Has the 4WD Issue of the 2021 GLC Been Resolved?

2 Answers
Correia
07/24/25 9:06am
The 4WD issue of the 2021 GLC has been resolved. Introduction: The Mercedes-Benz GLC can essentially be considered as the coupe version of the GLK, but with some unique coupe elements added, giving it a sporty character. Power Specifications: In terms of power, the new car will include multiple power configurations. The gasoline engines are expected to offer 1.8T, 2.0T, and 3.0-liter V6 options. Space: With the rear seats fully folded down, the transition is smooth. It features a long engine hood, 5 driving mode options, and the GLC's trunk space offers more spacious seating and storage capacity than the previous generation model.
Was this review help?
1
4
Share
DelAndres
08/11/25 4:28am
As an ordinary car owner, I've been driving the 2021 GLC for almost three years. I've seen some forum posts mentioning occasional glitches with the 4WD system, but personally, I haven't encountered any major issues. Mercedes' 4WD system is quite reliable in daily use—it handles corners steadily and performs well on rainy highways. In my opinion, any new car might have minor bugs initially, but manufacturers surely fix them through software updates. If you're concerned, you can check the Mercedes app for recall notices or visit a dealership for inspection and routine maintenance. Overall, this model is highly dependable for daily commutes—don't let old forum posts scare you.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

Can ETC be canceled after being processed?

ETC can be canceled after being processed. The ETC is affixed to the center of the car windshield, directly behind the rearview mirror. The installation position of the ETC should not obstruct the solar panel and should prevent blocking the driver's line of sight. The steps for reissuing an ETC are: 1. Bring the invalid ETC card to the bank card issuing location; 2. Apply for reactivation of the ETC card and fill out the application form; 3. After the application is approved, activate the ETC card. Once activated successfully, it can be used normally. The method to remove the ETC is: 1. Use a hairdryer to heat the contact surface between the ETC device and the glass to soften it before removal; 2. Soak a towel in hot water and heat the adhesive tape behind the device; 3. Use a scraper to remove the adhesive tape to take it off.
1
4
Share

What are the solutions when the car won't start in the morning?

The solutions when the car won't start in the morning are: 1. The car battery is low on power or the battery circuit is faulty, requiring circuit inspection or battery activation; 2. Low temperature causes reduced viscosity and rotation speed of the engine oil, you can try pressing the clutch before starting the engine; 3. Issues with the ignition system, requiring inspection of the vehicle's spark plugs and high-voltage wires; 4. Insufficient fuel in the car, always check the fuel level in the tank while driving, and refuel in time when the fuel level approaches the warning position; 5. Excessive carbon deposits inside the vehicle's engine, requiring timely cleaning. The steps to start the vehicle are: 1. Turn the key to the ON position and pause to wait; 2. After the dashboard icons flash and go out, turn to the START position to ignite.
15
3
Share

Is the 'a' button for internal or external air circulation?

The 'a' button is neither for internal nor external air circulation. This 'a' button activates the automatic mode, where sensors will automatically determine whether to use external or internal air circulation based on air quality. The car air conditioning system is a crucial component in vehicles, differing from home air conditioners in that it features both internal and external circulation modes. During high-speed driving when opening windows is inconvenient, you can activate the external circulation mode. When passing through areas with heavy dust or during traffic jams, the internal circulation mode can be used. If external circulation is enabled during traffic congestion, exhaust fumes may enter the cabin. It's essential to regularly replace the cabin air filter during routine vehicle use, as failure to do so may affect passenger health and reduce air conditioning efficiency.
8
5
Share

What engine does the BYD L3 use?

BYD L3 has used two engines in total, one is a 1.5L naturally aspirated engine, and the other is a 1.8L naturally aspirated engine. The 1.5L naturally aspirated engine has 109 horsepower and a maximum torque of 145 N·m; the 1.8L naturally aspirated engine has 122 horsepower and a maximum torque of 160 N·m. BYD L3 is a compact sedan from BYD, with a body size of 4568mm in length, 1716mm in width, and 1480mm in height, and a wheelbase of 2615mm. In terms of appearance, the front face of the BYD L3 features a wide and thick double horizontal bar grille that is simple and elegant. The overall shape of the headlights adopts a teardrop design, and the smoked black design adds a sporty style to the vehicle.
7
1
Share

Is it normal for the high beam of a bi-xenon headlight to have a shadow in the middle?

It is normal for the high beam of a bi-xenon headlight to have a shadow in the middle. High and low beams: The intensity of the light is adjusted based on the distance of the filament. The high beam is focused at its focal point, emitting light that is parallel and highly concentrated, providing greater brightness and the ability to illuminate distant and high objects. The low beam is positioned outside its focal point (between 1x and 2x the focal distance), emitting light in a divergent pattern, which illuminates a larger area at closer distances. Function of high beam: It enhances visibility and expands the field of view. On dark roads without streetlights, the visible range with the high beam on is significantly greater than with only the low beam. Therefore, using the high beam in such conditions is highly necessary.
13
3
Share

How to Turn Off the Rear Wiper of a Vehicle?

To turn off the rear wiper of a vehicle, simply push the control lever to the 'OFF' position. The wiper lever positions include: 1. 'INT' for automatic intermittent operation—pull the lever down one notch, and the wiper will work intermittently; 2. 'LO' for continuous operation—pull the lever down one notch, and the wiper will operate continuously at a set rate; 3. 'HI' for continuous high-speed operation—pull the lever all the way down, and the wiper will work at high speed, suitable for heavy rain conditions. The wiper is a blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its function is to clear rain, snow, and dust from the windshield that obstruct the view.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.