Fuel consumption of Geely Vision S1?

2 Answers
SanCarmen
07/28/25 3:36pm
1.5L Geely Vision S1 comes with both manual and automatic transmission options. The manual version uses a 5-speed manual transmission, while the automatic version employs a CVT continuously variable transmission. Their combined fuel consumption is 5.7L/100Km and 5.9L/100Km respectively, while the actual fuel consumption is 7.85L/100Km and 9.18L/100Km. Below is information about the powertrain of the Geely Vision S1: 1. One variant of the Geely Vision is equipped with a 1.5L naturally aspirated engine, which delivers a maximum power of 109 horsepower. 2. Another variant of the Geely Vision features a 1.4T turbocharged engine, producing a maximum power of 133 horsepower.
Was this review help?
10
2
Share
DelJohnny
08/11/25 10:58pm
I have been driving a Geely Vision S1 for over a year, with the combined fuel consumption generally fluctuating between 7.5 to 8.5 liters per 100 kilometers. In congested urban areas, the fuel consumption may surge above 9 liters, especially during rush hours when frequent stops and starts consume more fuel. On the highway, maintaining a speed of 80 to 100 kilometers per hour can reduce consumption to around 6 liters, with steady driving being the most fuel-efficient. Many factors affect fuel consumption, such as rapid acceleration and hard braking, which significantly increase it. Developing smooth driving habits can save a lot. Running the air conditioning at full blast may consume about 1 liter more, so try to avoid prolonged idling in summer. Regular maintenance is also crucial, such as checking tire pressure—too low or irregular wear increases resistance—and keeping the engine clean for efficient operation. Overall, this car's fuel consumption is average for its class, and it’s fairly economical when driven sensibly.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

Why do domestic cars mostly use 1.5T engines?

For automakers, the technical cost is low, and for consumers, the consumption tax and usage costs are low. Low technical cost: 1.5T engines are easier to calibrate, and the technical cost is relatively lower. Compared to larger-displacement naturally aspirated engines, they are more conducive to maximizing mass production benefits. Low tax: According to current policies, the consumption tax for cars with 1.0-1.5L (inclusive) displacement is 3%, while for 1.6-2.0L (inclusive), it is 5%. Low usage cost: Maintenance and usage costs are low, making them suitable for the vast majority of Chinese families, with precise market positioning. Although there are many large-displacement models available, few domestic consumers purchase them. As a result, manufacturers and businesses produce according to this standard.
5
1
Share

What does car mobile phone connectivity mean?

Car mobile phone connectivity mapping, also known as car-machine connectivity, refers to projecting the mobile phone screen onto the vehicle's display, allowing the driver to operate functions such as navigation, videos, music, and games from the phone through the display. The market mainly features three methods: CarPlay, MirrorLink, and AndroidAuto. Introduction to CarPlay: The first is CarPlay, a car system launched by Apple, which only supports iPhones with a Lightning interface. Users can operate it via the vehicle's built-in touchscreen and control buttons, or through Siri's hands-free functionality. It allows for easy and safe calling, listening to music, sending and receiving messages, and using navigation. Introduction to MirrorLink: MirrorLink is an open industry standard for connectivity between smartphones and car systems, jointly established by some internationally renowned mobile phone manufacturers and car makers. Users can project mobile phone applications onto the vehicle's central control display via MirrorLink, with enlarged application icons on the display to reduce operation time while driving. The phone itself can still be operated simultaneously. Introduction to AndroidAuto: AndroidAuto is an operating system developed by Google for cars. This system extends the functionality of Android smartphones to the car's dashboard, displaying it in a manner more suitable for driving. The smartphone's system must be Android 5.0 Lollipop or higher and connected via USB. Of course, the car itself must also be pre-installed with the AndroidAuto system.
2
2
Share

What Causes Steering Wheel Vibration in New Energy Electric Vehicles?

New energy electric vehicle steering wheel vibration is primarily caused by inaccurate four-wheel alignment data and wheel balance issues. Below are detailed explanations: Inaccurate four-wheel alignment data: All four wheels of a vehicle have specific alignment parameters, and they are not simply perpendicular to the ground. It is recommended to perform regular four-wheel alignment checks for your vehicle. If steering wheel vibration occurs when driving between 80 to 90 km/h but disappears when exceeding 90 km/h, this is typically caused by misaligned wheel positioning data. Wheel balance problems: After tires are mounted on rims, some sections of the wheel assembly may be heavier than others, causing vibration during high-speed rotation. It is necessary to check whether the front wheel alignment angles and toe-in meet specifications, and make adjustments if deviations are found. Lift the front axle to rotate the wheels and inspect their static balance condition, as well as check for excessive tire deformation. Deformed tires should be replaced.
10
5
Share

What does the annual inspection check?

Inspection items include: body appearance, braking system, steering system, lighting system, tire system, suspension system, and safety equipment checks for each system. Body appearance inspection: Mainly checks for body cracks, deformations, corrosion, intact and complete window glass, complete left/right and rearview mirrors, as well as wipers, engine, radiator, etc. Braking system inspection: Includes brake system self-check, working condition of the air pressure gauge, air compressor belt, and brake line sealing. Safety equipment inspection: Includes emergency door switches, emergency roof hatches, safety hammers, and fire extinguishers.
6
5
Share

Is There Any Impact If the Tire Pressure Differs by 0.5 Among the Four Tires?

It will increase fuel consumption and may cause the vehicle to pull to one side, affecting driving safety. Normal range of tire pressure difference: Generally, the tire pressure of a car's four tires cannot always be the same, but the difference between the front and rear tires should not be too large. A difference of around 0.1 bar is considered normal. Impact of excessive tire pressure deviation: If the tire pressure deviation is too large, it will cause different driving resistances among the tires. Especially if the tire pressure on both sides of the same axle is different, it may cause the car to pull to one side while driving, affecting driving safety. Moreover, if the tire pressure difference among the four tires is too large, it will also affect the lifespan of the tires themselves and increase fuel consumption. This is because uneven tire pressure can lead to abnormal tire wear. A tire with excessive pressure will concentrate the vehicle's weight on the center of the tread, causing rapid wear in the center. On the other hand, a tire with insufficient pressure can result in uneven contact area with the ground, increased wear, higher rolling resistance, and ultimately increased fuel consumption.
18
5
Share

What is the fuel tank capacity of the Jog 125 scooter in liters?

The Jog 125 scooter has only one model, with a fuel tank capacity of 5.1 liters. Its maximum power is 6.1 kW/rpm, and the maximum torque is 9.7 N·m/rpm at 5000 rpm. The actual displacement is 125 ml. Among vehicles in the same class, the Little Dolphin 110 has a fuel tank capacity of 5 liters. Ways to reduce fuel consumption for motorcycles: Start gently and twist the throttle lightly. For motorcycles with gears, shift gears in a timely manner. Shifting too early or too late is not advisable. Generally, you can listen to the engine sound and must refer to the tachometer—the engine RPM should match the vehicle speed. High throttle or low engine RPM can lead to increased fuel consumption. Always monitor tire pressure, as proper tire pressure can reduce fuel consumption. Both overinflation and underinflation will increase fuel consumption.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.