For Front-Wheel Drive Cars, Should New Tires Be Placed in the Front or Rear?

2 Answers
OJayla
08/26/25 5:44am
When the car is a front-wheel drive vehicle, new tires should be placed in the front. Below are the reasons for placing tires in the front and the situations where they should be placed in the rear: Reasons for placing tires in the front: Because front-wheel drive cars require higher grip from the front wheels, during sudden braking, the car's center of gravity shifts forward. If the front wheels lack sufficient grip, it can easily lead to an accident. Therefore, new tires for front-wheel drive cars should be installed on the front wheels. Situations where tires should be placed in the rear: For rear-wheel drive cars, it is best to replace the rear tires. Since rear-wheel drive vehicles have their power output at the rear wheels, their characteristics make the rear wheels more prone to slipping. If the tread wear on the rear tires is severe, it becomes even easier to lose grip, increasing the risk of the vehicle losing control. Therefore, if you are driving a rear-wheel drive car, it is advisable to install new tires on the rear wheels to prevent the danger of losing control due to insufficient tire grip.
Was this review help?
16
2
Share
KhloeMarie
09/08/25 8:08am
As someone who has driven for many years, I believe it's better to place new tires at the rear. For front-wheel-drive vehicles, the front tires are the driving wheels and wear out quickly, but placing new tires at the rear is safer, especially in rainy or icy conditions. If the rear tires lose traction, the car is prone to skidding and losing control. New tires with deeper treads can grip the road better, reducing accidents. I've seen a friend place new tires at the front, and the car skidded while turning, almost causing an accident. In fact, many repair shops recommend placing new tires at the rear to ensure stability. Of course, if budget allows, replacing all four tires at once is ideal to avoid future concerns. Remember to regularly check tire pressure and wear to extend tire life. In short, safety first—don't take risks to save money.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

Why is it mandatory for trucks to install BeiDou and what are its functions?

Here are the specific functions of the BeiDou system for trucks: 1. Quick positioning upon startup: It can achieve positioning within seconds after startup, whereas cold-start initial positioning time for other satellite navigation systems like GPS takes several minutes. 2. Position reporting while positioning: It enables two-way message communication between users, user management departments, and ground centers to transmit location and other information, a feature not available in other satellite navigation systems. 3. High-precision time service function: Through two-way timing, it can provide time service with an accuracy of 20ns, another feature not available in other satellite navigation systems. 4. Group command function: The command-type user terminal's information reception capability allows for tree-like management of group users.
10
4
Share

Why was the Lavida Pure Electric discontinued?

Lavida Pure Electric has not been discontinued, and the currently available model is the 2019 Premium Edition. Exterior and interior of the Lavida Pure Electric: The Lavida Pure Electric adopts the same design style as the fuel-powered Lavida, with distinctions made in areas such as the front grille, wheel rims, and body badges. The instrument panel features more blue accents, and the tachometer has been replaced with information related to the motor and battery. Power and range of the Lavida Pure Electric: It is equipped with an electric motor that delivers a maximum power of 100kW (136Ps) and a maximum torque of 290Nm. The NEDC range reaches 356km. It features a five-level adjustable coasting energy recovery system, offering options to switch between 'Off, D1, D2, D3, B'.
13
5
Share

What is the process for B2 point deduction review education?

Here is a detailed introduction to the B2 point deduction review education process: 1. Login: Click on the internet service platform, select the corresponding province/city, click "Personal Login" in the upper right corner, enter the relevant information as prompted to complete login and access the personal homepage. 2. Application: Click "Full-point Review Education" → "Review Education Application", then select "Online Education". 3. Study: Click "Full-point Review Education" → "Review Education Services", choose "Review Education Online Learning", and follow prompts to enter the learning interface to complete required studies. 4. Processing: Click "Full-point Review Education" → "Review Education Services" → "Review Education Application", follow instructions to complete the "Review Service Application". 5. Confirmation: Check "Online Processing Progress" to verify if the transaction is completed.
11
2
Share

How to Determine Which National Emission Standard Your Vehicle Meets?

There are several methods to determine which national emission standard your vehicle meets: 1. Check the vehicle's environmental protection label. There is usually a clear marking on the back of the label attached to the vehicle. 2. Visit the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center to inquire. 3. Bring the motor vehicle registration certificate (original or copy) to the vehicle management office for inquiry. 4. Make a rough estimation based on the year your vehicle was registered. Most vehicles registered after 2008 meet National IV standard; vehicles registered in 2007 may meet either National III or National IV standard; vehicles registered before 2007 mostly meet National III or National II standard; and vehicles registered before 2005 mostly meet National II standard.
15
3
Share

Should the Yellow and Red Dots on Tires Face Outward?

The hollow yellow dot indicates the position with the least longitudinal vibration of the tire, while the solid red dot indicates the position with the greatest longitudinal vibration. When installing tires, the yellow and red dots on the tire should face outward. Below is more information about tire replacement: 1. The side that needs to face outward will be marked with 'outside.' The position with the yellow dot is the lightest part of the tire, while the position with the red dot indicates the heaviest part. 2. After replacing the tires, it is necessary to rebalance all four wheels. Otherwise, the wheels may vibrate at high speeds. When performing wheel balancing, always choose a professional shop with specialized equipment and trained personnel. 3. For wheel alignment, it is also essential to select a professional shop with the right equipment and expertise. Incorrect wheel alignment data can lead to uneven tire wear or vehicle misalignment. 4. When using a tire mounting machine to install tires, apply lubricant to the tire.
16
4
Share

Do All Four Tires Need to Be Replaced at the Same Time?

Under normal circumstances, it is better to replace all four tires together for the following reasons: 1. Different tire tread patterns can result in varying levels of traction, affecting the vehicle's grip. Having the same tread pattern on all four tires ensures consistent traction across all wheels. If tires with different tread patterns must be used together, ensure that tires with the same pattern and similar wear are placed on the same axle to avoid performance issues caused by uneven traction. 2. If tires on the same vehicle are rotated regularly, their wear levels should be similar. If one tire becomes unusable, the others are likely in the same condition. 3. Tires have a limited lifespan, typically up to six years. Beyond this period, the risk of tire blowouts increases significantly. Therefore, even if some tires still have good tread, they should be replaced after six years. (Note: If a tire is damaged due to impact, one or two tires can be replaced individually, but ensure that tires on the same axle have matching tread patterns.)
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.