Does Touching the Line in Subject 2 Result in Failure?

2 Answers
SanRobert
07/25/25 2:24pm
Touching the line means the vehicle body crosses the line. In the Subject 2 driving test, if the vehicle body crosses the line, 100 points will be deducted, resulting in a failed test. In addition to the vehicle body crossing the line, other actions that result in a 100-point deduction include failing to properly park in reverse, stopping midway, not following the prescribed route or sequence, and exceeding the allotted time. The Subject 2 test is scored out of 100 points, with criteria for failure, 20-point deductions, 10-point deductions, and 5-point deductions. The test is considered passed under the following conditions: ① For applicants of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. If a candidate fails the Subject 2 test, they are allowed one immediate re-test. If they choose not to take the re-test or fail it again, the test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving test permit, candidates are allowed a maximum of five attempts to schedule the Subject 2 and Subject 3 road driving tests. If the fifth attempt is still unsuccessful, all previously passed test subjects will be invalidated.
Was this review help?
3
3
Share
MacMatteo
08/11/25 9:04pm
In the Subject 2 driving test, crossing the line will definitely result in a fail—I know this very well because I've coached many students through it. 'Crossing the line' means the vehicle body touches or runs over the boundary line, whether during reverse parking or parallel parking. The examiner will immediately fail you if they see this, as it proves you haven't mastered the vehicle's positioning. Students often make this mistake when nervous, like not paying attention to whether the lines align properly in the rearview mirror while reversing. My advice is to practice more to familiarize yourself with the vehicle's dimensions, adjust the seat and mirrors properly, and avoid rushing. Retaking the test is troublesome and costly, so make sure you're well-prepared before attempting it—safety comes first. Think about it: the test rules aren't designed to be unfair but to instill good habits and prevent accidents on the road.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

How to Open the Panoramic Sunroof in the Breeze?

The sunroof switch is located at the front roof reading light position of the car. Push the button with the sunroof pattern near the driver's side to the "open" side to open the panoramic sunroof. Here is some information about car sunroofs: 1. Car sunroofs are installed on the roof and can effectively circulate air inside the car, increasing the intake of fresh air. 2. Car sunroofs can be divided into: sliding-out type, panoramic type, and curtain type, etc. They are mainly installed on commercial SUVs, sedans, and other models. 3. Panoramic sunroofs are actually relative to ordinary sunroofs. Generally speaking, panoramic sunroofs have a larger area, even a whole glass roof, allowing passengers to have an unobstructed view of the scenery above while sitting in the car.
17
4
Share

How to adjust the rearview mirror on the Tayron?

Tayron rearview mirror adjustment method is as follows: 1. The rearview mirror adjustment for the Volkswagen Tayron is located on the door armrest. Before adjusting the left and right rearview mirrors, you need to rotate the knob to align with the left or right rearview mirror button, after which you can adjust the mirror up, down, left, or right. Aligning the knob to the left adjusts the left mirror; aligning it to the right adjusts the right mirror. When no adjustment is needed, it is recommended to rotate the knob to the "0" or neutral position to effectively prevent accidental changes to other settings. 2. To retract the rearview mirrors, simply rotate the knob to the rearview mirror folding icon as shown in the diagram. It is important to remind owners that some models allow manual setting for the automatic retraction of rearview mirrors upon locking the vehicle.
18
1
Share

How often should the brake fluid be changed in a Toyota Corolla?

Toyota Corolla requires brake fluid replacement every 40,000 kilometers, using the Toyota genuine HZY3 series. The replacement method is as follows: 1. First, prepare an oil extraction container for the brake fluid; 2. Extract the brake fluid from the brake fluid reservoir in the engine compartment, which takes about ten seconds to complete; 3. Then use the extraction container to remove the fluid and air from the brake fluid lines; 4. Connect the hose of the extraction container to the bleeder valve of the wheel cylinder, then start extracting the old brake fluid and inject the new brake fluid. The Toyota Corolla is a compact car under the Toyota brand, with body dimensions of 4635 mm in length, 1780 mm in width, and 1455 mm in height, and a wheelbase of 2700 mm.
3
0
Share

What to Do When a Card Falls into the Car Door?

When a card falls into the car door, you can: 1. Use a wire to hook out the card that fell under the door; 2. Remove the door panel to retrieve the card. The car door provides a passage for the driver and passengers to enter and exit the vehicle, isolates external interference, and to some extent reduces side impacts to protect the occupants. Car doors can be classified by their opening methods into: 1. Front-hinged doors; 2. Rear-hinged doors; 3. Sliding doors; 4. Upward-swinging doors; 5. Folding doors; 6. One-piece doors; 7. Split doors. The design requirements for car doors include: 1. The maximum opening angle should be controlled between 65 to 70 degrees; 2. There should be no positional interference with other parts during the opening process.
17
0
Share

Where is the Q5 battery located?

Audi Q5 battery is located behind the spare tire near the door with a protective cover. Lift the cover to remove it and you will see the Audi Q5 battery. The steps to replace the battery are as follows: 1. Remove the sound insulation cover and spare tire. 2. Take out the tools and jack. After removing the jack, you can see a fixing screw. Use a 13mm socket to remove it as this is the only screw securing the entire assembly. 3. Use a 10mm socket to loosen the electrodes. 4. Remove the battery and you will see the battery is secured with a front slot and a rear screw-fixed retainer. 5. First secure the battery, then fix the electrodes. Install the cover plate on the four round holes of the battery and reinstall the spare tire sound insulation cover. 6. Since the Q5 has an energy management system, the battery will not be automatically recognized after disconnection, so it must be manually matched.
13
0
Share

Can Tesla charge at all charging stations?

Tesla models sold in China come with a free national standard charging port adapter for owners, so Tesla can charge at all charging stations. Here is some relevant information: 1. Tesla's pure electric vehicles feature very attractive exterior designs, high-tech interior styling, excellent performance, and long driving ranges. 2. Most Tesla vehicles are equipped with two motors, one on the front axle and another on the rear axle. The power delivery method of electric motors differs from internal combustion engines. While typical gasoline or diesel engines need to reach certain RPMs to deliver maximum torque, electric motors do not. 3. When an electric vehicle is stationary and the accelerator pedal is fully depressed, the motor can immediately deliver maximum torque. This power delivery method is particularly suitable for urban road driving. 4. Pure electric vehicles have obvious advantages but also significant disadvantages, such as slow charging speeds, limited driving range, and high battery replacement costs.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.