Has anyone been penalized for traffic violations with temporary license plates?

Can the Geely Emgrand GL be registered for Didi Express?

Geely Emgrand GL can be registered for Didi Express. Below is a detailed introduction about the Geely Emgrand GL: 1. Safety: The Geely Emgrand GL provides a comprehensive safety solution covering six aspects: driving safety, driver assistance systems, information assistance and safety warnings, active collision avoidance safety, passive collision safety, and accident alert and rescue. 2. Intelligent Interaction System: The Geely Emgrand GL is equipped with a 3.5-inch TFT color screen driving system, an 8-inch touchscreen, and other intelligent connectivity systems. Additionally, it features strong technological capabilities in GPS navigation, voice control, and other functions, offering high intelligence and convenience.

17

2

Share

What is the difference between dry and wet transmissions?

The differences between dry and wet transmissions are as follows: 1. Transmission efficiency: The structure of a wet clutch is more complex, resulting in higher energy loss, so the transmission efficiency of a wet dual-clutch transmission is lower. 2. Response speed: A dry clutch transmits power through direct contact of metal plates, making power transmission more direct. When the metal plates are pressed together, the transmission ratio increases, resulting in immediate and noticeable effects. In contrast, a wet clutch relies on oil. The process involves the driving plate accelerating, increasing the centrifugal force of the oil, and then the driven plate accelerating, adding an extra step, which makes the response speed slightly slower. 3. Torque capacity: The metal friction plates of a dry clutch cannot withstand too much torque. If subjected to excessive stress impact, the friction plates can easily be damaged. Therefore, dry clutches are only suitable for vehicles with small displacement and low torque output.

8

1

Share

What is the model of the original tires on the Peugeot 301?

The Peugeot 301 comes with two tire models: 185/65R15 and 195/55R16. In 185/65R15, the first number 185 represents the tire width of 185MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 15 stands for the rim diameter of 15 inches. The letter "R" in the middle denotes a radial tire. In 195/55R16, the first number 195 represents the tire width of 195MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 stands for the rim diameter of 16 inches. The letter "R" in the middle denotes a radial tire. The Peugeot 301 is equipped with Giti Comfort221 tires, and the spare tire specifications include both non-full-size and full-size options. If you want to replace the tires yourself, you can follow these steps: Retrieve the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and at a right angle to the ground; Remove the hub cover and loosen the nuts counterclockwise, but do not fully unscrew them—just enough to eliminate resistance. Keeping the tire on the ground when first loosening the nuts ensures that the nuts, not the tire, are being turned; Turn the nuts counterclockwise until they are loose, repeating this step for all lug nuts, then fully remove the nuts; Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, tires are marked with the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, e.g., standard rim 5.00F.

13

1

Share

What is the fuel consumption of the Levin?

The combined fuel consumption of the Levin is 5.9L/100km. Currently, there are 2 models of the Levin on sale: the Premium Edition and the Luxury Edition, both with a combined fuel consumption of 5.9L/100km. The above figures are based on the NEDC combined fuel consumption, which is measured under the NEDC test cycle. The actual fuel consumption is higher, ranging from 7.0-7.5L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid sudden acceleration, as this can significantly increase fuel consumption. Light acceleration and braking, early braking: While driving, gently press the accelerator to avoid sudden increases in engine RPM and prevent the car from shaking, which helps save fuel. By anticipating road conditions and applying slow, even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units, relative to a standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle checks: Timely oil changes can reduce carbon buildup (which can cause poor ignition, sluggish acceleration, increased fuel consumption, and even engine misfires in severe cases). Regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Close the windows while driving. Open windows increase wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.

19

0

Share

What is the actual fuel consumption of the CS95 owner's test?

The actual fuel consumption of the Changan CS95 is around 10-13 liters per 100 kilometers. This is because the Changan CS95 is equipped with a 2.0T engine, which delivers a maximum horsepower of 233hp, providing relatively good performance in terms of power. Additionally, due to the larger and heavier body of the CS95, as well as its higher stance leading to a higher drag coefficient, the fuel consumption tends to be on the higher side. Below are some related details: 1. Factors affecting fuel consumption: When evaluating a vehicle's fuel consumption, it's not just about the listed data; other parameters such as tire width, vehicle weight, vehicle height, and engine displacement also significantly impact fuel consumption. 2. Performance of the 2.0T engine: This 2.0T engine is tuned to emphasize low-end torque performance, making daily driving feel quite brisk and effortless, unlike the typical feel of a mid-to-large SUV, thus offering a very relaxed driving experience.

14

2

Share

Can You Use a Bicycle Pump to Inflate a Flat Car Tire?

You can use a bicycle pump to inflate a flat car tire. Here is more information about inflating car tires: 1. Reason: Household cars generally use low-pressure tires with a tire pressure of 2.2-3.0 bar, while bicycle tires usually have a pressure of 3.5-4.5 bar, which is higher than car tires. Therefore, as long as the valve types match, an ordinary bicycle pump can be used to inflate car tires. 2. Working Principle: A pump draws air into a storage chamber by pulling and then injects or replenishes air into various tires and some balls by pushing. When the outer tube is pulled up, air enters the inner tube through small holes at the bottom of the outer tube. When the handle is pushed down, the air passes through a one-way valve at the top of the inner tube and flows through the hose into the tire valve. 3. Introduction to Pumps: A pump (also known as an inflator) draws air into a storage chamber by pulling and then injects or replenishes air into various tires and some balls by pushing. The most common pumps today are made of stainless steel, mainly because stainless steel has strong oxidation resistance, a long service life, is rust-resistant, corrosion-resistant, not easily deformed, lead-free, safe, hard, wear-resistant, and durable, making it widely used for various balls, bicycles, motorcycles, etc.

10

0

Share

Has anyone been penalized for traffic violations with temporary license plates?

Can the Geely Emgrand GL be registered for Didi Express?

What is the difference between dry and wet transmissions?

What is the model of the original tires on the Peugeot 301?

What is the fuel consumption of the Levin?

What is the actual fuel consumption of the CS95 owner's test?

Can You Use a Bicycle Pump to Inflate a Flat Car Tire?

What does CC mean when referring to motorcycles?

Can You Release the Clutch Immediately After Shifting Gears?

What is the fuel consumption of the Changan CS95?

How to Replace the Air Conditioning Filter in a Honda CR-V?