Does Water in the Trunk Count as a Flood-Damaged Car?

1 Answers
IslaFitz
07/28/25 9:25pm
Water in the trunk does not count as a flood-damaged car. Below is relevant information about flood-damaged cars: 1. Flood-Damaged Car: A flood-damaged car refers to a vehicle that has been submerged in water, typically meaning the wiring has been soaked, with the water depth exceeding one-third of the wheel height, and the bottom components of the vehicle body have been in prolonged contact with water. Commonly referred to as water-damaged cars, they can be categorized into three levels based on the extent of water immersion: (1) If the water level exceeds the car's chassis, it is called a water-immersed car; (2) If the water level exceeds the oil dipstick, it can be termed a semi-flooded car; (3) If the water level has surpassed the engine hood or the dashboard surface, it is then called a fully flooded car. 2. Identifying Flood-Damaged Cars: Flood-damaged cars often have sand and gravel that cannot be completely cleaned, remaining in gears or belts, which can lead to certain components being prone to damage and may initially produce unusual noises. Generally, repairing a water-damaged vehicle involves first removing the seats, interior trim, and panels to drain the water and clean the mud. The engine must also be dismantled to inspect electronic components, especially checking whether the computer motherboard is damaged.
Was this review help?
17
3
Share
More Forum Discussions

What are China III and China IV Vehicles?

China III and China IV vehicles are motor vehicles that comply with China's automotive emission standards. The following are the key differences between China III and China IV: 1. China III refers to the third stage of China's automotive emission standards, which introduced upgrades and modifications to engines and exhaust systems to reduce pollutant emissions, including enhancements to vehicle self-diagnostic systems. 2. China IV represents the fourth stage of China's automotive emission standards, featuring further upgrades to the post-emission treatment systems compared to China III, with pollutant emission standards reduced by 50% to 60% relative to China III. 3. To stably meet the China III emission standards, vehicles must be equipped with technical measures that ensure pollutant emissions comply with China III standards, along with the use of fuel that meets Euro III standards.
9
2
Share

Can LNG be added to CNG?

In principle, it is possible to add, but if a car chooses either LNG or CNG as fuel, the corresponding system will be installed. If you want to change the type of fuel for the car, it is best to first replace the corresponding gas injection system kit, because the kits required for installation on the car are different for each. The following is an introduction to the relevant knowledge about LNG and CNG: 1. Definition: Both LNG and CNG vehicles use natural gas as fuel and belong to clean energy vehicles. 2. Composition: The main component of the fuel is methane, and the two are very similar in terms of physical and chemical properties, fuel economy, and calorific value; the exhaust emissions basically do not contain sulfides or particulate matter.
3
3
Share

How to Deactivate a Car Anti-Theft Device?

The methods to deactivate a car anti-theft device are as follows: 1. Remove the alarm fuse. Locate the car's fuse box, identify the alarm fuse, and then use professional tools to remove it. 2. Unlock the car with the key. Use the key to open the driver or passenger door, then wait for a few minutes; most alarms will automatically stop. 3. Turn off the alarm directly. Open the car engine hood, locate the alarm according to the car's operation manual, and then follow the instructions to deactivate it. The car anti-theft device is a high-tech security product that integrates GSM network digital mobile communication technology and GPS satellite positioning technology. In addition to its anti-theft functions, it also features mobile phone control, SMS positioning, remote monitoring, remote alarm, and full voice prompt operation.
10
4
Share

What Causes Steering Wheel Stiffness at High Speeds?

High-speed steering wheel stiffness may result from the following causes: 1. Input sensor failure, such as a malfunctioning optical grating angle measurement sensor, preventing the ECU from properly obtaining user control parameters. 2. ECU malfunction: Computational errors in the ECU itself may lead to vehicle control actions that contradict the driver's intentions. 3. Improper driving: Prolonged driving with an unbalanced vehicle body may cause deviations in the yaw angle sensor position. 4. Solutions: Minor steering wheel stiffness can sometimes be resolved by adjusting the steering wheel up and down before returning it to its original position. Alternatively, turning the steering wheel lock-to-lock several times while stationary may eliminate the stiffness. If these methods prove ineffective, it is advisable to promptly visit an authorized dealership for inspection and resolution.
8
5
Share

What are the requirements for obtaining an A1 driver's license?

To obtain an A1 driver's license, applicants must meet certain conditions regarding age, height, vision, and color recognition. The specific requirements are as follows: 1. Age: Applicants must be between 26 and 50 years old. 2. Physical conditions: For large buses, the minimum height requirement is 155 cm; for medium-sized buses, the minimum height requirement is 150 cm. 3. Vision: For large buses, the naked or corrected vision of both eyes must reach at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, the naked or corrected vision of both eyes must reach at least 4.9 on the logarithmic visual acuity chart. 4. Color recognition: Applicants must not have red-green color blindness.
12
4
Share

Differences Between Magotan 280, 330, and 380

Differences between Magotan 280 and 330 are as follows: 1. Interior Differences: The 280 features a standard central control screen, while the 330 comes with a 6.5-inch embedded central control screen and a full LCD instrument panel, offering more refined information display and a stronger sense of technology. 2. Power Differences: The 280 is equipped with an EA211 1.4T turbocharged inline 4-cylinder engine, delivering a maximum horsepower of 150 HP, maximum power of 110 kW, and maximum torque of 250 N·m. The 330 is powered by a third-generation EA888 2.0T turbocharged inline 4-cylinder engine, boasting a maximum horsepower of 186 HP, maximum power of 137 kW, and maximum torque of 320 N·m.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.