···
Log in / Register

Does Touching the Line in an S-Curve Result in Penalty Points?

6Answers
HannahDella
07/29/2025, 03:42:25 AM

Touching the line with the vehicle body in an S-curve does not result in penalty points. Below are the precautions and techniques for navigating curves in a car: Precautions for Turning in a Car: Do not make sharp turns when the engine is near the turning point. When the bumper aligns with the protrusion, quickly turn the steering wheel to the left or right to the maximum position. Avoid pressing the accelerator pedal. Observe whether you can proceed forward. If uncertain about the angle at the corner, you can stop and check in advance. Always pay attention to the movement of the body and changes in the steering wheel position. S-Curve Entry Techniques: When approaching the entrance of the curve, position the vehicle in the middle of the road. Upon entering the curve, keep the vehicle as close as possible to the straight line on the right. When the gap on the left side of the car's hood aligns with the right yellow line, steer to the left. When turning right at the first curve, steer to the right. Before entering the S-curve, do not look at the arrows on the ground. Position the entire vehicle in the middle of the S-curve and then proceed straight in.

Was this review help?
104
Share
Sebastian
08/12/2025, 10:01:05 PM

I personally experienced the lesson of losing points for brushing the line during the S-curve in my driving test. I was so nervous during the exam that I turned the steering wheel too quickly, causing the right wheel to press against the yellow line. The examiner deducted ten points on the spot. If it weren't for my stable performance in other sections, I would have failed. During practice, the instructor repeatedly emphasized that the key to the S-curve is slow speed, accurate steering, and looking far ahead without distraction. Brushing the line not only leads to exam failure but also poses real-life risks in narrow lanes or when there are obstacles on the roadside—scraping against them can damage the car and be dangerous. I recommend practicing more in open areas, using reference points to align the car's front position, and developing a feel to avoid losing points. Safety should always come first; controlling the car well is a lifesaver.

Was this review help?
18
Share
Expand All
OscarLee
10/04/2025, 04:38:25 AM

Teaching experience has shown me that touching the line in an S-curve will definitely result in point deductions during the driving test. When training students, I often see them turning the wheel without properly aligning with the line, leading to the wheels crossing the boundary and being marked as a violation by the examiner. According to the rules, crossing the line once deducts ten to twenty points, affecting the pass rate. I always remind students to operate at a low speed with steady control, focusing their gaze ahead instead of staring at the steering wheel. Mastering this skill can prevent real-world road troubles, such as a tire blowout or undercarriage scraping when the curb is touched during a turn. Driving relies on muscle memory developed through repeated practice, combined with mirror checks to observe boundaries, ensuring steady progress and safety.

Was this review help?
14
Share
Expand All
DiElle
11/17/2025, 10:25:59 PM

Enforcing the examination standards, I must clarify that touching the line in the S-curve is a violation that incurs penalty points. When wheels cross the boundary or the vehicle body exceeds the line, I will handle it according to regulations, ranging from point deductions to exam suspension, as it reflects insufficient vehicle control. This is equally critical in real-world driving, where exceeding the line can easily lead to collisions with roadside objects. I recommend candidates simulate the tension of the exam during practice, maintain a steady speed throughout, and make minor steering adjustments to ensure smooth navigation. Safety is always the priority; touching the line reveals a lack of spatial awareness, which requires focused practice to develop good habits.

Was this review help?
8
Share
Expand All
ErinRose
01/08/2026, 12:04:27 AM

As a car enthusiast, drifting outside the S-curve during a driving test is a sure way to lose points. I enjoy honing my cornering skills on the track, where precise turns can prevent the car from going out of bounds. In actual practice, high speeds can easily lead to oversteer, and aggressive steering that causes line crossing not only results in point deductions but also reveals weak technique. I recommend practicing a slow-in, fast-out rhythm, using visual reference points to adjust angles and enhance control. This principle applies to everyday driving as well—crossing lines may lead to scrapes or loss of control. Refining your skills not only boosts enjoyment but also ensures safety, so never overlook the importance of fundamental training.

Was this review help?
19
Share
Expand All
RiverDella
04/04/2026, 10:42:31 PM

From a driving safety perspective, deducting points for crossing lines during the S-curve test is completely justified. It's not just an exam rule - in real road conditions, vehicle overstepping lane markings can easily cause scratches or accidents. Personally, I always carefully control speed when encountering curves to avoid deviation. Practicing spatial judgment is crucial - using mirrors and developing a feel for aligning with lane markings helps reduce risks. Driving combines art and science, and line-crossing penalties remind us to focus on details that protect lives while continuously honing our skills.

