlander and Tiguan L. 3. The Avancier's 1.5T engine delivers 193 horsepower, and the matched CVT transmission is smooth and fuel-efficient. Additionally, the Avancier's noise insulation and comfort have significantly improved compared to previous Honda models, becoming outstanding, especially in terms of chassis comfort, ranking among the top in its class.
Was this review help?
7
3
Share
More Forum Discussions

How to Conduct Annual Inspection for Pure Electric Vehicles?

Obtain the annual inspection form from the driving association and get it stamped. Take the annual inspection form to the local traffic police brigade in the vehicle's jurisdiction for stamping. Bring the annual inspection form to the entrance of the vehicle inspection line, sign in, enter the inspection line, and pay 100 first. With the annual inspection form, inspection result form, and vehicle license, collect the vehicle inspection certificate and have the validity period printed on the vehicle license.
3
5
Share

How to Legally Drive a Homemade Car on the Road?

As long as the vehicle is self-assembled or pieced together, regardless of whether legal materials from legitimate manufacturers are used or not, it cannot be legally driven on the road. Car modifications are based on the owner's usage needs and involve internal alterations.
11
4
Share

Can vehicle electrical appliances be used when the ignition switch is in the ON position?

The ignition switch in the ON position means that all basic equipment except the starter is functioning normally. If the key is also in the ON position, all components of the vehicle are powered, including the engine system. The dashboard lights will illuminate, and the fuel pump will start building oil pressure. After approximately 5 to 10 seconds, when the fuel pump has fully established oil pressure and the dashboard needle returns to its original position, pressing the start switch will start the vehicle. Meanings of other positions of the ignition switch: LOCK is for locking the car. Generally, placing the key in this position locks the steering wheel, preventing significant movement. ACC powers the entire vehicle, allowing the radio, lights, etc., to function normally, but the air conditioning cannot be used. Control process of the vehicle's ignition switch: When the ignition switch is in the "OFF" position, turning the key to the "OFF" (shut) position connects the two internal contact points in the horizontal position, thereby connecting the external wires "black-white wire" and "green wire." If measured with an ohmmeter (Ω), these two wires should show continuity. In an actual vehicle, the connection of these two wires indicates that the entire circuit system stops working, the ignition system circuit is in a short-circuit state, and the engine shuts off.
5
5
Share

How to Install a Door Buffer Pad?

Use a damp cloth and dish soap to clean off any hard residues remaining on the car door. Place the door protective pad on the cleaned car door. Remove the backing paper from the adhesive hook and attach it to the designated position where the hook should be placed. Following the installation position of the door pad, adhere the door pad onto the adhesive hook.
9
0
Share

How to Replace the Car Key Shell?

A flathead screwdriver is used to pry open the key shell; a pair of pliers is used to remove the key blade; a hammer is used to disassemble the key blade. First, remove the battery cover, take out the button battery to expose the chip, and use the flathead screwdriver to pry open the shell. Place the key on the pliers, then position the rod against the pin, and use the hammer to knock the pin out to separate the key blade. Finally, replace the key shell.
6
5
Share

What causes the high temperature in the Mingyu 930 Weichai 4102 engine?

Mingyu 930 Weichai 4102 engine water temperature is too high for the following reasons: Insufficient coolant: It may be due to insufficient engine coolant, faulty water temperature sensor or water temperature gauge, etc. Driving at low speed with heavy load for a long time in high temperature seasons can also cause high temperature. Overheating: When encountering an overheating alarm, you should first slow down and then pull over to the roadside. Do not rush to turn off the engine, as overheating can cause the piston, cylinder walls, cylinder, crankshaft, etc. to become too hot, thinning the engine oil and losing lubrication. Cylinder seizure: If the engine is turned off at this time, the parts are in an expanded state, and the gaps between the components are very small. Shutting down can cause some soft metals to fall off, and some may even cause cylinder seizure. Therefore, after discovering overheating, do not turn off the engine immediately. Instead, keep it idling temporarily to cool it down as much as possible. Engine blockage: When cooling, avoid splashing cold water on the engine to prevent sudden cold cracking and engine blockage. The correct method is: put on gloves, then place a folded wet cloth on the radiator cap, and gently unscrew the radiator cap a small crack. If water vapor slowly escapes and the radiator pressure drops, add cold water or antifreeze.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.