Has anyone successfully maintained their driver's license level?

1 Answers
DiElle
07/30/25 4:55am
Maintaining a driver's license level is illegal. For motor vehicle drivers who fail to complete the downgrade and license replacement procedures within the specified time, the vehicle management office shall announce the invalidation of the driving qualification for the corresponding vehicle class. Relevant information about driver's licenses is as follows: 1. Introduction: The People's Republic of China Motor Vehicle Driver's License, referred to as the driver's license or "driver's permit," is a mandatory certification required for motor vehicle drivers under the laws of the People's Republic of China. 2. Examination content: The test subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
Was this review help?
7
1
Share
More Forum Discussions

What is the highway ETC system?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop tolling system. Highways are equipped with one or more ETC lanes. ETC tolling method: Through dedicated short-range microwave communication between the onboard RFID tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, the system connects with the bank's backend settlement system via network technology. This allows vehicles to pass through bridge and road toll stations without stopping to pay tolls. Banks issuing such ETC express cards typically operate on a post-payment basis. ETC application requirements are as follows: Provide the original and photocopies of the vehicle owner's valid ID and vehicle registration certificate. The photocopy of the driver's license must include the page with the most recent annual inspection stamp. A bank debit card application form is required to bind the ETC card. After obtaining the card, the vehicle owner can visit designated bank branches to receive and install the ETC onboard device free of charge, with no additional costs incurred. Applicants must be aged between 18 and 60 and own a vehicle registered under their name. Documents required for company vehicles: An introduction letter from the vehicle owner (with official seal); a copy of the organization code certificate or business license (with official seal); the agent's original ID card; the original vehicle registration certificate; and the vehicle requiring ETC installation. Below are precautions for ETC installation: Do not obstruct the driver's view; it is best installed behind the rearview mirror. Many vehicle models have steeply angled windshields, which can reduce the driver's field of vision. Installing the ETC device without considering this may increase blind spots. Placing it behind the rearview mirror on the right side avoids obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel for self-charging. Therefore, avoid installing it on the windshield's blacked-out areas or positions that may block the solar panel. Do not remove the device once installed: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. Once installed, the windshield presses this lever in. If removed, the lever pops out, triggering the switch and locking the electronic tag, rendering it unusable. Unlocking requires visiting an ETC service center. This mechanism prevents multiple vehicles from sharing one device.
14
1
Share

Can You Still Drive with Low Engine Oil Level?

You should not continue driving with low engine oil level as it can cause engine wear. Reasons why you shouldn't drive: When the oil pressure is low, the oil cannot properly lubricate all engine components. If you continue driving, the internal engine parts will experience dry friction, leading to increased wear. In severe cases, this can cause component failure. Therefore, you must not drive when the oil pressure is too low. How to handle low engine oil level: If the engine oil level is low, you can simply add more oil to continue driving. However, when adding oil, make sure the level remains slightly below the mark on the dipstick.
16
1
Share

What is the function of the auto button in a car?

Auto button in a car refers to the automatic function of the air conditioning system. Function of the auto button: After pressing the auto button, the air conditioning system will automatically adjust the temperature, cooling or heating, and fan speed based on the data detected by the in-car sensors. Compared to manual controls, automatic air conditioning provides a much more comfortable experience, and this feature is commonly found in mid-range vehicles. Meaning of the window auto button: There is also an auto button in the window control section, which refers to the automatic operation of the windows. Without the auto function, the driver needs to hold the window switch continuously to open or close the window. However, with the auto window button, pressing the switch once will automatically complete the opening or closing process, eliminating the need to hold the button.
11
3
Share

What are the pros and cons of installing a differential lock?

The advantage of installing a differential lock is that it allows all wheels of the vehicle to receive effective power in off-road conditions, helping to escape difficult situations; the disadvantage is that it must be engaged while the vehicle is stationary. Function of differential lock: Manual mechanical differential locks are technically simple and low-cost to produce, yet they remain the most reliable and effective equipment for enhancing a vehicle's off-road performance in the drivetrain system. They enable a complete mechanical connection between the two half-shafts, providing strong durability. However, differential locks should only be used in extreme off-road conditions or emergencies, as using them during normal driving can cause severe damage to components like tires. Precautions for installing a differential lock: Except for fully automatic limited-slip differentials or differential locks, others require drilling holes in the original rear axle housing to connect control lines or pipes to the exterior. Even factory-original models will have this additional hole.
9
1
Share

Can the Bubbled Rear Window Film of a Car Be Peeled Off?

It is possible to peel off the bubbled rear window film of a car. Here is some relevant information: 1. The bubbled rear window film can be removed, but care should be taken when peeling it off. First, use a device similar to a hairdryer to heat the film, then spray some water, which will make the film much easier to remove. 2. From a certain perspective, car window film is a semi-finished product. Half of it depends on quality, and the other half on installation. Both the quality of the film and the skill of the installation can be factors leading to bubbling. Additionally, many car models come with a defogging function on the rear window glass, which is equipped with electric heating wires. 3. When the defogging function is activated, the heat generated increases the temperature difference between the inside and outside of the car, causing the film and the glass to expand and contract at different rates. Some low-quality films with poor adhesion are more prone to bubbling.
19
4
Share

What kind of damage to a license plate makes it illegal to drive?

Motor vehicle license plates with fractures, severe damage, blurred characters, or significant peeling of the base paint cannot be driven and should be replaced immediately. Documents required for license plate replacement: Original and copy of the identity proof of the motor vehicle owner; "Motor Vehicle License Plate Application Form" (please read the instructions on the back of the form carefully when filling it out), signed by the authorized person for company vehicles or by the owner for personal vehicles; if handled by an agent, the original and copy of the agent's identity proof must also be submitted (if the agent is a company, the original and copy of the handler's identity proof are also required), along with a written authorization from the motor vehicle owner, and the agent must sign the "Motor Vehicle License Plate Application Form". License plate replacement process at the DMV: Fill out the "Motor Vehicle License Plate Application Form"; submit the required documents (vehicle registration certificate, original ID and its copy, damaged license plate); pay the fee and receive a temporary license plate. Temporary license plates can be applied for a maximum of three times, after which the application will be locked and no further applications can be made.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.