Has Electric Vehicle Technology Matured Yet?

1 Answers
DeAaliyah
07/30/25 5:22am
Not yet fully matured. Here is the relevant introduction to new energy electric vehicles: Power Source: The power source provides electrical energy to the drive motor of electric vehicles, which converts the electrical energy from the power source into mechanical energy. Currently, the most widely used power source is lead-acid batteries. However, with the advancement of electric vehicle technology, lead-acid batteries are gradually being replaced by other types of batteries due to their low energy density, slow charging speed, and short lifespan. Components: These include the electric drive and control system, mechanical systems such as the drivetrain, and working devices designed to accomplish specific tasks. Core: The electric drive and control system is the core of an electric vehicle and also the most significant difference that sets it apart from internal combustion engine vehicles.
Was this review help?
2
1
Share
More Forum Discussions

Can the first maintenance of a new car be done at any 4S store nationwide?

The first maintenance of a new car can be done for free at any 4S store of the same brand nationwide. The maintenance manual of the vehicle includes the addresses of 4S stores, and you can choose the nearest one. Just bring the first maintenance voucher and the vehicle maintenance manual when getting the first maintenance done. Precautions before the first maintenance: 1. The valid time for the first maintenance varies depending on the brand and model of the vehicle; 2. After purchasing a new car, it is necessary to consult the sales consultant or after-sales service consultant for the specific first maintenance time to prevent missing the free first maintenance service; 3. Imported cars do not have free first maintenance services, and the cost of the first maintenance needs to be borne by the owner.
2
5
Share

What are the differences between Toyota Fortuner and Toyota Runner?

Here is an introduction to the differences between Toyota Fortuner and Toyota Runner: 1. Exterior comparison: (1) The Toyota Fortuner has dimensions of 4795/1855/1835mm (L/W/H), a wheelbase of 2750mm, minimum ground clearance of 225mm, and tire specifications of 265/65R17. Its exterior continues Toyota's family design language, featuring an inverted trapezoidal front grille with three chrome-plated horizontal slats, complemented by body decals and a rugged front bumper design. (2) The Toyota Runner measures 4705/1880/1840mm (L/W/H) with the same 2750mm wheelbase, but has a slightly lower ground clearance of 193mm and uses the same 265/65R17 tires. Its bold design enhances the vehicle's presence, resembling the Sequoia with muscular body lines that evoke a charging rhinoceros. The slightly concave side panels add a dynamic touch to this aggressive SUV. 2. Interior comparison: (1) The Fortuner offers a spacious and comfortable cabin with a streamlined one-piece dashboard. Its exceptionally large interior provides ample customization space, featuring foldable second and third-row seats that can accommodate over ten people when fully folded, making it ideal for travel or business use. (2) The Runner's interior primarily uses a two-tone color scheme with light-colored accents throughout. It comes equipped with full leather-wrapped seats, a satellite navigation system, and a multifunctional central display that offers passengers diverse options while adding numerous practical features and safety enhancements.
4
1
Share

How to Reset the Maintenance Light on a Bora?

To reset the maintenance light on a Bora: 1. Turn off the ignition switch; 2. Press and hold the button next to the speedometer with your right hand for about 30 seconds, then turn on the ignition switch. The mileage display light will flash or show the word "service"; 3. Rotate the clock adjustment button next to the speedometer clockwise; 4. Turn off the ignition switch and restart the vehicle. The Bora is FAW-Volkswagen's first independently designed model, with body dimensions of 4523mm in length, 1775mm in width, and 1467mm in height, a wheelbase of 2610mm, a top speed of 200km/h, and front-wheel drive.
10
3
Share

How to Engage Reverse Gear?

Engaging reverse gear can be done in the following ways: 1. The reverse gear is located at the position of the sixth or seventh gear, marked with a capital letter R. After depressing the clutch, simply shift into the position marked R; 2. For some vehicles, you need to press the gear lever downward before engaging reverse gear, otherwise, no matter how hard you try, you won't be able to shift into reverse; 3. Some gear levers have a ring that you can pull upward with your finger to engage reverse gear; 4. A few vehicles have a button on the gear lever that must be pressed to engage reverse gear; 5. Quickly flick the lever to the left to directly engage reverse gear; 6. For automatic transmission vehicles, simply pull the gear lever downward in the direction indicated to the R position.
11
5
Share

What does it mean when the brake warning light is on?

The reasons for the brake warning light being on are: 1. Insufficient brake fluid. When the driver presses the brake pedal, the force applied is transmitted by the piston in the master cylinder to make the brake pads contact the wheels, thereby stopping the vehicle; 2. Damaged tail light bulb. The brake fluid reservoir has upper and lower level marks. When the brake fluid level drops below the lower mark, the sensor next to the reservoir detects this and triggers the brake warning light on the dashboard; 3. Severely worn brake pads. Brake pads come in two types: those with wear sensors and those without. Brake pads with wear sensors will automatically complete a circuit when worn to the limit, triggering the warning light. Brake pads without sensors won't trigger an automatic warning but will produce a metallic scraping sound to indicate they need replacement.
13
3
Share

What are the symptoms of a dirty throttle body?

The symptoms of a dirty throttle body are: 1. When accelerating, you may feel the throttle is sticky, heavy, the car accelerates slowly, the RPM rises sluggishly when pressing the throttle at idle, with delayed response, and the car speed drops immediately when releasing the throttle while driving; 2. It affects the precision and smoothness of engine air intake, with a noticeable issue being potential idle shaking or even stalling, as well as unsteady acceleration when pressing the throttle. The causes of a dirty throttle body are: 1. Driving environment, poor air filter performance, high dust levels in the surrounding environment; 2. Low-quality engine oil with high evaporation rate; 3. Oil vapor and impurities from the crankcase; 4. After turning off the engine, the throttle cannot seal completely, allowing dust to accumulate over time.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.