Geely Emgrand: Should I Use 92 or 95 Octane?

1 Answers
LeReed
07/29/25 11:46am
Geely Emgrand GS has a fuel grade requirement of 92# or above on its fuel cap. Generally speaking, 92 octane gasoline is sufficient for the Geely Emgrand GS. However, if it's a new car, it is recommended to use 95 octane gasoline first, which is beneficial for the running-in period of the car and engine maintenance. 95 Octane Gasoline: 95 octane gasoline is suitable for gasoline cars with an engine compression ratio between 10 and 11.5. Choosing 95 octane gasoline can ensure more complete combustion, reduce carbon deposits, and provide better power performance. Introduction to Geely Emgrand: Geely Emgrand is a sub-brand under the parent brand of Geely. It is equipped with a 1.3T GeTec DVVT turbocharged engine, featuring front-wheel drive and a maximum power output of 98kw. Emgrand advocates excellence, robustness, and prestige as its brand proposition, representing Geely's development direction in safety, energy efficiency, and environmental protection.
Was this review help?
8
5
Share
More Forum Discussions

What to Use When Rearview Mirrors Are Unclear on Rainy Days?

When rearview mirrors are unclear on rainy days, the following items can be used: 1. Common household cleaning supplies: These can include soap or dish detergent. Wet a clean cloth, apply soapy water or dish detergent evenly to the rearview mirror, wait for it to dry, and then wipe the mirror clean. This method is low-cost and easy to source, but the effect does not last long and is only suitable for short-term emergency use during rainy travel. 2. Water repellent: There are many specialized rearview mirror water repellents available on the market. Just a light spray forms a nanofunctional film on the mirror's surface, composed of countless microscopic, seamless, and evenly smooth bumps invisible to the naked eye. This reduces the contact area between rainwater and the mirror, preventing water droplets from forming and causing water to slide off quickly, achieving effective water repellency. 3. Installing rain deflectors: Adding rain deflectors is another common method to prevent unclear rearview mirrors on rainy days. On some shopping websites, cheap rain deflectors cost just a few dollars, while more expensive ones are only a few tens of dollars, making them very affordable and easy to install. Once installed, rain deflectors can significantly reduce the likelihood of rainwater landing on the rearview mirror, ensuring clarity. However, this method is only effective when the rain is not too heavy, as its effectiveness diminishes significantly during heavy rainfall.
14
0
Share

What Causes Fogging on the Outside of Car Windows on Rainy Days?

Because there is a temperature difference between the two sides of the glass, the side with higher gas temperature will form fog on the glass. Here are methods to prevent car window fogging on rainy days: 1. Proper use of the air conditioning system: The operation method is to park the car, start the air conditioning, turn the temperature adjustment button to the warm air direction, then press the defrost button, and use the warm air produced by the air conditioning to dry the fog on the windshield inside the car. When defogging, you can switch the air conditioning to external circulation to allow fresh outside air to enter the cabin. Setting the compressor and fan speed to 25°C or higher can speed up the defogging process. 2. Special use of anti-fog products: Before each use, spray evenly on the window and wipe clean, forming a transparent protective film on the glass to prevent fog formation. One application can prevent fogging for about ten days to half a month, depending on the product's effectiveness. In summary, buying anti-fog spray is a convenient but not cost-effective solution, as its effectiveness is short-lived. 3. Open windows for cold and hot air convection: If the fog is not heavy, you can open a small gap in the side windows to allow air convection inside the car, gradually bringing the interior temperature closer to the outside temperature, which will disperse the fog. The advantage is that it achieves the same effect as using the air conditioning without increasing fuel consumption. However, during extreme cold or heavy rain, it is recommended to intermittently open and close the windows.
13
5
Share

Where is the tire pressure sensor installed in the tire?

Tire pressure monitoring sensors can be divided into internal and external types based on their installation positions. Internal sensors are installed inside the tire, which is relatively more stable and provides more accurate temperature monitoring data. External tire pressure monitoring sensors are installed on the tire, usually at the valve stem position. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the tire's rolling radius to monitor pressure. Introduction to the Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, along with a 4-wheel indirect system. Compared to using only a direct system, this hybrid system reduces costs and overcomes the limitation of indirect systems in detecting simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires like a direct system.
13
1
Share

What size battery does the Borui car key use?

The battery model for the Borui car key is CR2025. Here is some relevant information about the Borui: 1. The Borui is a mid-size sedan under the Geely brand. This model is equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.8-liter turbocharged engine. 2. The 1.5-liter turbocharged engine delivers 180 horsepower and a maximum torque of 265 Nm. The engine's maximum power is achieved at 5500 rpm, and the maximum torque is available between 1500 to 4000 rpm. This engine is equipped with a 48V mild hybrid system and features an aluminum alloy cylinder head and block.
16
0
Share

Does Water Entering the Engine Compartment on Rainy Days Have Any Impact?

Start the engine and let it idle for several minutes until it reaches normal temperature to dry the water and moisture on the engine. After confirming the vehicle's technical condition is good, drive at low speed for a short distance and consciously press the brake pedal lightly several times to generate heat through friction between the brake shoes and drums, drying and evaporating any residual water in the braking system to ensure optimal brake performance. If a vehicle experiences water ingress, it is best to take it to an auto repair shop or a professional after-sales service station for repairs, avoiding cheap roadside shops for maintenance. Additional Notes: 1. Remove the negative terminal of the battery as soon as possible to prevent short circuits in the vehicle's electrical components due to water exposure. 2. Immediately inspect the engine, first checking if water has entered the cylinders, as this can bend connecting rods and damage the engine. 3. Check if water has mixed with the engine oil, as this can degrade the oil, reducing its lubricating properties and causing excessive engine wear. 4. Inspect the transmission for water ingress, as water can contaminate the gear oil, leading to gear wear. 5. Check the brake fluid and all four-wheel brakes, as water in the brake fluid can degrade it, resulting in brake failure. 6. If water enters the exhaust pipe, drain it promptly to prevent impurities from clogging the catalytic converter or damaging the oxygen sensor. 7. Inspect the battery for water ingress and replace the electrolyte if necessary.
5
0
Share

How to Turn Off the Driving Lights on a Sagitar?

Sagitar driving lights can be turned off by sitting in the driver's seat, using the left turn signal lever to indicate left, then pulling the high beam lever and holding it. Insert the key and turn it to the power-on position without starting the engine, and wait for 4 seconds. Below is an introduction to the Sagitar driving lights: 1. Position lights: Turn the light knob clockwise once to activate the position lights, instrument panel lights, and button indicator lights. 2. Low beam lights: Turn the light knob clockwise once more to turn on the low beam lights. 3. Front fog lights: Pull the button out one notch to activate the front fog lights.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.