···
Log in / Register

Does Tire Sealant Damage Tires?

4 Answers
BriannaFitz
07/29/25 7:53am

Tire sealant can cause damage to tires. Here are the detailed explanations: 1. Prolonged use of tire sealant can corrode tires, rendering them unusable: Tire sealant is designed for emergency use only, primarily for immediate repair of punctured car tires to allow continued driving. 2. Situations for using tire sealant and precautions: When a car tire gets punctured while driving and there are no nearby auto repair shops, you can use tire sealant for emergency treatment of the punctured area. Then, drive to the nearest repair shop for proper tire repair. During the repair, ensure the area where the sealant was used is cleaned thoroughly; otherwise, it may cause damage to the car's rims or tires.

Was this review help?
1
0
Share
AnnieFitz
08/13/25 2:51am

After using tire sealant a few times, I believe its damage to tires is real. For example, the chemicals inside can gradually corrode the inner rubber of the tire, especially in hot weather when the reaction speeds up, leading to accelerated tread aging or fine cracks. I've experienced tire balancing issues, where the car would shake at high speeds, increasing safety risks. Additionally, it can stick to the wheel rims, requiring special tools for cleanup; otherwise, it affects the seal even with new tires. It's okay for emergency use once, but don't treat it as a permanent solution. After using it, immediately go to a shop for a thorough repair or replace the tire to avoid higher repair costs later. Remember, tires are crucial for driving safety—don't skimp on small savings at the expense of bigger risks.

Was this review help?
12
5
Share
Expand All
DeAsher
10/05/25 3:04am

As a regular car owner who frequently deals with vehicle breakdowns, I believe the potential harm of automatic tire sealant cannot be overlooked. While it's convenient for temporarily plugging leaks, prolonged accumulation of the liquid inside the tire can cause material deformation or internal corrosion, shortening the tire's lifespan. I once used it, and the tire later leaked twice due to the same area's expanding issues. It's advisable to use it only for emergencies on remote roads and avoid frequent application. If possible, carrying a temporary repair kit is a better option, as tire maintenance directly impacts overall driving comfort and cost-effectiveness. Overall, this product is acceptable for emergencies, but relying on it long-term is risky.

Was this review help?
14
5
Share
Expand All
AylaAnn
11/18/25 4:34am

From a safety perspective, tire sealant can cause internal imbalance in the tire. The uneven distribution of dried sealant may lead to unstable driving or increased risk of tire blowout. I've seen cases where friends experienced fluctuating tire pressure after using it, especially at high speeds. More seriously, it might mask existing damage that could worsen if not addressed promptly. Therefore, after emergency use, seek professional repair immediately to ensure driving safety. Don't delay proper maintenance for minor gains - tire health should never be taken lightly.

Was this review help?
7
5
Share
Expand All
More Forum Discussions

How to Determine When to Replace Spark Plugs?

The main signs that spark plugs need replacement are noticeably high fuel consumption and sluggish vehicle performance with unresponsive throttle. 1. Difficult starting. Whether cold or warm starts, it's nearly impossible to start the engine immediately - even successful starts take 5-6 seconds. This occurs because the spark plug electrodes are severely worn, with rounded edges around the center electrode, resulting in weak and unstable spark discharge. Additionally, excessive spark plug gap leads to insufficient spark intensity and weak penetration power, making it difficult to ignite the air-fuel mixture. 2. Increased fuel consumption. Normal consumption of 7-8 liters per 100km may suddenly jump to over 10 liters. The exhaust pipe emits not just fumes but practically spews money as refueling frequency increases. 3. Noticeable power loss during hill climbs or rapid acceleration. Especially when carrying passengers, the vehicle won't respond even with full throttle. This happens because deteriorating spark plug performance increases misfire rates, causing incomplete combustion of the air-fuel mixture and failure to achieve the engine's designed maximum power output. Spark plug replacement intervals: Under normal maintenance conditions, replacement is recommended at 40,000-60,000 km, though this varies by brand and engine type (consult your owner's manual). Reference these general standards: • Platinum spark plugs: replace at 40,000 km • Standard nickel alloy spark plugs: replace at 20,000 km • Iridium spark plugs: replace at 60,000-80,000 km
3
4
Share

How to Use Rearview Mirrors When Reversing?

