Does Turning on the Air Conditioning Affect the Fuel Consumption of the Tayron?

1 Answers
StLucia
07/30/25 4:28am
Turning on the air conditioning in a car does affect fuel consumption. As the engine load increases, the lower the cooling temperature or the higher the heating temperature, the more the fuel consumption will rise. The Tayron has a combined fuel consumption of 6.7-7.5L/100km. Currently, there are 5 models of the Tayron available for sale. The Tian Luxury Intelligent Connect version has a combined fuel consumption of 6.7L/100km. The Luxury Intelligent Connect Plus and Luxury Intelligent Connect versions have a combined fuel consumption of 6.8L/100km. The R-Line Intelligent Connect and Luxury Intelligent Connect Pro versions have a combined fuel consumption of 7.5L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 7.0-12.0L/100km. Reasons for high car fuel consumption: Abnormal tire pressure or switching to larger tires: Underinflated tires affect fuel consumption. When tire pressure is too low, the contact area between the tire and the ground increases, leading to greater driving resistance, which naturally results in higher fuel consumption. Long idling without turning off the engine or frequent ignition: When waiting for a long time without needing to move the vehicle, it is recommended to turn off the engine. Every time the engine starts, the computer-controlled fuel injection volume is higher, so frequent engine starts within a short period will definitely increase fuel consumption. Aggressive acceleration and frequent braking while driving: Unless necessary, avoid frequent overtaking while driving. Maintaining a steady speed helps reduce fuel consumption. Additionally, maintaining a proper following distance and minimizing unnecessary braking actions can also save fuel. Driving at low gear with high speed or high gear with low speed: This situation is more common among new drivers. Often, the vehicle's speed is already high, but the gear has not been shifted up accordingly, leading to higher engine RPM and naturally higher fuel consumption. Another scenario is driving at a very low speed while staying in a high gear, which is characterized by engine and body shaking and the risk of stalling. Fully open windows in summer or using air conditioning in traffic jams: Using air conditioning in summer increases engine load, leading to higher fuel consumption. Not planning the route properly, driving on congested roads, or frequently changing lanes: It is advisable to plan the route in advance, check local traffic information, and avoid congested roads.
Was this review help?
13
4
Share
More Forum Discussions

What steering gear is used in sedans?

There are three types of steering gears used in automobiles: rack and pinion, worm and roller, and recirculating ball. The automobile steering gear can amplify the force transmitted from the steering wheel to the steering linkage and change the direction of force transmission. Rack and Pinion Steering Gear: It is the most common type of steering gear. Its basic structure consists of a pair of meshing pinion and rack. When the steering shaft drives the pinion to rotate, the rack moves in a straight line. Sometimes, the rack directly drives the tie rod to steer the wheels. Recirculating Ball Steering Gear: The recirculating ball power steering system mainly consists of two parts: mechanical and hydraulic. The advantages of this steering gear are easy operation, low wear, and long service life. Worm and Roller Steering Gear: This steering gear uses a worm as the driving part and a roller as the driven part. The worm has a trapezoidal thread, and the finger-like tapered pin is supported by bearings on the roller. The roller and the steering rocker arm shaft are integrated. During steering, the worm is rotated by the steering wheel, and the tapered pin embedded in the worm's spiral groove rotates on its own while moving in an arc around the steering rocker arm shaft, driving the roller and the steering pitman arm to swing, which then turns the wheels through the steering linkage.
7
2
Share

What Material Are Vibration Damping Pads Made Of?

Vibration damping pads are made of rubber. Below is relevant information about vibration damping pads: 1. Function: When a car engine operates, vibrations are generated due to the reciprocating motion of pistons, cylinder combustion, and moving parts. If the engine is directly connected to the chassis, the chassis will also vibrate, affecting the car's handling and comfort. Therefore, a vibration damping pad is installed between the car engine and the chassis to minimize the transmission of engine vibrations to the chassis. The working principle involves using the elastic deformation of the damping pad to absorb the vibrations produced by the engine. 2. Characteristics: Rubber vibration damping pads are characterized by both high elasticity and high viscosity. The elasticity of rubber is generated by changes in the coiled molecular conformation, while interactions between rubber molecules hinder the movement of molecular chains, exhibiting viscous damping characteristics. As a result, stress and strain are often in an unbalanced state.
18
3
Share

What does the R gear on the air conditioning of the old GL8 mean?

