Does Uneven Tire Pressure Affect the Car?

1 Answers
LaKyle
07/29/25 7:14pm
Inconsistent tire pressure values can lead to reduced braking effectiveness, difficulty or heaviness in steering, and increased fuel consumption. Below are detailed guidelines for adjusting car tire pressure: 1. Rough Roads: On roads with significant bumps, it's advisable to slightly reduce the tire pressure by 0.1-0.2bar below the standard tire pressure. For long-distance high-speed driving, tire pressure should not be too low; instead, it's better to increase it by about 0.2bar above the standard tire pressure's lower limit. 2. New vs. Old Tires: For new tires, the pressure can be increased by about 0.2bar above the standard. For old tires, it's appropriate to slightly decrease the pressure according to the standard; if the tires are severely worn, use the lower limit of the standard tire pressure. 3. Summer vs. Winter: In winter, it's recommended to increase the tire pressure by about 0.2bar above the standard. In summer, use the lower limit of the standard tire pressure. For cars parked outdoors in summer, the pressure can generally be about 0.1bar below the standard to prevent tire blowouts due to high temperatures.
Was this review help?
7
5
Share
More Forum Discussions

How to Use a Piston Ring Pliers?

Piston ring pliers are a specialized tool designed for installing and removing piston rings. When using piston ring pliers, the ring clamp on the pliers should grip the opening of the piston ring. Hold the handles and apply even pressure gradually, allowing the pliers to slowly contract while the ring clamp gently expands the piston ring. This enables the piston ring to be either removed from or installed into the piston ring groove. It is essential to apply uniform force when using piston ring pliers to avoid breaking or damaging the piston ring due to excessive force, as well as to prevent hand injuries. The steps for removing piston rings are as follows: 1. Remove one piston and clean it thoroughly with a cloth. 2. Use the piston ring pliers to remove the two compression rings: Ensure the claw part of the pliers faces upward, and apply even pressure when using them. 3. Remove the first compression ring first. 4. Then remove the second compression ring. 5. Pay attention to the direction of the rings during removal; if there are no markings, make a note. 6. Remove the oil ring: The oil ring can be removed manually by first taking off the upper scraper ring, followed by the lower scraper ring, and finally removing the oil ring expander. 7. Arrange the oil rings in order. 8. Use needle-nose pliers to remove the piston pin circlip. 9. Use a specialized tool to remove the piston pin and take it out by hand. 10. After disassembly, use a scraper to clean carbon deposits from the piston.
1
4
Share

What is the difference between the Nissan Patrol XE and SE?

The differences between the Nissan Patrol XE and SE are: 1. Different headlights: The XE is equipped with halogen headlights and lacks LED daytime running lights; the SE features xenon headlights and LED daytime running lights. 2. Different cleaning devices: The XE does not have headlight cleaning devices; the SE includes headlight cleaning devices. The XE has black mirrors without turn signals, while the SE comes with body-colored mirrors and turn signals. The XE only has a parking radar button, whereas the SE is equipped with a parking radar switch button, trunk opening button, and headlight height adjustment button. The Nissan Patrol is a luxury off-road SUV series launched by Nissan, primarily featuring off-road vehicle configurations.
3
3
Share

What is the difference between the Nissan Patrol Y61 and Y62?

The difference between the Nissan Patrol Y61 and Y62 lies in their model generations: the Y61 is the fifth generation of the Patrol series, while the Y62 is the sixth generation. The Nissan Patrol is a vehicle series launched by Japanese automaker Nissan, primarily featuring off-road configurations. The Patrol Y61 is a large off-road vehicle equipped with solid front and rear axles. Its exterior design adopts straight lines, giving the entire body a relatively flat appearance. In contrast, the Y62 model features a more rounded and stylish exterior design compared to its predecessor. The Y61 has a rear-mounted spare tire with a split tailgate design, whereas the Patrol Y62 utilizes an underbody-mounted spare tire.
19
3
Share

What is the purpose of the automatic transmission P gear?

Automatic transmission P gear – Parking gear, also known as the starting gear. When the vehicle is parked and not in use, the gear is set to this position, at which point the wheels are mechanically locked to prevent rolling. More information about the automatic transmission P gear is as follows: 1. An automatic transmission uses planetary gear mechanisms to shift gears, automatically adjusting based on the degree of throttle pedal pressure and changes in vehicle speed. The driver only needs to operate the accelerator pedal to control the speed. The P gear in an automatic transmission vehicle can serve as a substitute for the handbrake, so when parking, engaging the P gear eliminates the need to pull the handbrake, even when parked on a slope. However, in reality, the P gear can indeed act as an auxiliary to the handbrake but cannot replace it. When parking an automatic transmission vehicle, the handbrake should still be used. 2. P (Parking): Used for parking, it employs a mechanical device to lock the rotating parts of the vehicle, preventing movement. When the vehicle needs to remain stationary for an extended period or before leaving the vehicle after parking, the handbrake should be engaged, and the gear lever should be pushed into the "P" position. It is important to note: the vehicle must be completely stopped before using the P gear; otherwise, the mechanical parts of the automatic transmission may be damaged. Additionally, automatic transmission vehicles are equipped with a neutral start switch, ensuring the engine can only be started in the "P" or "N" gear to prevent the vehicle from suddenly lurching forward if started in another gear by mistake.
5
5
Share

What to Do When the Car Window Won't Go Up?

You can initialize the window lift switch. The initialization method is as follows: First, turn on the ignition switch, hold the lift switch up until the window reaches the top and continue holding for more than 3 seconds. Then, release the switch and immediately press it down to lower the window to the bottom and hold for more than 3 seconds. Finally, hold the switch up again until the window reaches the top and continue holding for more than 3 seconds to complete the initialization. Here is more information about window lift mechanisms: 1. The window regulator is the lifting device for car door and window glass, mainly divided into electric window regulators and manual window regulators. Nowadays, many car door and window glasses are generally operated by button-type electric lifting mechanisms, using electric window regulators. 2. Electric window regulators for cars are mostly composed of a motor, reducer, guide rope, guide plate, and glass mounting bracket. The master switch is controlled by the driver to open and close all door and window glasses, while the individual switches on each door handle are controlled by passengers to operate their respective window glasses, making the operation very convenient. 3. Improper operation of the lift switch in daily use can also cause issues with the regulator. The correct way to use the lift switch is: when lifting, pull the switch all the way up, and when lowering, press it all the way down. Avoid operating the switch bit by bit, as this can cause the contacts to instantaneously bear a strong current, leading to switch burnout.
14
4
Share

What is the tire size of the Tiguan sedan?

The tire size of the Tiguan sedan is 235/55R18 and 235/50R19. As this vehicle is positioned as a midsize SUV, it uses relatively larger tires. Compared with the previous generation, the new Tiguan has increased dimensions: the body length is extended by 206mm, the width by 30mm, and the wheelbase by 107mm, resulting in more spacious interior. In terms of powertrain, the Volkswagen Tiguan is equipped with 1.4T and 2.0T engines. The 1.4T engine delivers maximum power of 110kW and peak torque of 250Nm, while the low-power 2.0T version produces 137kW and 320Nm respectively.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.