···
Log in / Register

Focus Air Filter Replacement Tutorial?

4 Answers
LaVivienne
09/02/25 2:21am

Focus air filter replacement tutorial is as follows: 1. Wait for the car engine to cool down, open the front passenger door, and move the front passenger seat to the rearmost position. 2. Remove the fuse box cover under the front passenger seat by pressing the two yellow buttons with your hands. 3. After removing the cover, there is a vertical outer cover inside. Press the switches on both sides with your hands and pull it off. 4. Twist the old air filter while pulling it out. 5. After removing the old air filter, start the car, turn on the air conditioner and use high-speed wind to blow the outlet. Install the new air filter in the same way, squeeze it towards the center before installation, and pull it a few times after installation to restore the air filter to its original shape.

Was this review help?
14
5
Share
VanCassandra
09/14/25 4:44am

I just helped my brother replace the air filter for his Ford Focus, and the steps were super simple, saving a lot of money. First, turn off the car key to ensure safety. Sit in the passenger seat, open the glove box, and locate the side clips or screws; press down the clips or unscrew them to lower the glove box. The filter is hidden under the windshield, with a small cover that can be opened with a gentle push. Remove the old filter and discard it, then insert the new filter with the arrow pointing toward the front of the car—make sure not to reverse it. Reattach the cover and reset the glove box. The whole process takes just over ten minutes and doesn’t require professional tools. Remember to choose the right model, like an activated carbon filter for better odor and dust removal. I recommend replacing it every six to twelve months, especially when the AC starts to smell. After finishing, test the AC for a minute in a shaded area—if everything works, you're good to go!

Was this review help?
18
5
Share
Expand All
AmaraDella
10/28/25 5:28am

DIY changing the air filter for my Focus was so much fun! First step is to turn off the engine and avoid touching any electrical components. Gently open the glove compartment on the passenger side—some models have clips that release it flat when pressed. Locate the filter housing under the windshield, then pull out the old dirty filter and discard it. When inserting the new filter, ensure the airflow arrow points downward before securing the cover tightly. The whole process takes under 10 minutes, saving you 200-300 bucks on shop fees. I used an affordable standard filter that’s also eco-friendly. After replacement, the AC delivers noticeably fresher air—just handle everything gently to avoid cracking plastic parts. Making this a regular habit (say, periodic replacements) is definitely rewarding!

Was this review help?
6
4
Share
Expand All
RachelRose
12/11/25 5:44am

I learned to change the cabin air filter because I was worried about dust in the car. First, park the car safely and turn off the ignition. Sit in the passenger seat and slowly open the glove box, gently releasing the clips. The filter is located near the windshield—pull it out carefully and replace it with a new one, making sure the arrow points downward to avoid misalignment. After finishing, reassemble everything carefully. I change it every six months to prevent allergies and save money for groceries. The whole process takes about 20 minutes—no need to rush to avoid hurting your hands.

Was this review help?
20
3
Share
Expand All
More Forum Discussions

What size tires does the Haval F7 use?

The Haval F7 uses two different tire specifications: 225/55r19 and 225/65r17. Typically, higher-end models are equipped with larger wheels, which require correspondingly larger tires. Tires operate under complex and demanding conditions, enduring various deformations, loads, and extreme temperatures during driving. Therefore, they must possess high load-bearing capacity, traction performance, cushioning capability, and wear resistance. In terms of exterior design, the car's side profile presents a robust appearance, with multiple character lines enhancing the sense of layering. The chrome-trimmed window lines rise towards the rear and taper at the tail, adding visual tension.
12
0
Share

Is ETC mandatory on highways now?

