···
Log in / Register

Does Windshield Polishing Have Any Impact?

5 Answers
DelEvan
07/29/25 3:25pm

Windshield polishing has no negative impact. After polishing the car's front windshield, it smooths out some of the fine pores on the glass, leaving no marks on the surface while improving the glass's clarity, providing the driver with a clear view. Windshield polishing can protect the front windshield and extend its service life. The specific steps for polishing are: 1. Clean the glass and the surface of the glass polishing sandpaper, ensuring there are no dust, sand, or other particles attached; 2. Before polishing, use a marker to outline the area to be polished on the back of the glass to avoid shifting and causing an overly large polishing area; 3. Use P120, P240, P400, and P600 grit glass sandpaper to remove scratches from the glass; 4. Wipe the glass clean to observe the sanded area, apply polishing solution, and use a polishing wheel or pad to polish, being careful not to move too quickly.

Was this review help?
14
3
Share
Gale
08/14/25 8:14am

Having driven for over a decade myself, I can say that windshield polishing really requires careful consideration. Last year, my car's glass had some minor scratches causing annoying glare while driving, so I took it to a repair shop for polishing. After polishing, it did become much clearer and rainwater rolled off more easily, but the technician warned me not to do it too frequently as it could thin the glass. If you DIY it, improper pressure control may leave wavy marks, making night driving even more troublesome. Also, if the glass has special coatings like a water-repellent film, polishing might remove them permanently. It's advisable to test a small area with polish first. Don't cut corners by going to a roadside shop – find a proper service center. Regular cleaning to reduce dust buildup can also help prolong the polishing effect.

Was this review help?
15
5
Share
Expand All
DelChase
10/11/25 8:22am

As a novice driver who loves tinkering with cars, I've tried windshield polishing once and found both pros and cons quite noticeable. The most immediate benefit is improved visibility - after removing those fine scratches, driving in rainy nights feels less dizzying. But don't get carried away; polishing too aggressively can create uneven glass surfaces that refract light strangely, which is dangerous at highway speeds. Cost-wise, it's economical - just buy a bottle of polishing compound for a few dozen yuan and DIY, like spending an hour on weekends to buff out scratches, which is much cheaper than replacing the glass. However, choosing the right tools is crucial - only slow-speed polishers can achieve even grinding. In the long run, if the glass is severely aged, polishing might actually accelerate cracking, so it's important to assess the overall condition before deciding.

Was this review help?
9
0
Share
Expand All
Lloyd
10/11/25 8:24am

I've studied windshield polishing, and the effects mainly fall into two aspects. On the positive side, it removes fine surface scratches, improving nighttime visibility and reducing hazards. However, from a negative perspective, excessive polishing can weaken the glass strength, leading to decreased impact resistance. Controlling the pressure during operation is crucial—avoid using strong acids or coarse abrasives, as the damage would be irreversible. Cost-wise, it's an economical option, especially effective for new scratches.

Was this review help?
6
2
Share
Expand All
VanOlive
11/25/25 2:42am

Windshield polishing is a double-edged sword from a maintenance perspective. The benefits include enhanced aesthetics and improved rainwater drainage, especially for removing oxidized layers on older car glass. However, significant risks exist: polished glass becomes thinner and more prone to cracking, or micro-pits may form on the surface, trapping water and causing stains. Don't blindly trust DIY tutorials for daily maintenance - professional polishing machines are essential for depth control. Choose based on scratch severity: effective for shallow scratches, but skip deep ones to avoid wasting effort. Park in shaded areas to minimize sun exposure and prevent accelerated glass aging. Post-polishing care is crucial - regular cleaning maintains results by preventing dirt buildup, helping the effects last longer.

Was this review help?
12
3
Share
Expand All
More Forum Discussions

What causes the abnormal noise when the Besturn T77 starts moving?

