Has the Lavida Hatchback Been Discontinued?

What transmission does the Volvo S90 use?

Volvo S90 comes standard with an 8-speed automatic transmission, which can quickly respond to changes in engine speed, ensuring smooth gear shifts. The multiple switchable gear ratios mean the engine's torque and power range can be effectively utilized. Two of these gears are overdrive gears, which help save fuel when driving at a constant engine speed. Manual gear selection is also available, and the current gear is displayed on the driver's screen. Additional information: 1. The transmission is one of the main components of a car's drivetrain. The actual usage conditions of a car are very complex, such as starting, idling, low or high-speed driving, acceleration, deceleration, climbing, and reversing. This requires the car's driving force and speed to vary over a considerable range, while the output torque and speed range of the widely used piston engines are relatively small. 2. To adapt to frequently changing driving conditions and allow the engine to operate under favorable conditions (higher power, lower fuel consumption), a transmission is installed in the drivetrain. Each gear has a different gear ratio, equivalent to the meshing of a small gear with a large gear to produce different speeds. Lower gear ratios (3rd gear and below) are used for low-speed driving, where the output shaft speed is lower than the engine speed, providing greater driving force. Higher gear ratios (4th gear and above) are used for high-speed driving, where the output shaft speed exceeds the engine speed, reducing traction to achieve higher speeds. Shifting gears means selecting different-sized gears to mesh with the output shaft gear.

20

3

Share

What is the wiper size for Trumpchi GM6?

The wiper size for Trumpchi GM6 is 22+17 inches. Below is more information about the wipers: 1. To remove the wipers, first reset them, turn off the engine, then lift the wiper by hand and push it in the opposite direction to detach it. 2. If the wipers are blocked by the hood after resetting and cannot be removed: first power on the car, activate the wipers, and when they reach the middle of the windshield, power off. Then, exit the car and remove the wipers by detaching the entire wiper blade. Use one hand to pry open the rubber blade sideways while pressing down firmly on the main bracket with the other hand to separate the wiper blade from the arm. After this, the entire wiper blade can be removed.

17

4

Share

How to Activate the Auto-Lock Feature on the 10th Generation Accord?

The method to activate the auto-lock feature on the 10th Generation Accord is: With the car door open, press and hold the lock button on the remote key for 10 seconds until the turn signal lights on the dashboard illuminate. Below is more information about the 10th Generation Accord: 1. The 10th Generation Accord is a model under Honda, with dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. 2. In terms of power, the 10th Generation Accord uses three types of engines: a 2.0-liter naturally aspirated engine, a low-power version 1.5-liter turbocharged engine, and a high-power version 1.5-liter turbocharged engine. Additional Information: The auto-lock feature, also known as speed-sensing auto-lock, is an electronic device that automatically presses the lock button on the door when the vehicle reaches a preset speed, preventing accidental opening of the door.

6

3

Share

How to Use the A4L Automatic Parking?

To activate the A4L's automatic parking function, find a suitable parking space and then start the automatic parking system. Here are the detailed steps: 1. Conditions for activating the automatic parking function: The automatic parking can only be activated for parallel parking and requires the parking space to be at least 1.5 meters longer than the car. First, position the car parallel to or slightly behind the car in front. 2. Press the automatic parking button, and the indicator light will turn on: The dashboard display will show 'Drive Forward.' Shift to D gear, lightly press the brake to control the speed, and drive until the car is parallel to or slightly ahead of the car in front, until the dashboard display shows 'R.' 3. When reversing, shift to reverse gear, and the display will indicate 'Steering Intervention Started': Release both hands from the steering wheel, lightly press the brake to control the speed, and let the car automatically reverse into the parking space. After parking, the car will adjust its position. The automatic parking function is very practical for reverse parking.

8

1

Share

How to Drive an Automatic Transmission Car During the Break-in Period?

Driving methods for automatic transmission cars during the break-in period: 1. The break-in mileage is generally 500 kilometers, with the speed maintained between 60 to 70 km/h, and the engine speed should not exceed 2200 rpm; 2. From 500 to 1000 kilometers is the mid-term of the break-in period, where the speed can be increased from 60-70 km/h to 90-100 km/h, with the engine speed kept below 2500 rpm; 3. From 1000 to 1500 kilometers is the mid-to-late stage of the break-in period, where the speed can be increased to below 120 km/h, but the engine speed should not exceed 3000 rpm; 4. During the break-in period, each time you insert the key, turn it to the second position and wait for 10 seconds before starting the engine. This allows sufficient time for the internal oil pressure and fuel injection volume to adjust, ensuring optimal engine coordination; 5. Avoid placing too many heavy items in the trunk of the new car to reduce the load—the lighter the car, the better.

4

3

Share

Can the Lavida be started with one key?

The Lavida can be started with one key. To use it, simply press the start button twice in succession. Below are the detailed instructions for the Lavida's one-key start feature: 1. Steps and correct usage for the Lavida's one-key start: (1) Turn the ignition on or off: Briefly press the start button without depressing the brake or clutch pedal. (2) Normal start: First press the start button once, and after the ACC light comes on, press the start button again. The one-key start button will turn green, and the vehicle will perform a self-check. After the self-check is complete, depress the brake and press the one-key start button once more to start the vehicle. (3) Emergency start: If no valid remote key is detected inside the car, press the start button while bringing the remote key head close to the start button position to start the engine in emergency mode. (4) Engine restart function: If no valid remote key is detected inside the car after turning off the engine, the engine can be restarted within approximately 5 seconds. 2. Precautions for the Lavida's one-key start: (1) Always carry all remote keys with you when leaving the car. (2) If you only need to turn on the ignition, do not depress the brake or clutch pedal, as the engine may start unexpectedly.

14

0

Share

Has the Lavida Hatchback Been Discontinued?

What transmission does the Volvo S90 use?

What is the wiper size for Trumpchi GM6?

How to Activate the Auto-Lock Feature on the 10th Generation Accord?

How to Use the A4L Automatic Parking?

How to Drive an Automatic Transmission Car During the Break-in Period?

Can the Lavida be started with one key?

How Many Chances Are There for Each Driving Test Subject?

What does 'Do not tow a full-time four-wheel drive vehicle' mean?

What is the bulb model for the ninth-generation Civic?

How to use the snow mode of Dongfeng Fengguang S560?