Highways can be accessed without ETC. Because ETC is not mandatory to install. Since January 1, 2020, vehicles without ETC will no longer enjoy various toll reduction policies, and can only pay tolls through manual lanes when passing toll stations. It may be a bit inconvenient during holidays. ETC is just a different toll collection method and has nothing to do with whether you can access highways. There are two toll collection methods on highways: manual toll collection and ETC toll collection. ETC is the abbreviation of Electronic-Toll-Collection, meaning electronic toll collection system. To apply, you need to provide the original and photocopy of the owner's valid ID card and vehicle license. If it is not the owner who applies, you also need to bring the agent's valid ID card. The photocopy of the vehicle license needs to include the page with the most recent annual inspection stamp; a bank card for deducting highway tolls; aged between 18 and 60; and the vehicle must be under the individual's name. How ETC works: Through the on-board electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane of the toll station, and uses computer networking technology to settle accounts with the bank in the background, allowing the vehicle to pay highway or bridge tolls without stopping when passing through highway or bridge toll stations. Benefits of installing ETC: Save time: Avoid the hassle of queuing and waiting; Green and environmentally friendly: Green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and pollution; Save wear and tear: Save costs, reduce the frequency of vehicle starts and stops, reduce wear and fuel consumption, and users can enjoy toll discounts; Improve efficiency: The passing efficiency of ETC lanes can theoretically be increased by 2-3 times or more, making traditional ETC updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
9
1
Share

What are the signs of poor tire grip?

Tires with insufficient grip will make the car feel unstable while driving, and understeer may occur when cornering. For cars with poor grip, it is necessary to reduce speed when entering a corner to ensure that understeer does not occur. Drivers will feel that the car is difficult to control. Grip mainly depends on parameters such as tire tread pattern, tread depth, road surface conditions, and vehicle load. There are two ways to increase the friction between the tire and the ground. The first is to increase the friction coefficient of the road surface. The so-called "friction coefficient" refers to the road surface's ability to provide grip for the tire. The higher the friction coefficient, the greater the grip. Different road surfaces, such as asphalt, concrete, and gravel, have different friction coefficients and thus provide varying levels of grip for the tire. The second method is to increase the tire's own friction coefficient, which can be achieved by choosing softer tires. Softer tires provide stronger grip but wear out faster. To increase the tire's contact area with the road surface, the simplest method is to switch to wider tires. Another option is to use tires with fewer tread patterns, which can increase the actual contact area between the tire and the ground, but this may affect grip performance on wet or slippery surfaces. With a given contact area, the tire's potential can be fully realized through correct tire pressure and precise suspension tuning. The tire's contact area is always smaller when driving on a flat straight road compared to when stationary, and it decreases even further when driving on uneven roads or cornering due to vertical or lateral forces, sometimes even losing contact with the ground entirely. The ultimate goal of suspension improvement is to keep the tire in contact with the ground as much as possible, especially when cornering or driving on uneven surfaces.
4
1
Share

How to Replace the Battery in a Geely Key?

Method for replacing the battery in a Geely key: 1. Press the button on the side of the vehicle key to remove the mechanical key; 2. Use a tool to pry open the buckle under the key casing to separate the outer shell; 3. Once the outer shell is pried open, the key casing can be accessed; 4. Remove the old battery and replace it with a new one, then snap the casing back into place to complete the process. Geely Holding Group owns brands such as Geely Auto, Lynk & Co, Volvo Cars, Polestar, and Proton. Taking the Geely Emgrand as an example, its body dimensions are 4631mm in length, 1789mm in width, and 1470mm in height, with a wheelbase of 2650mm. The shield-shaped contour of the Geely Emgrand features a 'V' design, symbolizing the brand's entry into the high-end automotive sector with a stance of luxury, stability, and strength.
16
4
Share

Do You Need to Watch the Entire Car Maintenance Process?

At a regular 4S dealership, you don't need to watch the entire car maintenance process. 4S shops use standard techniques and genuine auto parts, so major issues are unlikely to occur during maintenance. The content and purpose of car maintenance are as follows: Car Maintenance Content: Modern car maintenance primarily includes servicing the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Purpose of Car Maintenance: The purpose of car maintenance is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration, and extend the service life.
13
3
Share

What does 5w40 engine oil mean?

5w40 engine oil represents the following: w stands for winter, the preceding 5 indicates the lowest temperature at which the engine can start, and 40 represents the viscosity level, with higher numbers indicating higher viscosity. 5w40 engine oil is suitable for electronically fuel-injected gasoline engines equipped with crankcase ventilation devices and catalytic converters operating under various conditions. Engine oil serves to lubricate and reduce friction in the engine, assist in cooling, and provide sealing to prevent leaks. It consists of two main components: base oil and additives. The base oil is the primary constituent of the lubricant, determining its fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, imparting new characteristics, making them an essential part of the lubricant.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.