Has the Haval Big Dog Been Discontinued?

1 Answers
Moreira
07/29/25 7:27pm
Haval Big Dog has not been discontinued and is currently in the pre-sale phase. The Haval Big Dog comes in four versions: Malinois, Border Collie, Labrador, and Husky. Positioned as a crossover between urban SUVs and off-road vehicles, it is not a hardcore off-road SUV but rather uses a unibody structure. Haval officially defines it as a "new species." Below is an introduction to the Haval Big Dog: 1. Exterior: (1) The body side features mostly bold, straight lines, giving a robust and sturdy impression. The front doors are equipped with keyless entry, and roof rails and side steps are also included. (2) The exterior mirrors feature lane-change assist warning lights, and the entire housing is designed in black. (3) The rear design is also notable, with protruding rear bumpers similar to the front and L-shaped smoked taillights that give a wild appearance. 2. Features: (1) The 2.0T model will be equipped with the fifth-generation Haldex all-wheel-drive system and a rear differential lock with dog teeth engagement. (2) The 2.0T engine delivers a maximum power of 204 horsepower and a peak torque of 320 N·m, paired with a 7-speed dual-clutch transmission.
Was this review help?
3
2
Share
More Forum Discussions

What is the shelf life of fully synthetic engine oil?

The shelf life of fully synthetic engine oil is approximately 5 years. The functions of engine oil are: 1. To alleviate friction and high temperature; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and components; 4. To buffer the pressure rise at the engine cylinder port; 5. To flush away dirt generated on the working surfaces of components. The steps for changing engine oil are: 1. Lift the vehicle, remove the underbody shield, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the oil drain plug after draining and wipe it with a tissue to check for leaks; 3. Reinstall the underbody shield and lower the vehicle, then use a funnel to add engine oil through the filler port.
8
5
Share

What Are the Symptoms of a Faulty Oil Pump?

Symptoms of a faulty oil pump include: 1. Weak acceleration, with jerking when accelerating suddenly; 2. Difficulty starting the engine, requiring prolonged key turning; 3. A humming noise while driving; 4. Illumination of the engine warning light; 5. Engine vibration. Engine oil plays a crucial role in lubrication, cleaning, sealing, cushioning, rust prevention, and heat dissipation within the engine. The functions of the oil pump are: 1. To circulate oil to various friction points in the engine, ensuring proper lubrication; 2. The oil pump consists of a gear pump and gear pump body, where the camshaft drives the rotation of the pump's driving gear when the engine is running; 3. The gears sling the oil along the pump's inner wall from the inlet to the outlet, creating low pressure and suction, drawing oil from the oil tank into the inlet; 4. As oil accumulates at the outlet, pressure increases, forcing oil to the friction points for mandatory lubrication.
16
5
Share

Is the Lavida Tiptronic an AT transmission?

Lavida Tiptronic is an AT transmission. Below is relevant information about transmissions: Main functions: Changing the transmission ratio to expand the range of torque and speed variations at the driving wheels, adapting to frequently changing driving conditions while keeping the engine operating under favorable conditions. When the engine's rotation direction remains unchanged, it allows the vehicle to only move in reverse; utilizing neutral gear to interrupt power transmission, enabling engine startup, gear shifting, and facilitating transmission gear changes or power output. Working principle: Manual transmissions mainly consist of gears and shafts, achieving speed and torque variations through different gear combinations; whereas automatic transmissions (AT) are composed of torque converters, planetary gears, and hydraulic control systems, achieving speed and torque variations through hydraulic power transmission and gear combinations.
16
3
Share

Should You Depress the Clutch When Braking in a Manual Transmission Car?

Whether to depress the clutch when braking in a manual transmission car depends on the situation: 1. Depress both when the speed decreases or during short-distance braking; 2. Do not depress the clutch when braking at higher speeds or over long distances. The functions of the clutch include: 1. Gradually increasing the driving force of the car for a smooth start; 2. Temporarily separating the engine and transmission for gear shifting; 3. Preventing overload in the transmission system; 4. Reducing torsional vibration impacts from the engine and extending the lifespan of transmission gears. Braking serves to reduce speed, and its usage precautions include: 1. Apply brakes gently when following another vehicle; 2. Use emergency braking cautiously in rainy conditions; 3. Avoid emergency braking on slopes and curves.
18
4
Share

What is the method to reset the maintenance light on Citroen C4L?

The method to reset the maintenance light on Citroen C4L is: 1. Turn the ignition switch to the off position; 2. Press and hold the trip reset button on the dashboard; 3. Turn the ignition switch to the on position; 4. The odometer display will start counting down, and when it shows 0000.0, release the button. Taking the 2019 manual comfort version of Citroen C4L as an example, its body structure is a 4-door 5-seater sedan, with body dimensions of 4675mm in length, 1780mm in width, and 1500mm in height, a wheelbase of 2710mm, a fuel tank capacity of 60 liters, and a trunk capacity of 435 liters.
9
4
Share

Can I drive when the water temperature gauge shows 0°C at startup?

You can drive, but it is recommended to warm up the engine for a few minutes, as this is not the ideal temperature for optimal fuel efficiency. Reasons for using a water temperature gauge: An automobile engine requires a certain operating temperature for normal functioning. Temperatures that are too high or too low are not conducive to the engine's normal operation and performance. On the other hand, the heat generated by the engine cannot be sufficiently dissipated by conventional air cooling alone, which is why water cooling systems are widely used in automotive engines. The cooling system's role is to maintain the engine within the most favorable temperature range to enhance engine power, reduce wear, and minimize fuel consumption. Both excessively high and low temperatures can adversely affect engine performance. Normal water temperature gauge readings: The water temperature gauge typically ranges from 0 to 130°C, with the normal operating temperature centered at 90°C. After starting the vehicle, the water temperature rises quickly. Once the needle reaches the center position, the temperature stabilizes. Generally, it is best to start driving when the temperature reaches the middle position.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.