Driving Speed and Distance in Foggy Conditions?

2 Answers
LeEllie
07/28/25 9:58pm
When driving in foggy conditions, remember to slow down. The thicker the fog, the shorter the visibility distance, and the lower the speed must be. When visibility is less than 200 meters but greater than 100 meters, the speed should not exceed 60 km/h; when visibility is less than 100 meters but greater than 50 meters, the speed should not exceed 40 km/h; when visibility is within 30 meters, the speed should be controlled below 20 km/h; if visibility is within 10 meters, it is recommended to stop by the roadside. Below is additional information: Precautions for foggy conditions: Maintaining a certain distance between vehicles is crucial when driving in foggy conditions, as the wet and slippery road surface increases the braking distance of vehicles. Therefore, it is essential to keep a safe distance from the vehicle in front to prevent rear-end collisions in case of sudden braking.
Was this review help?
5
2
Share
VanArcher
08/12/25 2:32am
The most crucial things when driving in fog are to slow down and increase your following distance. With over twenty years of driving experience, I never take foggy conditions lightly. Generally, if visibility drops below 100 meters, it's best to keep your speed under 40 km/h. If I encounter patchy fog on the highway, I'll slow down to 30 km/h. Your following distance should be at least double the usual—I learned this the hard way after a rear-end collision caused by following too closely. A practical tip is to pick a reference point: after the car ahead passes it, count to three before you reach the same spot. Also, don’t forget to turn on your fog lights and width indicators—many cars have automatic headlights, but fog lights often need manual activation. Keep your wipers running for clear visibility and use the air conditioning in fresh-air mode to prevent window fogging. If visibility becomes dangerously poor, don’t push it—pulling over safely and waiting for the fog to clear is the wisest move.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

What are the basic items to check in the engine compartment?

Engine compartment basic items check includes engine oil, coolant, and brake fluid levels. Regular oil changes: Engine oil is the lubricant for the engine, serving functions such as lubrication, cleaning, cooling, sealing, and reducing friction. It is also considered the "blood" of the engine. Not changing the oil for a long time can lead to severe wear of engine components and reduce the engine's lifespan. Manufacturers recommend changing the oil every 5,000 or 10,000 kilometers. Therefore, it is advisable to choose higher-quality engine oil. Coolant: Coolant ensures the normal operation of the engine. It is necessary to regularly check whether the coolant level is within the standard range and inspect the coolant reservoir for leaks. On average, the coolant should be replaced once a year. Brake fluid level: Brakes are crucial for driving safety. Brake fluid has strong water absorption properties and can automatically absorb moisture from the air. Therefore, it is essential to regularly check the brake fluid level and top up or replace it if it falls below the standard value.
18
3
Share

How many gears does the Ninja 350 have?

The Ninja 350 has 5 gears. Introduction to the Ninja 350: The Ninja 350 is a product of Kawasaki, a Japanese company, while the domestic version of the Ninja 350 is commonly known as "Horizon" in China. Anyone familiar with the automotive industry knows that Kawasaki does not have production lines in China. The domestic Ninja 350 takes advantage of this by imitating the appearance of the Japanese Kawasaki Ninja model and assembling it locally. In other words, the domestic Ninja 350 belongs to the category of domestic "Horizon" bikes (various imitations of small-displacement foreign sports and street bikes). These bikes are equipped with a variety of engines, with displacements ranging from 250cc to 400cc, but most engines are outdated domestic models with enlarged cylinders. Solutions for difficult gear shifting in the domestic Ninja 350: First, check the clutch to ensure the clutch plates are disengaged. Using high-quality engine oil can also improve gear shifting. Difficult gear shifting is mainly caused by two factors: incomplete clutch disengagement and poor machining of the gears inside the transmission.
17
4
Share

What colors are available for the Jetta VA3?