The Besturn B70 makes abnormal noises when starting. If it's a hissing sound, there could be multiple issues such as problems with the caliper, brake disc, or brake pads. If the noise is continuous, the first thing to check is whether there's any dragging brake. Poor caliper resetting can cause prolonged friction between the disc and pad, leading to abnormal noises under certain conditions. Also, check if there are any foreign objects stuck between the pad and disc. Methods to avoid brake pad noise: Newly replaced brake pads also need a break-in period to better integrate with the old disc. Right after replacement, the brakes may feel very stiff, and it usually takes a few hundred kilometers of driving before they feel better. Noise during driving: While driving, very small sand particles might get between the pad and disc, sometimes causing abnormal noises due to friction. This situation generally does not require repair.
19
3
Share

What is the 0-100 km/h acceleration time for the BMW X7?

BMW X7 0-100 km/h acceleration time is 5.99 seconds. BMW X7 power and fuel consumption: The BMW X7 has a fuel consumption of 8.6L to 10.9L, equipped with a 3.0T inline six-cylinder twin-turbocharged engine, delivering a maximum horsepower of 340PS and a maximum torque of 450N·m. The transmission system is paired with an 8-speed automatic transmission and xDrive all-wheel-drive system, with a top speed of 245 km/h. BMW X7 specifications: The dimensions of this vehicle are 5163mm in length, 2000mm in width, and 1835mm in height, with a wheelbase of 3105mm. The drivetrain configuration is front-engine all-wheel drive, with an on-demand all-wheel-drive system. The central differential structure features a multi-plate clutch, and the power steering type is electric assist.
18
1
Share

How to Set Up One-Touch Window Control on Baojun 730?

To set up the one-touch window control on Baojun 730, follow these steps: 1. Start the vehicle; 2. Locate the one-touch window control button on the armrest; 3. Press and hold the button down for 5 seconds; 4. Pull and hold the button up for 5 seconds; 5. The one-touch window control setup is now complete. Taking the 2021 Baojun 730 as an example, it belongs to the MPV category with body dimensions of 4780mm in length, 1780mm in width, and 1740mm in height, featuring a wheelbase of 2750mm and a fuel tank capacity of 52 liters. The 2021 Baojun 730 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 147PS, a maximum power output of 108kW, and a peak torque of 250Nm, paired with a 6-speed manual transmission.
12
4
Share

What are the reasons for the Ford Focus turn signal not working?

The reasons for the Ford Focus turn signal not working are: 1. The turn signal does not work, but the hazard lights do, indicating damage to the turn signal switch; 2. If individual turn signals do not work, it is due to bulb failure; 3. If all turn signals do not work, it is caused by a blown turn signal fuse, resulting in all turn signals not functioning. Taking the 2021 Ford Focus as an example, its body structure is a 4-door, 5-seat sedan, with body dimensions of: length 4674mm, width 1810mm, height 1468mm, wheelbase 2705mm, fuel tank capacity 53 liters, trunk capacity 511 liters, and curb weight 1242kg.
17
4
Share

What are the emission standards for China VI vehicles?

The emission standards for China VI vehicles stipulate that the sulfur content should not exceed 50mg per kilogram, and the particulate matter (PM) should not exceed 3mg per kilometer. China VI refers to the standards established to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent and control pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. Methods to check if a vehicle meets China VI standards include: 1. Logging in to the Motor Vehicle Environmental Protection Website for inquiry; 2. Inquiring at the Vehicle Management Office; 3. Checking the vehicle's environmental protection label; 4. Reviewing the vehicle's factory certificate.
17
3
Share

How to distinguish between the 2016 and 2019 Tiida models?

Distinguishing between the 2016 and 2019 Tiida models can be done by checking the following features: the 2019 model has a front-and-back adjustable armrest and a car-connected infotainment screen. Both the 2016 and 2019 Tiida models feature a 5-door, 5-seat hatchback body structure, with identical dimensions of 4393mm in length, 1766mm in width, 1539mm in height, a wheelbase of 2860mm, a minimum ground clearance of 173mm, and a fuel tank capacity of 52 liters. Both models are equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 126PS, a maximum power of 93kW, a maximum torque of 154Nm, and are paired with a 5-speed manual transmission.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.