Has Multiple-Choice Questions Been Removed from Subject One?

1 Answers
Silas
09/08/25 8:37am
The driving license test for Subject One does not include multiple-choice questions. The test consists of 100 questions, divided into single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," if a candidate answers 11 questions incorrectly during the test, the system will automatically submit the test and end the examination. Subject One, also known as the theoretical test or driver's theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test is conducted on a computer, with a time limit of 45 minutes. Subject One test content: Driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject One test precautions: Candidates should pay attention to their attire during the test; no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. Upon entering, verify your identity at the assigned seat and begin the test. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it; unsigned reports are considered invalid. There is no limit to the number of times you can schedule the Subject One test. Each subject can be taken once, with one retake allowed if you fail. If you do not take the retake or fail it, the test ends, and you must reschedule. For Subject Two and Subject Three, there are only five attempts. If all five attempts fail, the previously passed road driving skills test scores remain valid. Steps to schedule the Subject One test online: Open the Comprehensive Traffic Safety Service Management Platform and select your province or city. Choose "Exam Scheduling." Click "Register Now." Fill in user information: Enter your ID number and the phone number used during registration, as shown: Select user type: Choose "First-time applicant for a motor vehicle driving license." Enter the SMS verification code, as shown: Read and agree to the terms and conditions, then click "Next." Confirm the information is correct and click "Next," as shown: Exam scheduling: Select the subject, test venue, and scheduling period, enter the image verification code, and click "Next," as shown: Choose the date and session: The system offers two scheduling modes—self-selecting exam sessions or allowing the system to arrange the exam, as shown: If you choose the self-selection mode, you can select one or multiple sessions. If you choose the system-arranged mode, the system will automatically match eligible sessions within your selected period. After selection, click "Next" to confirm and submit. Confirm submission and review the information again. If correct, click "Complete." After successful submission, the system generates a transaction number. The system will schedule the exam and announce the results on the scheduled date. There are three subjects in the driving test: Subject One, Subject Two, and Subject Three. Subject One refers to the road traffic safety laws, regulations, and related knowledge test. Subject Two refers to the field driving skills test. Subject Three consists of two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after Subject Three, so it is commonly referred to as Subject Four. However, the official term (as per the Ministry of Public Security's Order No. 123) does not include "Subject Four."
Was this review help?
9
4
Share
More Forum Discussions

What are the precautions after replacing new brake pads?

After replacing brake pads, the following precautions should be noted: 1. The thickness of a new brake pad is generally around 10mm. When visual inspection shows the thickness has reduced to about 1/3 of the original (approximately 3mm), the owner should increase self-inspection frequency and be ready to replace them. 2. If a metallic scraping sound is heard when lightly applying the brakes, the brake pads should be replaced immediately. This indicates the wear indicators on both sides of the brake pads are directly rubbing against the rotor, showing the pads have exceeded their limit. 3. As brake pads wear thinner, braking performance will be affected. Deeper depression of the brake pedal will be required to achieve the same braking effect that previously required only light pressure, with noticeably reduced braking effectiveness in the initial pedal travel.
5
0
Share

What are the causes of brake noise in the e300l?

e300l brake noise is caused by: 1. The surface of the brake pads aging or sharp edges; 2. Severe wear of the brake pads; 3. Deformation or rusting of the brake discs. Taking the 2021 Mercedes-Benz e300l as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5078mm, width 1860mm, height 1484mm, wheelbase 3079mm, and a fuel tank capacity of 66l. The 2021 Mercedes-Benz e300l features a multi-link independent suspension in the front and a multi-link independent suspension in the rear. It is equipped with a 2.0l turbocharged engine, delivering a maximum horsepower of 258ps, a maximum power of 190kw, and a maximum torque of 370nm, paired with a 9-speed automatic manual transmission.
16
0
Share

Is the Jetta VS5 a Volkswagen car?

Jetta VS5 is a Volkswagen car, and it is the first SUV model under the Jetta brand. Taking the 2019 Jetta VS5 as an example, it is a compact SUV with body dimensions of: length 4419mm, width 1841mm, height 1616mm, wheelbase of 2630mm, fuel tank capacity of 51l, and a body weight of 1310kg. The 2019 Jetta VS5 features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum torque of 250Nm, and maximum power of 110kW, paired with a 5-speed manual transmission.
11
2
Share

What is the function of the car radar?

The function of the car radar is to detect the distance between the vehicle body and other vehicles or obstacles, and to inform the driver of the surrounding situation through sound or display, thereby avoiding unnecessary friction or collisions during parking or reversing. The reasons for radar malfunction include: 1. Failure of the buzzer or display; 2. Damage to the reversing radar circuit; 3. Loose connection between the buzzer or display and the main unit. The working principle of the radar is: under the control of the controller, the sensor emits ultrasonic signals. When encountering an obstacle, an echo signal is generated. After the sensor receives the echo signal, the controller processes the data to determine the position of the obstacle. The distance is then displayed on the display, and a warning signal is issued to achieve the purpose of safe parking.
7
4
Share

How Long Is the General Lifespan of Tires?

Tires typically have a service life of around 5 years, with the exact duration being influenced by driving habits, temperature, and environmental conditions. More relevant information is as follows: 1. Tires are rubber products and generally last 5 to 6 years. Over time, they will age, leading to cracking, which increases the risk of blowouts. Additionally, tires have tread patterns; if these patterns wear flat, the grip will decrease, making the vehicle more prone to skidding. These factors can compromise driving safety, necessitating tire replacement. 2. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and temperature extremes during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning properties.
10
0
Share

How to reset the tire pressure light on the Lavida?

Method to reset the tire pressure light on the Lavida: 1. Restore tire pressure: First, you need to restore the tire pressure to the normal value. After restoring to the normal value; 2. Press and hold the tire pressure monitoring button: Press the tire pressure monitoring button on the right side of the gear lever and hold it for about five seconds to reset the tire pressure light. If the tire pressure light comes on, be sure to check the condition of the tires. Reasons why the tire pressure warning light may come on: 1. The tire inflation pressure is too low; 2. The structure of the tire is damaged; 3. The vehicle is loaded on one side; 4. The wheels on the axle are overloaded.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.