Jetta VA3 comes in Polar White, Maya Red, Moonlight Silver, Seashell Gold, and Sapphire Blue. Below are the detailed specifications of the Jetta VA3: 1. The Jetta VA3 is a compact family sedan with dimensions of 4501mm in length, 1704mm in width, 1469mm in height, and a wheelbase of 2604mm. 2. The Jetta VA3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 82kW and a maximum torque of 145Nm. The engine reaches its peak power at 6100 rpm and peak torque at 4000 rpm. It features DVVT technology and multi-point fuel injection, with an aluminum alloy cylinder head and block. The engine is paired with either a 5-speed manual transmission or a 6-speed automatic transmission. 3. The front suspension of the Jetta VA3 uses a MacPherson strut setup, while the rear suspension employs a torsion beam. Most compact or small cars use torsion beam rear suspensions due to their lower cost, compact size, and space efficiency. This setup also helps maximize rear passenger and trunk space.
15
4
Share

Where is the cabin air filter located in the Great Wall Haval H6?

The cabin air filter in the Haval H6 is located on the passenger side, beneath the glove compartment near the center console. You can see it by looking up from the floor - the arrow indicates the filter's clip, which consists of three clips in total. Gently pull outward to open it, and you'll find the cabin air filter inside. Below are the steps to replace the cabin air filter: 1. To replace the cabin air filter, first open the glove compartment cover. Locate the fixing clip on the right side of the glove compartment and pull it outward firmly. Remove the fixing clip of the glove compartment cover to detach it. Then, squeeze both sides of the glove compartment towards the center with both hands, and the glove compartment can be taken off. 2. After removing the glove compartment, you will see the cabin air filter cover. Press firmly on the fixing clips on both sides of the cover, and the cover can be removed. 3. Pull the old cabin air filter outward. Install the new cabin air filter and reassemble everything in the reverse order of disassembly (pay attention to the installation direction of the cabin air filter).
12
2
Share

How to Install the Camshaft on a Chevrolet Cruze?

Before installing the camshaft, first lubricate the camshaft with new engine oil, and also lubricate the camshaft bearing seats. The installation method for the Chevrolet Cruze camshaft is as follows: 1. Before installing the camshaft, first install each bearing cap and check if the camshaft holes are misaligned; 2. When installing the camshaft, the camshaft of cylinder 1 must face upwards and not press against the valves; 3. After installing the bearing caps, first alternately tighten the bearing caps of the 2nd and 5th paths diagonally to a torque of 20Nm, then install the bearing caps of the 1st and 3rd paths, and finally install the bearing cap of the 4th path. Tighten all bearing cap bolts to a torque of 20Nm; 4. Install the camshaft oil seal, then install the camshaft half-moon key and timing gear, and tighten the bolts to a torque of 80Nm.
5
3
Share

Can a Motorcycle with Modified Graphics Be Licensed?

Illegal modifications are not permitted, but some modifications are allowed, such as high-performance spark plugs, qualified xenon headlights, body stickers, handlebar guards, license plate frames, color changes, and LED lights. Unauthorized external modifications to motor vehicles cannot be licensed. To modify the external appearance of a motor vehicle, prior application and filing are required before the vehicle can be licensed. Article 16 stipulates: No unit or individual may alter the registered structure, construction, or characteristics of a motor vehicle without authorization. It is prohibited to change the model number, engine number, frame number, or vehicle identification number of a motor vehicle. Common illegal modifications for motorcycles include: Exterior modifications: Unauthorized changes to the body color; raised and lengthened backrests; unauthorized installation of sidecars; and overly exaggerated or unconventional modifications. Lighting modifications: Unauthorized installation of spotlights, strobe lights, or excessively bright headlights. Exhaust modifications: Modified exhaust pipes that produce excessive noise, disturb the public, or have exaggerated appearances. Horn modifications: Unauthorized installation of air horns, significantly increased decibel levels, or imitation of sirens used by police, fire trucks, ambulances, or other special vehicles.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.