Does Using 92 Octane Gasoline Affect the Buick GL8?

1 Answers
OFrank
07/29/25 6:24pm
According to the official vehicle manual recommendation, the Buick GL8 should use 95 octane gasoline. In addition to checking the suitable gasoline grade in the vehicle manual, the Buick GL8's recommended fuel type can also be found on the fuel tank cap, which will be clearly marked. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. However, with the application of new technologies, the gasoline grade cannot be solely determined by the compression ratio. High compression ratio engines can also be tuned to use lower octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane number, the higher the octane value and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Buick GL8 occasionally uses the wrong gasoline grade, simply switching back to the correct grade after consumption is sufficient. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, using higher octane gasoline will not cause damage. However, the increase in octane value will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. This is because the significantly lower octane value reduces the gasoline's ignition point, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it may only increase noise without obvious engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
Was this review help?
14
0
Share
More Forum Discussions

What Should Be Noted During the Break-in Period of a New Car?

Precautions during the break-in period of a new car include: 1. Ignite the engine only after the oil light and preheating light have turned off, and turn off the audio, air conditioning, and lights before shutting down the engine; 2. Reduce the frequency of long-distance driving during the break-in period to avoid prolonged engine operation; 3. Keep the engine speed below 4,000 RPM during the break-in period; 4. After a cold start, warm up the car for 3 minutes until the water temperature gauge needle begins to rise close to the normal level before driving; 5. Avoid aggressive driving and flooring the accelerator, refrain from using sudden braking to prevent impact on the braking system and increased shock load on the vehicle's chassis and engine; 6. Ensure the quality of the fuel added; 7. Avoid driving at full load.
17
4
Share

What is the difference between FAW Mazda and Changan Mazda?

FAW Mazda and Changan Mazda differ in their parent companies. FAW Mazda: This automobile sales company was established on March 1, 2005, and is a joint venture between China FAW Group Corporation, FAW Car Co., Ltd., and Mazda Motor Corporation of Japan. Changan Mazda: Changan Mazda Automobile Co., Ltd. was formerly known as Changan Ford Mazda Automobile Co., Ltd. Nanjing Branch. It was established on April 19, 2005, and began production on April 9, 2007. It is Mazda's only overseas enterprise that integrates production, procurement, R&D, and sales into one complete vehicle manufacturing operation.
5
5
Share

What is the function of an air compressor?

Functions of an air compressor: 1. Compressing gas as a power source and for controlling instruments and automation devices; 2. Compressing gas for refrigeration and gas separation, where the gas is liquefied through compression, cooling, and expansion for artificial refrigeration; 3. Compressing gas for synthesis and polymerization in the chemical industry, where certain gases are pressurized by the compressor to facilitate synthesis and polymerization; 4. For pipeline transportation and bottling of gases. The air compressor is the main component of the air source device, converting the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy, serving as the pressure generating device for compressed air.
20
3
Share

What are the exterior dimensions of the Honda Avancier?

The exterior dimensions of the Honda Avancier are: length 4858mm, width 1942mm, height 1670mm, with a wheelbase of 2820mm, a trunk capacity of 510l, and a curb weight of 1708kg. The body structure is a 5-door, 5-seat SUV. The Honda Avancier is equipped with a 1.5T turbocharged engine, delivering a maximum power of 142 kilowatts at 5600 rpm, and a maximum torque of 243 Newton-meters between 2000 to 5000 rpm. It is paired with a CVT continuously variable transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.
16
3
Share

What model of spark plug should be replaced for the Teana?

The Teana should be replaced with NGK platinum spark plugs. The replacement method is as follows: 1. Open the engine guard plate when the car is cold; 2. Remove the fixing screws of the ignition coil; 3. Use a wrench to take out the spark plug; 4. Apply silicone grease to the ceramic part of the new spark plug; 5. Place the spark plug in the sleeve and install it properly. The Teana is a mid-size car with a body size of 4901mm in length, 1850mm in width, and 1450mm in height, a wheelbase of 2825mm, and a fuel tank capacity of 61.3 liters. It is equipped with a 2.0L naturally aspirated engine with a maximum power of 115kW.
3
3
Share

Are Motorcycles Issued Yellow License Plates?

Motorcycles can have either yellow or blue license plates. In terms of engine displacement: Motorcycles with an engine displacement above 50CC are issued yellow plates, while mopeds with a displacement of 50CC or below receive blue plates (the most common motorcycle displacements are 125cc or 150cc). Regarding driver's license requirements: Yellow-plated motorcycles require a driver's license, specifically an E-class license. Blue-plated two-wheeled motorcycles are classified as mopeds and require an F-class license. Concerning passenger capacity: Yellow-plated motorcycles can legally carry a maximum of two people including the rider. Blue-plated motorcycles are restricted to only one person, meaning they cannot carry any passengers.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.