Fault Diagnosis and Repair of Automotive Ignition System?

How many seconds does the Sylphy take to accelerate from 0 to 100 km/h?

According to official data, the Sylphy comes in two engine displacements: 1.2L and 1.6L. The 1.2L Sylphy takes 11.4 seconds to accelerate from 0 to 100 km/h, while the 1.6L model takes 11.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is applied to propel the vehicle, resulting in faster acceleration. The 1.2L Sylphy has a torque of 159 Nm and accelerates from 0 to 100 km/h in 11.4 seconds, while the 1.6L model has a torque of 155 Nm. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The 1.2L Sylphy is equipped with a CVT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The 1.2L Sylphy has a power-to-weight ratio of 108 Hp/T and accelerates from 0 to 100 km/h in 11.4 seconds, while the 1.6L model has a ratio of 131 Hp/T and takes 11.8 seconds.

5

0

Share

What is the urban fuel consumption of the Nissan Qashqai?

Nissan Qashqai's combined fuel consumption is 6.2-6.4L/100km. There are currently 4 models of Nissan Qashqai available for sale. The TOP flagship version has a fuel consumption of 6.4L/100km. The Prem luxury version, Prem.Pro luxury navigation version, and XV intelligent version have a fuel consumption of 6.2L/100km. The above figures are NEDC combined fuel consumption, which is the comprehensive fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.9-8.5L/100km. The specific factors affecting car fuel consumption are as follows: Vehicle weight: Larger and heavier vehicles consume more fuel. Generally, small family cars with 1.6L displacement and weighing about 1.2 tons have a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while SUV models weighing about 1.5 tons have a fuel consumption of 8.5 liters. Different weights result in different fuel consumption. Air resistance: Higher air resistance increases fuel consumption during driving. Vehicles with better aerodynamics have lower air resistance, which leads to lower fuel consumption. Economical RPM: During driving, the engine has an optimal torque output point where fuel consumption is minimized. Generally, small-displacement cars reach this point at about 70 km/h, while large-displacement cars reach it at about 100 km/h. Maintaining speed within this economical RPM range results in the least fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching red lights will increase fuel consumption.

19

0

Share

Does the T-Roc have heated rearview mirrors?

The T-Roc is equipped with heated rearview mirrors. The button for the heated rearview mirror function is located near the door handle, next to the car window control buttons. To activate the heating function, simply turn the knob to the marked position for heated rearview mirrors. This feature is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thereby reducing driving hazards. How to use the heated rearview mirror function: There are generally two ways to activate the heated rearview mirror function. One is combined with the electric rearview mirror adjustment knob—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is required, as there is an adjustment button on the driver's side. Principle of the heated rearview mirror function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature, usually between 35-60 degrees Celsius, within a few minutes. Heat will dissipate from both left and right rearview mirrors. Simultaneously, due to the rising temperature and evaporation, water droplets on the mirror surface will gradually shrink, and fog will slowly disappear, effectively defogging and deicing the mirror. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the heated rearview mirror function: The principle of the heated rearview mirror involves electric heating wires embedded in the mirror, which consume a significant amount of power. When using this function, ensure the car is in an ignited state. Avoid activating the heated rearview mirrors while the car is stationary to prevent draining the car battery, which could lead to insufficient power for starting the vehicle. Other methods for defogging rearview mirrors include: Opening windows for air circulation: Crack open both side windows slightly to allow air exchange between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.

15

2

Share

What are the differences between poloplus and polo?

Differences between poloplus and polo: 1. Different tire specifications: poloplus tire specification is 185/65r15; polo tire specification is 185/65r14. 2. Different engine models: poloplus engine model is ea211dmb; polo engine model is dlx. 3. Different power: poloplus maximum horsepower is 113ps, maximum power is 83kw, maximum torque is 145nm; polo maximum horsepower is 110ps, maximum power is 81kw, maximum torque is 150nm.

13

1

Share

What brand is the doubleking tire?

doubleking tire is a product of Shuangwang brand from Shandong. The functions of tires are: 1. Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; 2. Working together with the car suspension to mitigate the impact during driving and dampen the resulting vibrations; 3. Preventing severe vibrations and early damage to car components, adapting to the high-speed performance of the vehicle and reducing driving noise; 4. Transmitting traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and passability.

1

2

Share

What does Buick 652t mean?

652t is the rear badge of the Regal, representing the model equipped with a 2.0t engine. The engine model is LSY, a 2.0L turbocharged four-cylinder engine featuring direct fuel injection technology and an aluminum alloy cylinder head and block. It delivers a maximum horsepower of 237 PS, a maximum torque of 350 Nm, and a maximum power output of 174 kW. The engine is paired with a 9-speed automatic transmission. Taking the 2020 Regal 652t as an example, its body dimensions are: length 4913mm, width 1863mm, height 1462mm, with a wheelbase of 2829mm.

14

0

Share

Fault Diagnosis and Repair of Automotive Ignition System?

How many seconds does the Sylphy take to accelerate from 0 to 100 km/h?

What is the urban fuel consumption of the Nissan Qashqai?

Does the T-Roc have heated rearview mirrors?

What are the differences between poloplus and polo?

What brand is the doubleking tire?

What does Buick 652t mean?

What Causes the Squeaking Noise When Braking on the Boyue Pro?

What is the reason for no signal from the Audi boost pressure sensor?

Where is the trailer hook on the Envision?

What to Do When the Front Windshield Fogs Up on Rainy Days?