Explanation of the Functions of the Changan CS75's Central Control Buttons

1 Answers
McStephanie
07/30/25 6:14am
The central control console is located in the center of the car's interior, highlighting its importance. Comfort and entertainment features such as air conditioning and audio are controlled via buttons arranged on the central control console. Both the driver and front-seat passengers frequently interact with the central control console, whose design and layout significantly impact the car's comfort and the driver's experience. It can be said that the central control console reflects, to some extent, a car's comfort and functionality, serving as an important benchmark for assessing the vehicle's manufacturing quality. For consumers, evaluating a car's central control console primarily involves three aspects: the material and craftsmanship, the intuitiveness of button function labels, and the ease of operation. Regarding the material and craftsmanship, generally, higher-priced models feature better materials for the central control console, though this also varies based on the vehicle's positioning. Models targeting business use or emphasizing comfort tend to have superior materials and craftsmanship in their central control consoles.
Was this review help?
12
4
Share
More Forum Discussions

Can paint touch-up be done during car maintenance?

Paint touch-up can be performed during car maintenance. Vehicle maintenance includes body inspections and door adjustments, which don't require separate repair requests or incur additional charges. If paint peeling requiring touch-up is discovered during inspection, factory defects covered by warranty will be addressed during the warranty period, while user-caused damage requires additional payment from the user. The meaning and purpose of car maintenance: Car maintenance refers to the periodic preventive work involving inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain automotive components, also known as vehicle servicing. Currently, car maintenance mainly covers engine systems, transmission systems, air conditioning systems, cooling systems, fuel systems, power steering systems, etc. The function and objectives of automotive paint: The primary role of car paint is to protect the vehicle body from corrosion. Additionally, automotive paint enhances the vehicle's aesthetic appeal. Automotive paint is a type of coating. The purpose of a paint booth is to provide a clean, safe, and well-lit painting environment for automotive coating operations, ensuring painting quality by preventing dust interference during the spraying process.
18
0
Share

What is the simplest way to improve low-end torque?

Methods to increase low-end torque in cars are as follows: 1. Change wheels and tires: Switching to smaller diameter wheels and tires, though the effect is minimal and may cause speedometer inaccuracies. Install a turbocharger and use higher octane gasoline. 2. Adjust the transmission: Alternatively, major modifications like engine replacement or transmission tuning can be made, though none of these are recommended. It's best to use the vehicle with its original power output as improper modifications may affect the car's lifespan and even compromise safety in severe cases. Introduction to turbocharging: 1. History of turbocharging technology: The power output characteristics of turbocharged engines differ from naturally aspirated engines, which is why many consumers prefer vehicles equipped with turbocharged engines. The power delivery of turbocharged engines is more suitable for stop-and-go urban driving. Turbocharging technology was originally developed for aircraft engines to address insufficient air intake at high altitudes. 2. Principle of turbocharging: Turbocharged engines feature a turbocharger consisting of two main components - a compression turbine and an exhaust turbine. When the engine reaches certain RPM, the exhaust gas has sufficient energy to drive the exhaust turbine, causing the compression turbine to rotate as well. This allows the compression turbine to compress air and force it into the cylinders.
4
3
Share

Why Does a Truck Suddenly Stall While Driving?

The reasons for a truck stalling on the road include electrical circuit faults, component failures, fuel system issues, etc. Detailed reasons for a truck suddenly stalling are as follows: 1. Electrical circuit fault: This could be due to low-voltage power failure while driving, causing the engine to stall. In this case, you can mainly check the ignition and starter switches, as well as the fuse box. 2. Low-voltage circuit short circuit causing stalling: In this situation, the stalling occurs intermittently. Check your low-voltage circuits. 3. Component failure: This issue is usually related to the ignition coil, capacitor, or electronic ignition module. The vehicle may start initially, stall after a while, then start again, only to stall once more. 4. Fuel system fault: Damage to the fuel pump, fuel line rupture, clogged carburetor fuel inlet, or an empty fuel tank. However, in these cases, the vehicle can still be restarted, though with difficulty. 5. Overheating of the ignition system: Problems with the engine overheating or the anti-explosion system can also cause stalling.
19
4
Share

How to Determine if the Brake Master Cylinder is Faulty?

To determine if the brake master cylinder is faulty, follow these steps: 1. Use a breaker bar to loosen the wheel nuts. 2. Lift the vehicle off the ground, remove the wheel nuts, and take off the tire. 3. For disc brake calipers, use a screwdriver to pry the caliper apart. 4. Have one person press the brake pedal while another observes if the brake pads clamp onto the rotor. If they do, the caliper is functioning properly; if not, check for air in the brake fluid. 5. For drum brake wheel cylinders, first inspect externally for any oil leakage. Leakage indicates a faulty wheel cylinder; if no leakage is found, proceed to disassemble for further inspection. 6. Remove the drum brake cover using a Phillips screwdriver. 7. Insert two metal rods to hold the brake shoes in place. Have one person press the brake pedal while another observes the wheel cylinder's operation. If the wheel cylinder expands outward when the brake is applied, it is functioning correctly; if not, the wheel cylinder is faulty.
10
1
Share

Why does the car make abnormal noises when starting after rain?

After rain, fine sand carried by water adheres to the brake discs, and the rust formed on the brake discs is equivalent to tiny particles. If there are tiny particles between the hard brake pads and the gray cast iron brake discs, there will be sharp noises. Stepping on the brakes a few times to grind off the small particles will solve the problem. Here is an introduction to related content: 1. Traffic accidents: Rainy days are high-incidence weather for traffic accidents because the driver's visibility decreases in the rain, the friction between the tires and the ground is reduced, and the gloomy weather brings depression to people, making traffic accidents more likely to occur. 2. Preventing tire side-slip: On rainy days, the ground is wet, and the friction of rubber products like tires is greatly reduced when they get wet, which can easily cause tire side-slip. Therefore, when turning, you should not brake suddenly. It is best to slow down in a straight line before entering the curve.
16
3
Share

Full or Partial Tinting for Front Windows?

It is necessary to reserve the small triangular area on the side windows; otherwise, it can significantly impact driving safety. Precautions for window tinting: When applying tint film, it is essential to choose high-quality film and have it installed by a professional shop. Low-quality tint film may not meet light transmittance standards, which can affect the driver's visibility during nighttime driving. It is not recommended to apply tint film to the front windshield, as this may impair the driver's view. When tinting the driver and passenger side windows, two sections should be cut out to ensure the driver can clearly observe the side rearview mirrors. After applying the tint film, avoid rolling the windows up or down, as this can cause the film to peel off. Lifespan of tint film: Generally, automotive tint film lasts about three years. After removing the tint film, a lot of adhesive residue may remain on the windows. Before removing this adhesive, it is important to soften it to facilitate removal. If the adhesive is not softened and scraped off directly, it can leave many scratches on the glass. After softening the adhesive with alcohol or essential balm, use a plastic scraper to remove it, avoiding hard metal tools that can scratch the glass.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.