Fuel Consumption of Baojun 510 Automatic Transmission?

1 Answers
SanArcher
07/29/25 10:49am
Baojun 510 automatic transmission has a combined fuel consumption of approximately 6.6L/100km. The actual fuel consumption may vary depending on road conditions, vehicle weight, and other factors. Methods for calculating fuel consumption: Measure the amount of fuel added in one refill, record the distance traveled, and then calculate the vehicle's fuel consumption. The fuel consumption obtained through these two methods represents the average fuel consumption of the vehicle. Ways to save fuel: When driving in the city, traffic jams are common. Experienced drivers often plan their routes in advance to avoid congested areas, as reducing frequent starts, stops, and maintaining an economical speed helps save fuel.
Was this review help?
16
4
Share
More Forum Discussions

Why are some Honda logos red?

Honda's red background logo generally refers to the high-performance version of Honda cars. It represents fiery passion and blood-like excitement, and this version is called the Type-R version. The following is a detailed introduction to the Type-R: 1. The new-generation Civic Type-R concept car has undergone significant improvements in the front face and rear, with the new design language fully revealed. The large rear wing and dual quad exhaust pipes at the rear seem to showcase its impressive performance. The Honda Civic Type-R concept car is equipped with a large-sized spoiler at the rear, with the taillights also integrated into the spoiler. Additionally, the new car features a dual twin-exhaust four-tailpipe design and a brand-new wheel hub style. 2. In terms of appearance, the Type-R concept car adopts an aerodynamic exterior kit, with a highly impactful front face and an exaggeratedly styled spoiler on the rear. The dual quad exhaust layout highlights its unique identity. 3. In terms of power, the new car is expected to be equipped with a 2.0T turbocharged engine, with a maximum power of 310Ps and a maximum torque of 400Nm. It will be paired with a 6-speed manual transmission and feature front-wheel drive. The 0-100 km/h acceleration time for this high-performance Civic is expected to be controlled at 5.7 seconds.
20
2
Share

How many degrees is one full turn of the steering wheel?

One full turn of the steering wheel is 360°, and a quarter turn is 90°. You can think of the steering wheel as a clock. The correct hand position is left hand at the 9 o'clock position and right hand at the 3 o'clock position. To turn 90°, you would turn the wheel one full turn plus an additional quarter turn. Below are some related details about steering wheel operation: 1. Beginners practicing steering don't need to worry about exact degrees turned. Just follow the principle: 'Turn as much as needed, return as much as turned; turn less, return less; turn slowly, return slowly; turn more, return more; turn quickly, return quickly.' The amount of turn can be judged by the steering wheel markings or by observing the direction of the car's front and body. 2. Drive at about 15 km/h on an open road surface while turning the steering wheel left and right to check if it moves smoothly, returns to center properly, and whether the car drifts when you release the wheel.
10
0
Share

What is the fuel consumption per 100 kilometers for the Lamando?

The 2022 Lamando has 7 models on sale. Among them, the Lamando L-280TS-DSG Spicy Edition, Shiny Spicy Edition, Hot Spicy Edition, Super Spicy Flagship Edition, Comfort Edition, and Luxury Phantom Edition, all equipped with a 150 horsepower engine, have an NEDC fuel consumption of 5.92L per 100 kilometers. The 230TSI-DSG Fashion Edition, equipped with a 131 horsepower engine, has an NEDC fuel consumption of 5.4L per 100 kilometers. The fuel tank capacity is the same for different Lamando models. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 150 horsepower engine and an NEDC fuel consumption of 5.92L per 100 kilometers, the fuel tank capacity is 51L, and the distance that can be covered with a full tank is 51/5.92*100=861km. For models equipped with a 131 horsepower engine and an NEDC fuel consumption of 5.4L per 100 kilometers, the fuel tank capacity is 51L, and the distance that can be covered with a full tank is 51/5.4*100=944km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
18
5
Share

When Does the First Maintenance Period Start?

The first maintenance date for a car is calculated from the date of vehicle pickup, which is typically around 3 months or 3,000 kilometers of driving. Different car brands have varying requirements, so it's advisable to refer to the owner's manual. After purchasing a new car, the 4S store usually requests the owner to perform the first maintenance within 3,000 kilometers. Here are some precautions for the first car maintenance: 1. Before going for the first maintenance, it's best to call the 4S store to make an appointment. Due to the increasing number of vehicles, service workshops at 4S stores are often overcrowded. Without an appointment, you might end up waiting outside for hours without getting a spot. 2. When going for maintenance, certain items are essential to bring, such as the user manual and the vehicle registration certificate. 3. If you encounter any issues or have questions while driving, note them down and inform the staff during the first maintenance registration. This helps the technician to check all the problems during the first maintenance.
19
0
Share

How to Deal with Overly Hard Brake Pads?

Here are the methods to handle overly hard brake pads in cars: 1. Minimize braking distance to protect the brake pads. First, use the engine's braking effect by downshifting to reduce speed, then lightly apply the brakes. This shortens the braking distance and reduces wear on the brake pads. 2. Pay special attention to maintaining a safe following distance during daily driving, decelerate in advance, and avoid emergency braking. Especially when traffic lights are flashing, do not rush through. 3. During normal driving, if not braking, the foot should be kept off the brake pedal. Even hovering over it is not advisable, as it can easily increase brake pad wear. Develop the habit of immediately releasing the pedal after braking to free both feet.
4
4
Share

Is it necessary to install underbody armor for the Vios?

Generally, it is recommended to install underbody armor as it can prevent rust and reduce noise. It also serves as a form of protection for the vehicle's underbody. The functions of underbody armor are as follows: 1. Impact Protection: While driving, it is inevitable for small stones to be kicked up, which can impact the vehicle's underbody. Over time, this can cause significant damage. Installing underbody armor can prevent such impacts, thereby protecting the integrity of the underbody. 2. Anti-Scraping: On different road surfaces, there may be raised areas that can cause wear to the underbody. Installing underbody armor can prevent this wear, offering better protection for the underbody. 3. Anti-Corrosion: In regions with frequent rain, such as southern areas, acid rain can easily splash onto the underbody, leading to corrosion over time. Additionally, residual water from car washes can further corrode the underbody. Underbody armor can help avoid such unnecessary corrosion. 4. Heat Insulation: During hot summers, high ground temperatures can cause heat to transfer from the underbody into the car. If the air conditioning is on, more fuel will be needed to lower the interior temperature. Installing underbody armor can significantly block this heat, maintaining a comfortable interior temperature and reducing fuel consumption.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.