Fuel Consumption of Dodge Journey 7-Seater SUV?

2 Answers
McJuliana
07/29/25 3:33am
The MIIT comprehensive fuel consumption of the Dodge Journey 7-seater SUV is 8.3-11.3L/100km. Below are some fuel consumption-related introductions: 1. Habits and Road Conditions: Fuel consumption is greatly related to driving habits and road conditions. Avoid heavy acceleration; gradual acceleration when starting is the most fuel-efficient. To save fuel, avoid pressing the accelerator heavily when starting, as heavy acceleration consumes 2 to 3 times more fuel than starting at a normal speed. 2. Braking: Maintaining a safe distance and avoiding frequent braking saves more fuel. If you don't keep a safe distance, you'll often need to brake on the road. When braking, the automatic transmission gear will drop, and the car will have to accelerate again from a lower gear. Starting from a stop or in a low gear requires the engine to consume more fuel.
Was this review help?
4
1
Share
AnastasiaFitz
08/12/25 7:23am
As a long-time owner of the Dodge Journey 7-seater SUV, I have deep feelings about its fuel consumption. In city driving, it typically gets 15 to 18 miles per gallon, while on highways it can reach around 25 mpg. The vehicle's heavy body and seven-seat design create significant wind resistance, making it even more fuel-thirsty during school-run traffic jams. In summer with AC on, the mileage can drop to around 14 mpg. Many factors affect this, such as driving habits: sudden acceleration and hard braking can skyrocket fuel consumption, while gentle driving saves considerable gas money. My experience suggests avoiding aggressive starts, taking back roads instead of congested main routes in urban areas, and maintaining proper tire pressure (underinflated tires increase fuel consumption). Compared to other 7-seat SUVs, the Journey's fuel efficiency is above average - not the most economical but still acceptable. Regarding maintenance costs, monthly fuel expenses are dozens of dollars higher than sedans, but the spacious and practical design makes it worthwhile overall. Regular maintenance like oil changes and air filter cleaning (which I do every 5,000 km) also helps improve fuel efficiency noticeably.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

Is the engine speed not allowed to exceed 2000 rpm in Subject 3?

Engine speed should be kept below 2000 rpm, exceeding which will result in a failing judgment. Here are the relevant details: Introduction: Engine speed exceeding 2000 rpm is considered low-gear high-speed. During the test, engine speed should be maintained around 1500 rpm. If the engine reaches around 1800 rpm, it indicates the need to shift up. Excessive fuel consumption: Failing to shift gears when exceeding 2000 rpm in low-speed gears constitutes lugging the engine. Low-gear high-lug operation forces the engine to run at excessively high speeds. Each engine has its specific speed and power characteristics. Once it exceeds the optimal operating range, fuel consumption increases sharply. Additionally, ultra-high-speed operation places excessive stress on engine components.
3
1
Share

How many points are deducted for crossing the line at a traffic light?

Changing lanes by crossing a solid line at a traffic light results in a deduction of 3 points. At traffic signal intersections, lane changes and crossing lines can easily cause minor traffic accidents. If caught by "electronic police," a fine will be imposed along with a deduction of 3 points. Vehicles crossing the solid yellow line and driving in the opposite direction will also be fined and receive a 3-point deduction. Vehicles not driving in the designated lane, such as choosing to go straight from a left-turn lane, will be fined and receive a 2-point deduction. Violating prohibitive markings refers to actions such as crossing solid lines to change lanes, making U-turns where not allowed, or turning where prohibited, all of which are considered violations of prohibitive markings. In emergencies, immediately call the police to have traffic officers direct traffic on-site. If a vehicle breaks down and crosses the line, the hazard warning lights must be turned on, and the traffic police should be notified as soon as possible to prevent traffic congestion. If a traffic accident is caused by changing lanes over a solid line before a traffic light, the driver will be held responsible for the accident.
6
0
Share

Are There Any Loopholes in the Electronic Monitoring of Subject Three?

No. Below is a detailed introduction to the relevant information: Introduction: The road driving skills test for Subject Three generally includes: vehicle preparation, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. Notes: Candidates must complete the corresponding lighting operations according to the voice prompts. It is essential to be very familiar with these operations and not make any mistakes. Answering one question incorrectly will deduct 100 points, wasting a precious exam opportunity! Therefore, familiarizing yourself with the lighting operations before the exam will basically prevent you from failing on this aspect.
7
2
Share

What Happens When the Intake Manifold Pressure Sensor is Damaged?

When the intake manifold pressure sensor is damaged, it will be unable to calculate air flow, resulting in issues such as no idle, weak acceleration, unstable engine operation, backfiring during rapid acceleration, and popping (due to either too lean or too rich air-fuel mixture). The ECU relies on three key components for its operation: the coolant temperature sensor, the intake pressure sensor, and the crankshaft position sensor. If the intake pressure sensor is damaged, the ECU loses accurate data on the intake air volume, leading to malfunctions. The intake pressure sensor, also known as MAP (Manifold Absolute Pressure), connects to the intake manifold via a vacuum hose. It senses changes in vacuum within the intake manifold as engine speed and load vary, converting these changes into voltage signals through internal resistance adjustments. These signals help the ECU adjust fuel injection and ignition timing. In carbureted or throttle body fuel-injected engines, the intake manifold refers to the pathway from the carburetor or throttle body to the cylinder head intake ports. Its function is to distribute the air-fuel mixture from the carburetor or throttle body to each cylinder's intake port. In port fuel-injected engines or diesel engines, the intake manifold solely distributes clean air to each cylinder's intake port. The intake manifold must distribute the air-fuel mixture or clean air as evenly as possible to each cylinder. To achieve this, the lengths of the gas flow paths inside the intake manifold should be as equal as possible. Solution for a damaged intake manifold pressure sensor: It is necessary to promptly visit a local 4S shop for inspection and repair.
4
5
Share

How Many Years for a Driver's License?

Learning to drive certificate is valid for three years. The following is a detailed introduction to relevant information: Introduction: Applicants who learn to drive on the site and road should obtain a learning to drive certificate in accordance with the regulations. The learning to drive certificate is valid for three years, and the applicant should complete the subject two and subject three tests within the validity period. If the test is not completed within the validity period, the passed subjects will be invalidated. Notes: The actual validity period starts when the student passes subject one and obtains the "Driving Skills Test Permit" paper. From this day, the three-year validity period officially takes effect. The paper also clearly states the start and end time of the three-year validity period.
9
1
Share

Which color of the 7th-generation Elantra is the most popular?

Hyundai's 7th-generation Elantra offers six body colors. Here are the specific details: Introduction: The available colors include Polar White, Phantom Black, Ice Blue, Space Gray, Vibrant Orange, and Flame Red. The top and second-top trim models also feature optional two-tone body colors. Model Introduction: The all-new 7th-generation Hyundai Elantra boasts a 'Parametric Jewelry Body Sculpture,' with rising wedge-shaped waistlines that create a three-dimensional and robust appearance, while its fastback design highlights a sporty feel. In terms of dimensions, the 7th-generation Elantra measures 4680mm in length, 1810mm in width, 1415mm in height, with a wheelbase of 2720mm, making it slightly larger than its competitors, the Nissan Sentra and Toyota Corolla.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.