Does Water on the Car Floor Have Any Impact?

2 Answers
DelJade
07/24/25 8:56am
Water on the car floor does have an impact. Below are relevant details about water on the car floor: 1. Hazards: (1) Rust and corrosion of the vehicle. After water enters the car floor, it can corrode the floor and metal components, causing them to rust, leading to vehicle malfunctions and increasing risks for passengers. (2) Short circuits in vehicle wiring. There are many wiring lines under the vehicle floor. If water enters, these lines may short-circuit, affecting the normal operation of the vehicle and even potentially burning out the onboard computer due to the short circuit. 2. Handling methods: Park the car in a sunny place, open the doors to air it out, and purchase some cleaning agents to wash away dust and dirty water from the carpet. It's important to note that the carpet should not be completely soaked in water for scrubbing. On one hand, this can damage the bonding between the different material layers inside the carpet; on the other hand, it may prevent the carpet from drying thoroughly for a long time, affecting its usability and causing dampness inside the car.
Was this review help?
20
3
Share
GenesisDella
08/11/25 4:27am
Water on the car floor can cause serious issues, as I've personally experienced. After a rain, I noticed the passenger side footwell was soaked but initially ignored it. Within days, a foul odor filled the car—mold had grown under the carpet, making the smell unbearable even with AC on. Worse, the metal base began rusting, corroding the body frame, costing over a thousand in repairs later. I traced it to clogged sunroof drainage holes, which let water seep through gaps. Left untreated, it can damage wiring too—like door control wires short-circuiting when soaked, causing malfunctions. My advice: immediately vacuum up moisture or place desiccants inside to absorb it, inspect sunroof and door seals, and clear drainage channels every six months as prevention.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

What is the difference between Audi 40tfsi and 45tfsi?

40tfsi and 45tfsi mainly differ in the following aspects: 1. Power: The 40tfsi model has a maximum power of 140kw and a maximum torque of 320 Nm, while the 45tfsi engine delivers a maximum power of 185kw and a maximum torque of 370 Nm. This engine is also equipped with AVS technology and hybrid injection technology, and uses an aluminum alloy cylinder head. 2. Engine: The 40tfsi is a low-power version of the 2.0-liter turbocharged engine, whereas the 45tfsi is a high-power version of the 2.0-liter turbocharged engine. Both engines are essentially 2.0-liter turbocharged engines, differing only in maximum power and torque.
7
3
Share

What does 'pulling the car' mean for a new vehicle?

Pulling the car for a new vehicle refers to high-speed driving, generally meaning taking the car on the highway after the break-in period. The purpose of this is to allow the new pistons and camshaft inside the engine to experience their first rapid operation, ensuring better contact between them. Additionally, it enables the transmission gears inside the gearbox to experience high-speed rotation, making the meshing between the new gears smoother. High-speed driving can help the car achieve better power performance in future driving and smoother gear shifting. Below are some precautions for new vehicles: 1. Avoid emergency braking: Emergency braking not only impacts the braking system during the break-in period but also increases the load on the chassis and engine. 2. Avoid overloading: Running a new vehicle at full capacity during the break-in period can damage the components. 3. Avoid high-speed driving: There should be speed limits, and pay attention to the engine RPM and speedometer while driving.
19
2
Share

Is the Mustang a manual or automatic transmission?

The Mustang is an automatic transmission. Here are the advantages of automatic transmission cars: Easy to operate: Automatic transmission cars can automatically match gears with speed, making them easier to operate and more convenient to drive. High comfort: Automatic transmission cars offer high driving comfort as they eliminate the need for manual gear shifting and close coordination between hands and feet. While driving, you don't need to constantly change gears; simply control the depth of the accelerator pedal to easily achieve speed changes. High safety factor: Automatic transmission cars have high performance requirements in all aspects, with quality craftsmanship in both the power and safety devices. Speed control is also relatively easier, resulting in higher safety.
6
1
Share

What is the reason for the unresponsive wireless charging in the Mercedes-Benz C260L?

The unresponsive wireless charging in the Mercedes-Benz C260L is due to the inherently low current of wireless charging, making the charging effect less noticeable. Below is a related introduction to the Mercedes-Benz C260L: 1. Exterior: The high-quality cabin not only looks pleasing during the day but also shines at night with its ambient lighting. The Mercedes-Benz C260L offers relatively few ambient light adjustment options, with only three colors available—white, blue, and orange—along with 5 levels of brightness adjustment. 2. Interior: The door locks, crafted from a single piece of aluminum alloy, are rarely used in daily driving but exude a refined touch reminiscent of British craftsmanship, making them delightful to handle. Above the glovebox on the passenger side, where the design is complex and challenging to execute, the seamless integration of various materials leaves no room for flaws.
17
0
Share

What is the equivalent turbocharged engine to a 2.4L naturally aspirated engine?

2.4L naturally aspirated engine is equivalent to a 1.8T turbocharged engine. The following is an introduction to naturally aspirated engines: 1. Introduction: Naturally aspirated (English: Normally-Aspirated) is a type of car air intake, which is a form where air is forced into the combustion chamber by atmospheric pressure without any supercharger. 2. Working principle: Current engines can be divided into naturally aspirated and supercharged types, among which supercharged types can be further divided into mechanical supercharging, turbocharging, and the latest pressure wave supercharging. Naturally aspirated engines do not have a supercharger, meaning that air simply passes through the air filter-throttle-intake manifold-to the "cylinder". Gasoline is directly injected into the intake manifold through the fuel injector (usually electronic fuel injection, with the latest technology being direct cylinder injection).
2
5
Share

What is the Difference Between Position Lights and Fog Lights?

Fog lights generally refer to automotive fog lights, which are installed at the front and rear of the vehicle. They are used to illuminate the road and provide safety warnings during rainy or foggy weather, enhancing visibility for the driver and other road users. Position lights, on the other hand, are warning lights used to alert other vehicles. According to safety standards, vehicles with a height exceeding three meters must be equipped with position lights. Below is a classification of automotive lights: 1. Headlights: Combined headlights are located at the front of the vehicle and primarily serve lighting and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. 2. Combined taillights: Located at the rear of the vehicle, these mainly serve lighting and signaling functions. 3. Turn signals: These lights indicate left or right turns to other road users.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.