Has the Baojun 510 Been Discontinued?

1 Answers
GiannaRose
07/29/25 9:14pm
Baojun 510 has been discontinued. The relevant information about Baojun 510 is as follows: 1. Exterior Features: In terms of styling design, the Baojun 510 adopted a very distinctive split headlight design, with LED daytime running lights connected to the large front grille, while the main headlights were positioned on either side of the grille. The rear featured conventional halogen tail lights. The 2019 Baojun 510 introduced a new front and rear design, including a high-gloss matrix grille paired with LED split headlights. The new model also featured a fresh wheel design, and the rear lights adopted a sharp, swirling shape with LED illumination. 2. Interior Design: Inside, the Baojun 510 CVT model offered a choice of Rhythm Red/Black or Modern Black/Brown color schemes, enhancing the sporty ambiance to complement its sharp exterior. The cockpit featured LED-backlit adjustable split combination gauges and dual-stitched sport seats, creating a youthful and dynamic driving experience. Additionally, the center console area used high-quality piano black panels for superior tactile and visual appeal, with novel piano-key buttons and toggle switches that added a playful and engaging feel compared to conventional flat buttons and knobs. 3. Configuration: The Baojun 510 came equipped with an 8-inch LCD capacitive touchscreen, along with practical features like keyless entry + one-button start, automatic climate control, leather-wrapped steering wheel, cruise control, and power-adjustable/folding/heated exterior mirrors. It was the first in its class to feature a semi-open panoramic sunroof, enhancing the sense of openness for occupants. Furthermore, the CVT version of the Baojun 510 improved NVH (Noise, Vibration, and Harshness) performance, with 34 high-performance acoustic damping materials throughout the cabin, reducing idle noise to just 37 dB for a quieter ride.
Was this review help?
1
0
Share
More Forum Discussions

How to Replace the Battery in a Maserati Car Key?

Here is the method to replace the battery in a Maserati key: 1. Remove the mechanical spare key head. 2. Locate the screws on both sides and unscrew them using a T6 screwdriver. Then, use the T6 screwdriver to remove another screw inside the mechanical key opening. The entire outer shell of the key can then be taken off. 3. Use a small screwdriver to pry open the black plastic block of the key, revealing the electronic board inside. There is a Torx screw on the electronic board; continue using the T6 screwdriver to unscrew it, and you will see the battery and can replace it. Here are some related details: 1. Taking the 2021 Maserati Ghibli as an example, its body dimensions are: length 4974mm, width 1945mm, height 1484mm, wheelbase 2998mm, fuel tank capacity 80l, and curb weight 2020kg. 2. It features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 330PS, maximum power of 243kW, maximum torque of 450Nm, and is paired with an 8-speed automatic transmission.
16
4
Share

How often should the spark plugs of Haval H6 be replaced?

Haval H6 spark plugs should be replaced once a year or every 10,000 kilometers, whichever comes first. Spark plugs are a crucial component of the gasoline engine's ignition system, which introduces high voltage electricity into the combustion chamber and causes it to jump the electrode gap to generate sparks, thereby igniting the combustible mixture in the cylinder. In terms of body dimensions, the Haval H6 measures 4600 mm in length, 1860 mm in width, and 1720 mm in height. As for power, the Haval H6 is equipped with a 1.5T turbocharged engine and a 2.0T turbocharged engine, with maximum power outputs of 124 kW and 165 kW, and maximum torques of 285 Nm and 385 Nm, respectively, paired with a 7-speed dual-clutch transmission.
20
1
Share

What Causes a Motorcycle Rectifier to Overheat?

It is normal for a motorcycle's rectifier to generate slight heat during operation. However, excessive heat may indicate issues such as a damaged rectifier, excessive power consumption by electrical components in the circuit, or a short circuit fault. Possible causes include: Charging Coil: The charging coil is faulty, resulting in excessively high AC charging voltage output. Quality Issues: The rectifier has inherent quality defects or internal electronic tube failure causing a short circuit. Solution: Promptly take the motorcycle to a repair shop for inspection and maintenance. Function of the Rectifier: The motorcycle rectifier serves to rectify and regulate voltage. The magneto in a motorcycle generates unstable AC voltage, which increases proportionally with engine speed and can exceed 60 volts. The rectifier converts this AC voltage into DC and regulates it to around 14 volts for use by the motorcycle's electrical components, including battery charging. If the rectifier is damaged, the battery will not charge properly.
5
2
Share

How to Determine the Distance Between a Wall and the Front of the Car

Methods to determine the distance between a wall and the front of the car are as follows: 1. Park the car by the roadside and measure a distance of 30 centimeters. Adjust the right rearview mirror to the commonly used state, assume a normal driving posture, and make a mark at the position on the lower edge of the front windshield where the straight line from the driver's eyes to the curb passes. Alternatively, you can simply remember this position without making a mark. 2. Adjust the rearview mirror to the commonly used state, maintain a normal sitting posture, and avoid leaning forward while reversing. Slightly raise your head to see the lower edge inside the left rearview mirror. Stop the car when you just see the base of the wall, shift to neutral, engage the handbrake, and measure the actual distance with a ruler. This measurement will serve as a reference for future parking. In practical use, you can adjust the distance based on your actual measured data.
5
5
Share

What Causes the Noise When the Clutch Pedal is Fully Depressed?

Specific causes are manifested in the following points: 1. Many car owners are accustomed to pressing the clutch pedal and keeping their foot on it even after shifting gears. Maintaining this habit for a long time can cause damage to the clutch. Solution: Remove your foot from the clutch pedal after shifting gears. 2. If the noise occurs when the pedal is fully depressed and disappears when released, it indicates a loose or broken clutch damping spring. Solution: Replace the clutch damping spring promptly. 3. If the noise occurs when the clutch is just engaging or disengaging while repeatedly pressing the pedal, it suggests loose rivets or excessive wear of the spline. Solution: Replace the rivets or spline promptly. 4. If there is intermittent collision noise, it may be due to axial movement of the release bearing. Solution: Replace the release bearing return spring promptly.
4
0
Share

Can You Press the Brake Directly Without Depressing the Clutch During Hill Start?

Hill start cannot be performed by pressing the brake directly without depressing the clutch. Here is the relevant information: Precautions for hill parking: Before ascending the slope, adjust the direction to the correct position in the shortest time possible. When ascending, turn on the right turn signal and move closer to the right side of the field, ensuring the right side of the car is parallel to a solid line on the right side of the road. The distance between the car body and this solid line should not exceed 30 cm, and the car must not touch the solid line. Pay attention to the coordination between the clutch, accelerator pedal, and parking brake lever, as well as the timing of releasing the parking brake lever. Precautions for hill start: When braking during hill parking, the clutch must be depressed. The function of the clutch is to cut off the engine's power when shifting gears or parking. If the clutch is not depressed in time when the car is about to stop, maintaining the connection between the engine and the vehicle speed will cause the engine to stall due to excessively low RPM. Therefore, fully depressing the clutch when stopping can prevent the engine from stalling.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.