Was this review help?
19
Share
Expand All
More Q&A

What is the correct method to decelerate when driving a manual transmission car at high speed?

The correct method to decelerate when driving a manual transmission car at high speed is: 1. First, release the accelerator pedal and apply the brakes to slow down; 2. Reduce the speed to an appropriate level based on the actual road conditions; 3. Depress the clutch pedal, shift the gear lever to the gear that matches the speed, and continue driving. A manual transmission requires the driver to manually shift the gear lever to change the gear meshing mechanism inside the transmission, altering the gear ratio to achieve speed changes. A manual transmission mainly consists of gears and shafts, generating speed and torque variations through different gear combinations. The principle is based on the leverage effect, where the largest diameter gear in the lowest gear with the longest radius amplifies the engine torque to assist the vehicle in starting forward movement.
104
Share

Is the Vehicle License Permanently Valid?

Vehicle licenses are not permanently valid. The specific validity periods are divided into six years, ten years, and long-term. The supplementary page indicates the inspection validity period, which essentially marks the deadline for the annual review. Therefore, the validity period of the vehicle license is also linked to the annual review, varying for different types of vehicles. The motor vehicle license is the legal document permitting a vehicle to operate on the road, consisting of a license holder, main page, and supplementary page. The front of the main page displays the endorsed certificate core with black text, while the back features a photo of the vehicle. The supplementary page contains the endorsed certificate core. Issued by the vehicle management center, the vehicle license serves to verify the authenticity of vehicle information.
114
Share

Should You Shift Directly to P Gear or First to N Gear Before Parking and Turning Off the Engine?

Before parking and turning off the engine, first shift to N gear, and then shift to P gear after turning off the engine. The correct parking sequence is to first press the brake to stop the vehicle, then shift to N gear, release the handbrake, and finally shift to P gear. The difference between P gear and N gear is that P gear has a parking lock mechanism, while N gear does not, but both have the nature of neutral gear. Before parking and turning off the engine, make sure the vehicle is no longer moving, has come to a complete stop, or the handbrake has been firmly applied. Otherwise, shifting to either N gear or P gear can cause damage to the transmission. When shifting gears while stationary, also ensure the vehicle is in a braking state to prevent any abnormal movement.
112
Share

How to Turn on the Rear Wiper of a Mercedes-Benz?

The method to turn on the rear wiper of a Mercedes-Benz is to start the vehicle, locate the lever on the left side of the steering wheel, which has a toggle button. The rear wiper is controlled by moving this button back and forth. The rear wiper is the wiper on the rear windshield of the car, commonly found on SUVs, MPVs, hatchbacks, and some liftback vehicles. Taking the 2021 Mercedes-Benz GLC 260 L 4MATIC Dynamic model as an example, this is a mid-size SUV produced by Beijing Mercedes-Benz, with dimensions of 4764mm in length, 1898mm in width, and 1642mm in height, and a wheelbase of 2973mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 145kW, and is paired with a 9-speed automatic transmission.
109
Share

How to disassemble the Besturn B70 car key?

The steps to disassemble the Besturn B70 car key are: 1. There is a round button on the side of the car key. Press this button with one hand and pull out the mechanical car key with the other hand; 2. Hold the key with one hand and a flat-head screwdriver with the other hand. Locate the gap in the middle of the top of the key and insert the flat-head screwdriver into it; 3. Pry the key up and down until a gap is created. If the key does not move, gradually increase the force until it does. Taking the Besturn B70 2021 1.5T manual Yuzhi model as an example, its length, width, and height are 4810mm, 1840mm, and 1455mm respectively, with a wheelbase of 2800mm. It is equipped with a 1.5T turbocharged engine, with a maximum power of 124kw and a maximum torque of 258nm, matched with a 6-speed manual transmission.
101
Share

Where is the front USB port of Tesla Model 3 located?

Tesla Model 3 front USB ports are located on the side of the front passenger seat and the driver's side. Taking the 2021 Standard Range Plus (Made in China) version of Tesla Model 3 as an example, it is a medium-sized 4-door 5-seater sedan with a length, width, and height of 4694mm, 1850mm, and 1443mm respectively, a wheelbase of 2875mm, and a trunk capacity of 425L. The 2021 Standard Range Plus (Made in China) version of Tesla Model 3 is equipped with an electric vehicle single-speed transmission, with a top speed of 225 kilometers per hour, rear-wheel drive configuration, front suspension using double-wishbone independent suspension, and rear suspension using multi-link independent suspension.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.