Has the Geely Emgrand GS been discontinued?

What Causes a Car's Turn Signal to Flash Faster Than Normal?

There are several reasons why a car's turn signal may flash faster than normal: 1. A burnt-out turn signal bulb; 2. Poor contact in the turn signal circuit; 3. Inconsistent bulb power or model; 4. Faulty bulb control relay. How to use turn signals: 1. Push the turn signal lever to the left to activate the right turn signal; 2. Push the turn signal lever to the right to activate the left turn signal; 3. Lift the turn signal lever upwards to make the hazard lights flash. Functions of turn signals: 1. To indicate the intended turning direction to pedestrians or other vehicles; 2. To show overtaking or lane changing direction; 3. When both left and right turn signals flash simultaneously, it indicates an emergency situation to alert other vehicles.

9

0

Share

Where is the child lock on the Tayron?

The child lock on the Tayron is located on the two rear doors. The function of the child lock is: when there are children in the rear seats, it can prevent children from opening the door during driving, thereby avoiding danger and ensuring the safety of children's lives. Taking the 2020 Tayron as an example, it is a mid-size SUV with body dimensions of: length 4589mm, width 1860mm, height 1660mm, and a wheelbase of 2731mm. The 2020 Tayron has a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension. It is equipped with a 1.4T turbocharged engine with a maximum horsepower of 150PS, a maximum torque of 250Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.

18

5

Share

What brand is Antares tires?

Antares is the tire brand of Antaeus. The company was established in 2008. Antaeus Tire Company is a Sino-Hong Kong joint venture tire trading company founded in 2008, headquartered in Hong Kong, engaged in the distribution and sales of well-known domestic and international tire brands. In 2011, it officially launched its own tire brand - Antaeus Tires, which are manufactured by renowned domestic tire manufacturers and marketed as the company's flagship brand overseas. Antaeus Tires have been registered with the Trademark Office of the State Administration for Industry and Commerce in China and internationally under the Madrid Agreement in its member countries. As a Sino-Hong Kong joint venture primarily focused on tire trading, the company commissions production from renowned domestic tire manufacturers. The tire specifications produced exceed 300 types, including passenger car tires, SUV tires, light truck tires, and snow tires, making it one of the most comprehensive brands in terms of coverage for domestic passenger vehicle specifications. Tire maintenance methods: Enhance awareness of tire safety and conduct regular inspections. Regularly correct wheel balance; unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Perform regular tire rotation. To ensure even wear across all tires on the same vehicle, rotate the tires every 5,000 kilometers. In daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallow. If the tread is worn flat, it loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks can be potential hazards for blowouts at high speeds. Additionally, immediately remove pebbles from the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent use of brakes and sudden stops to prevent accelerated tread wear from dragging against the ground.

11

5

Share

What is the speed limit for cars driving in urban areas?

Car speed limits in urban areas vary depending on different situations: 1. Motor vehicles driving on roads must not exceed the speed indicated by traffic signs or markings; 2. On roads with two or more motor vehicle lanes in the same direction where there are no speed limit signs or markings, the maximum speed for urban roads is 70 km/h, while the maximum speed for closed motor vehicle-only roads and highways is 80 km/h. Driving precautions include: developing the habit of fastening seat belts upon entering the vehicle, ensuring doors are properly closed, slowing down at intersections between main and auxiliary roads, strictly adhering to traffic regulations, maintaining proper control of the steering wheel while driving, avoiding fatigue driving, never driving under the influence of alcohol, and exercising caution when driving at night.

17

3

Share

What are the correct steps for starting a car?

The correct steps for starting a car vary depending on the type of vehicle: For automatic transmission cars, the steps are: 1. Turn the ignition key to the power position; 2. Press the foot brake and shift the gear from P to N; 3. Release the foot brake and start the engine; 4. Warm up the car while stationary; 5. Press the foot brake, shift the gear from N to D, and release the handbrake; 6. Gradually release the foot brake and smoothly press the accelerator to start moving. For manual transmission cars, the steps are: 1. Fully depress the clutch pedal; 2. Move the gear lever to engage the 1st gear; 3. Gently push the turn signal lever downward to activate the left turn signal, indicating to vehicles in front and behind; 4. Press the horn button to alert pedestrians in front of the vehicle that you are about to start; 5. Release the vehicle's handbrake; 6. Lift the left foot until the clutch is in a semi-engaged state, and the vehicle begins to vibrate slightly; 7. As the vehicle starts to move, release the clutch and gently press the accelerator.

1

5

Share

What are the functions of the car's internal circulation?

The function of the car's internal circulation is to close the airflow channel between the inside and outside of the vehicle, forming an internal airflow circulation. It can effectively and promptly prevent external dust and harmful gases from entering the car and maintain the internal temperature. The method to use internal circulation is: press the corresponding button to switch the air conditioning mode to internal circulation. The differences between internal circulation and external circulation are: 1. Different air circulation methods: internal circulation draws air from inside the car; external circulation draws air from outside the car, and after the air conditioning system cools or heats the air, it blows out from the air conditioning vents. 2. Different functions: internal circulation effectively prevents external dust and harmful gases from entering the car and can improve the cooling and heating effects of the air conditioning; external circulation draws fresh air from outside into the car to maintain the air quality inside the vehicle.

14

5

Share

Has the Geely Emgrand GS been discontinued?

What Causes a Car's Turn Signal to Flash Faster Than Normal?

Where is the child lock on the Tayron?

What brand is Antares tires?

What is the speed limit for cars driving in urban areas?

What are the correct steps for starting a car?

What are the functions of the car's internal circulation?

What are the reasons for the one-button start key not responding?

What is the reason for a clunking sound when stepping on the brake?

How Long Do New Brake Pads Need to Break In?

How to Eliminate the Tire Pressure Warning Light?