When switched to the R gear, the rear air conditioning fan speed is controlled by the rear switch. The following is the relevant content introduction: 1. Body dimensions: The GL8's body dimensions are 5256mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm. As a large MPV, the Buick GL8 has a significant advantage in size. 2. Configuration: In terms of configuration, the base model includes the most basic safety features, as well as front and rear parking sensors, cruise control, hill start assist, and other functions, but some details still need improvement. The mid-range model has seen significant improvements in configuration.
20
5
Share

Is the Audi A4L a manual or automatic transmission?

The Audi A4L is an automatic transmission. Here is an introduction to the gears of an automatic transmission car: 1. All gears: The gears of an automatic transmission include P, R, N, D, 2 or S, L or 1. 2. Parking gear: P stands for parking gear, also known as the parking position. 3. Other gears: R stands for reverse, N for neutral, and D for drive, also known as the driving gear. 4. Sport mode: S or 2 represents sport mode. 5. Low gear: L or 1 stands for low gear, also known as first gear. Here is some additional information explaining the meaning of the automatic transmission letters: 1. D - Drive: This is the most commonly used gear. 2. P - Park: This gear is used when parking. 3. N - Neutral: This gear is rarely used, typically when waiting at traffic lights. 4. R - Reverse: The car is equipped with a rearview camera, and when R gear is engaged, the image will appear on the central control screen, etc.
3
3
Share

Can the rear windows of the Audi A5 not roll down completely?

The rear windows of the four-door version of the Audi A5 cannot roll down completely. Here is an introduction to related content about Audi cars: 1. Models under the brand: Audi A3, Audi A5, Audi A6L, Audi Q3, Audi S4, etc. 2. Introduction to the Audi A6L: The front suspension is a five-link independent suspension, the rear suspension is a five-link independent suspension, equipped with a 2.0T turbocharged engine, with a maximum horsepower of 190PS, a maximum power of 140kW, a maximum torque of 320Nm, and paired with a 7-speed dual-clutch transmission. Below is extended information about the differences between Volkswagen and Audi: 1. In terms of nature: Volkswagen is a car manufacturing company headquartered in Wolfsburg, Germany, and is also the core enterprise of the Volkswagen Group, one of the world's four largest car manufacturers; Audi is a luxury car brand under Audi AG, a subsidiary of the Volkswagen Group. 2. In terms of logos: The VW in the Volkswagen logo is the first letter of its full name. The logo consists of three 'V's made with the middle and index fingers, symbolizing the company and its products' determination to win - win - win; Audi's logo is four interlocking rings, representing the four companies before the merger. 3. In terms of headquarters location: Volkswagen's headquarters is in Wolfsburg, Germany; Audi's headquarters is in Ingolstadt, Germany.
3
0
Share

Where is the charging port of the Leiling?

The car charger of the Leiling is located in the armrest box. Here is the relevant content introduction: 1. Charging: If you are using your phone for navigation, you can charge it by connecting the cable. The passenger can also charge their phone. If you are using your phone for navigation, you can insert a one-to-two splitter into the USB port on the left side of the passenger seat. 2. Model Introduction: The Leiling is built based on the American version of Toyota's A-class car model. The American version of the model, with its sharp appearance and excellent quality, has been a best-seller in North America for many years, with sales consistently ranking first in the A-class car market. The Leiling inherits the champion genes of this model and has a very high-quality foundation. The all-new Leiling comes in two powertrain versions. The fuel version is equipped with a 1.2T-D-4T direct-injection turbocharged engine, which can output a maximum torque of 185 Nm at 1500 rpm, paired with an S-CVT continuously variable transmission that can simulate 10 speeds.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.