Does Washing Cars in Summer Have a Significant Impact on Car Paint?

How to Use the Windshield Washer Switch?

Usage of the windshield washer switch: Simply pull the wiper control lever towards the driver. Some models use a physical button, usually located on the outermost part of the wiper control lever, which can be pressed to activate. More related information is as follows: 1. Car Wiper: Composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly, its main function is to remove rain, snow, and dust that obstruct the view on the windshield. 2. Wiper Maintenance Methods: 1. Spray windshield washer fluid: When using the wiper to remove dust from the windshield on sunny days, always spray windshield washer fluid; do not dry wipe. 2. Manual cleaning: For stubborn or hard debris on the glass, clean manually. 3. Hold the "backbone" of the wiper blade: When lifting the wiper blade during car washing or daily cleaning, hold the "backbone" of the wiper blade and gently return it when done. 4. In winter, use an ice scraper to remove ice from the windshield surface first.

9

3

Share

Where is the coolant drain hole of the Boyue?

Boyue's coolant drain hole is located at the lower part of the car's radiator. How to replace the coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a special focus on the five-way water pipe. The five-way pipe is named for its five connections to different parts of the car, and the coolant flows through it before being distributed to various parts of the vehicle to function. If there's any leakage of coolant in this section, replace the water pipe or re-secure the connections as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continue to pour water into the reservoir to allow it to continuously flow through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out from the reservoir will be slightly pinkish. Continue adding clean water until clear water flows out. Remember to disconnect the heater hose and drain the water from the heater core. About an hour after draining, add the new coolant through the radiator's hose—this allows the coolant to flow quickly into the radiator. Then, add another bottle of coolant to the reservoir until it's nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the cooling system. Top up the coolant to the "MAXT" mark on the reservoir.

15

3

Share

How Does an Automotive Alternator Work?

Automotive alternator works by connecting and assembling the stator and rotor of the generator through bearings and end covers, allowing the rotor to rotate within the stator, cutting the magnetic lines of force, thereby generating an induced electromotive force. This potential is then drawn out through the terminals and connected to the circuit, producing an electric current. More related details are as follows: 1. Composition of Stator and Rotor: The alternator utilizes the electromagnetic induction principle, where conductors cutting magnetic lines of force induce an electromotive force, converting the mechanical energy of the prime mover into electrical energy output. A synchronous generator consists of two parts: the stator and the rotor. The stator is the armature that generates electricity, and the rotor is the magnetic pole. The stator is composed of armature core, uniformly arranged three-phase windings, frame, and end covers. The rotor is usually of the non-salient pole type, consisting of excitation windings, core, shaft, retaining ring, and center ring. 2. The Automotive Alternator as the Main Power Source: Driven by the engine, it supplies power to all electrical devices except the starter during normal operation. If there is excess energy, it then charges the battery. When the alternator is running, the spark test method should not be used to check for power generation, as it can easily damage diodes and other electronic components.

10

2

Share

How much fuel is consumed by idling with the air conditioning on for one hour?

Idling with the air conditioning on consumes approximately 1.4-2.5 liters of fuel depending on the engine displacement, with an average of around 1.6 liters. While the fuel consumption is not excessive, it is detrimental to the engine, as it can lead to carbon buildup and overheating damage to the catalytic converter. Additional details are as follows: 1. Idling: This refers to the engine running without any load, only overcoming the internal friction of its components, without delivering power externally. The minimum stable speed at which the engine operates under these conditions is called idle speed, one of the five fundamental operating states of an engine. Adjusting idle speed should avoid sudden increases or decreases in RPM, as this can cause premature wear on the engine. 2. During engine idling: The engine not only powers the air conditioning but also maintains the normal operation of the power steering and brake booster pumps, though these functions are unnecessary when the vehicle is stationary. The sole reason for idling while parked is to keep the air conditioning running and ensure comfort inside the vehicle. In fact, idling offers no benefits to the vehicle. Prolonged operation at low RPM can lead to carbon buildup, which over time may cause unstable idling and affect the engine's power performance, as well as its lifespan. Moreover, when idling while parked, due to lower air flow, the combustion efficiency at low RPM is not high, resulting in significantly higher emissions compared to normal driving conditions.

16

4

Share

Can You Clean the Car Condenser by Yourself?

You can rinse it directly. The air conditioner condenser is a device that exchanges heat between the external air and the substances inside the pipes through heat-dissipating metal fins. Keeping the surface of the car condenser clean facilitates the dissipation of heat to the outside. Regularly cleaning the condenser surface can significantly improve the cooling efficiency of the air conditioning system. More details are as follows: 1. Condenser: It is usually installed at the front of the car along with the radiator to utilize the airflow during driving to enhance heat dissipation. When washing the car, it is best to use a high-pressure water gun to rinse the condenser and radiator to prevent the heat-dissipating fins from being clogged by debris (insects, leaves, etc.), which could affect the cooling efficiency. 2. Function of the condenser: The air removes the superheated part of the high-temperature refrigerant gas sent by the compressor, turning it into dry saturated vapor; it liquefies at a constant saturation temperature; when the air temperature is lower than the condensation temperature, it further cools the liquefied refrigerant to the same temperature as the surrounding air, serving a cooling function.

9

3

Share

What is the emission standard for cars in 2009?

2009 car emission standards are as follows: Cars manufactured before September 2009 comply with China III emission standards, while those produced after September 2009 meet China IV emission standards. Automobile emission standards refer to regulations on the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and carbon smoke emitted from vehicle exhaust. Methods to check a car's emission standard: 1. Check the back of the car's environmental protection compliance label to find the emission standard. 2. The vehicle certification document's first page contains an emission standard description, though not directly stated as 'China X' but as a string of characters. 3. The car's production year can be used to roughly estimate its emission standard. 4. Take the vehicle registration certificate to the local DMV for inquiry.

20

3

Share

Does Washing Cars in Summer Have a Significant Impact on Car Paint?

How to Use the Windshield Washer Switch?

Where is the coolant drain hole of the Boyue?

How Does an Automotive Alternator Work?

How much fuel is consumed by idling with the air conditioning on for one hour?

Can You Clean the Car Condenser by Yourself?

What is the emission standard for cars in 2009?

What Causes the High Temperature in the Epica?

How to Troubleshoot BMW Rain Sensor Malfunction?

What are the symptoms of a faulty water pump in a BMW X6?

What is the reason why the leg rest of the Mercedes-Benz driver's seat cannot be fully raised?