Has the DS6 been domestically produced?

1 Answers
BeauAnn
07/29/25 12:19pm
Now the DS6 has been acquired by China and can be considered a domestically produced vehicle. Body dimensions: DS is a car produced by a French company and is a brand under Citroën. The DS6 is equipped with a 1.6-liter turbocharged engine across all models. The car has a wheelbase of 2732 mm, with length, width, and height measurements of 4553 mm, 1858 mm, and 1610 mm, respectively. Power specifications: The 1.6-liter turbocharged engine in the DS6 delivers a maximum power of 123 kW and a maximum torque of 240 Nm. This engine starts delivering maximum torque at 1400 rpm and maintains it up to 4000 rpm. The engine's maximum power is achieved at 6000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The engine is paired with a 6-speed automatic transmission.
Was this review help?
4
0
Share
More Forum Discussions

Is it okay to drive at 120 km/h during the break-in period of a new Audi?

The break-in period is best around 00 days. Here are some precautions for breaking in a new car: Warm up before starting: Before starting the car, turn the key to the second position and wait 5-10 seconds before ignition. This is because the fuel pump starts working when the key is turned, adjusting oil pressure and fuel injection. Waiting a few seconds before starting benefits both the motor and engine. Avoid long-distance driving: Driving long distances in a new car increases continuous engine operation time, which can accelerate wear on mechanical parts. Initial maintenance: During the break-in period, frequently check engine oil, coolant, and battery electrolyte levels, and top them up immediately if low. After reaching a certain mileage, promptly visit a service center for vehicle inspection and maintenance, including oil and filter changes, and a comprehensive check of the chassis system. Generally, an oil change is needed after driving about 1,500 kilometers.
3
5
Share

Is it normal for BMW X1 headlights to fog up?

Fogging is a normal phenomenon. Here are the relevant explanations: Reasons: BMW headlights adopt a non-sealed design for heat dissipation. There is an air intake hole and an exhaust hole on the headlight, which are used to balance the air temperature inside the headlight. The exhaust hole discharges hot air, while the air intake hole draws in cold air from outside. When the outside air is humid (such as during rainy or snowy weather), the air drawn in will contain relatively high moisture. After the headlights are turned off, the temperature inside the headlight decreases, and the drawn-in air condenses into fog. Brightness inspection: After driving 50,000 kilometers or more than two years, it is necessary to promptly inspect the brightness of the headlights. After a period of use, due to oxidation, power loss, and other reasons, the brightness of the headlights will be lower than the original level and will continue to decrease with prolonged use.
19
2
Share

What is the appropriate pressure for car air conditioning refrigerant charging?

Car air conditioning refrigerant charging pressure: High pressure 1.3-1.7MPA; Low pressure 0.1-0.25MPA. The following are some introductions about air conditioning refrigerant charging pressure: 1. If the pressure is higher or lower than the above range, it indicates abnormal expansion valve adjustment. Compressor problems are not included in this category. 2. When measuring the pressure of the air conditioning system, the engine should be idling, and the measurement should be taken at an ambient temperature of 35℃. 3. When the engine throttle is increased, the measured low pressure should decrease with the engine speed. The faster the speed, the more the pressure drops, which indicates good compressor performance. Otherwise, it indicates a compressor failure.
7
5
Share

Can the Kawasaki H2R be ridden on public roads?

The Kawasaki H2R cannot be ridden on public roads. As a professional track-level motorcycle, the Kawasaki H2R lacks rearview mirrors, headlights, and a license plate holder. Such designs do not comply with Chinese legal requirements, making it ineligible for registration. Below are the conditions for motorcycles to be legally ridden on public roads: Possession of a vehicle license and driver's license: The motorcycle must have a vehicle license. Motorcycles are classified as motor vehicles, and the vehicle license serves as valid proof that the vehicle can legally operate on public roads. Therefore, a vehicle license is an essential requirement for legal road use. Additionally, to legally operate a motor vehicle, the driver must possess a driver's license that matches the motorcycle's vehicle type. Only with this can the driver legally ride the motorcycle on public roads. Wearing protective gear: The driver must wear protective equipment, meaning the driver must wear a helmet while riding the motorcycle. There are also restrictions on road usage, as some areas do not permit motorcycles on public roads.
15
0
Share

What is the normal tire pressure range for sedans?

The normal tire pressure range for sedans is approximately 2.2 to 2.5 bar, but the specific standard should be determined based on the manufacturer's recommended value. Generally, the manufacturer's recommended value (cold tire pressure) can be found in the vehicle's user manual or on the label near the door (attached to the B-pillar or C-pillar). To ensure that the tires are in good working condition, it is essential to maintain the correct and appropriate tire pressure. However, it is difficult to control the tire pressure with 100% accuracy; it can be slightly higher but must never be too low. Compared to winter, tire pressure should be slightly lower in summer because high temperatures can cause the tires to heat up, and excessive pressure may lead to a blowout. In winter, tire pressure should be slightly higher than in summer due to thermal contraction and expansion. Regardless of adjustments, the tire pressure should not exceed the manufacturer's recommended value by a significant margin.
12
4
Share

What is the average fuel consumption of the Honda CRV?

The fuel consumption of the Honda CRV ranges between 6.4 to 7.3L/100KM, with slight variations depending on the configuration. The two-wheel drive configuration consumes between 6.4 to 6.8L/100KM, while the four-wheel drive configuration consumes between 6.7 to 7.3L/100KM. The reasons for increased fuel consumption are as follows: 1. Failure to match or unsuccessful matching with the engine control unit after cleaning the throttle body. 2. Faults in the engine's electronic control system, leading to an overly rich air-fuel mixture. 3. Damage to the ignition coil or spark plugs, or fuel injector leakage. 4. Cooling system malfunctions, causing the engine temperature to remain too low and stay in warm-up mode. 5. Excessive carbon buildup, resulting in incomplete combustion. 6. Faults in the fuel tank ventilation system, leading to fuel vapor leakage.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.