Method for using rearview mirrors when reversing: When reversing, pay attention to observing the left and right rearview mirrors. To adjust the left rearview mirror, position the horizon in the center, with the left and right positions adjusted so that the car body occupies one-fourth of the mirror's area. For the right rearview mirror, place the horizon in the upper two-thirds to allow more ground visibility, with the left and right positions the same as the left mirror. Control the vehicle speed when reversing and avoid pressing the accelerator if possible. Below are some precautions for reversing: 1. Always check for pedestrians or electric bikes behind you when reversing. Slow down to minimize danger in case of an accident. 2. When making a U-turn or reversing on a wider road, you can directly judge the position of the rear or wheels on the road through the rearview mirror. On narrower roads, if you cannot accurately determine the position of the rear and rear wheels from the mirror, open the door and observe the rear wheels while operating. When making a U-turn or reversing at intersections or street corners, expand the rear visibility and range, and be cautious of passing vehicles, pedestrians, and bicycles.
20
3
Share

Is an ignition advance angle of 12 degrees or 9 degrees better?

An ignition advance angle of 9 degrees is better, for the following reasons: The ignition advance angle is generally between 6 and 12 degrees. A 12-degree ignition advance angle is too large compared to 9 degrees, which can lead to delayed ignition. If ignition is delayed, the gas will have difficulty performing work, fuel consumption will increase, efficiency will decrease, and exhaust noise will also increase, affecting the engine's working efficiency. Additional information: Ignition advance refers to the spark plug firing before the engine piston reaches the top dead center of compression. The angle through which the crankshaft rotates from the moment the spark plug fires until the piston reaches the top dead center of compression is called the ignition advance angle.
9
3
Share

How Many Questions Are There in Subject 4 Exam?

According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," Subject 4 consists of 50 questions, each worth 2 points, totaling 100 points. Questions 1-10 are true/false; questions 11-40 are single-choice; and questions 41-50 are multiple-choice. The exam includes question types such as image analysis, animated case studies, and textual descriptions. The scope of Subject 4 covers driving knowledge under adverse weather and complex road conditions; identification of common traffic signs, markings, and hand signals; accident rescue and hazardous material handling knowledge; comprehensive judgment of violations and case analysis; emergency avoidance knowledge; safe driving knowledge; and driving ethics and civilized driving knowledge. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," there is no limit to the number of attempts for Subject 1 and Subject 4 exams. If the first attempt on the same day is unsuccessful, a retake can be conducted immediately. If it still fails, a new appointment is required, and no retake fee is charged. However, it should be noted that the validity period of the driving skill test permit is three years. If the applicant fails to complete the exam within the validity period, the passed subject scores will be invalidated. Subject 4, also known as the Subject 4 theory exam or driver theory exam, is part of the motor vehicle driving license assessment. After the implementation of the Ministry of Public Security's Order No. 123, the Subject 3 exam was divided into two parts: the road test and the addition of a safety and civilization knowledge exam, commonly referred to as "Subject 4." Subject 4 is the colloquial term for the Subject 3 safety and civilized driving knowledge exam and is not a separate subject. Since this exam is conducted after Subject 3, it is commonly referred to as the Subject 4 exam. Officially, there is no Subject 4. The safety and civilized driving knowledge exam is conducted after Subject 3. Subject 4 Exam Notes: Exam Duration: The exam lasts 30 minutes, and incorrect answers totaling 12 points (6 questions) will terminate the exam. Number of Questions: Depending on the type of license being tested, 50 questions are proportionally selected from the corresponding Subject 4 question bank. Small vehicle licenses draw from 800 questions, while large vehicle licenses draw from 1,023 questions, with each question worth 2 points. Question Types: The questions include single-choice (including true/false) and multiple-choice. The first 45 questions are single-choice, and the last 5 are multiple-choice. The exam also includes animated questions, image-based questions, scenario recognition questions, and textual description questions. Retake Notes: If Subject 4 is not passed, only Subject 4 needs to be retaken. The driving school will schedule the retake, with no limit on the number of retakes. No retake fee is required for Subject 4. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3, with Subject 3 divided into two parts. Subject 1 refers to the exam on road traffic safety laws, regulations, and related knowledge; Subject 2 refers to the field driving skills exam; and Subject 3 refers to the road driving skills and safety and civilized driving knowledge exam.
9
2
Share

Under What Circumstances Should the Transmission Fluid of the New Santana Be Replaced?

The transmission fluid of the New Santana should be replaced when it becomes viscous, turns black, or emits an unusual odor. Relevant knowledge about the New Santana's transmission fluid is as follows: Automatic Transmission Fluid: The New Santana uses an automatic transmission. The automatic transmission fluid has two main functions: transmitting hydraulic power and cleaning/lubricating. The original color of the automatic transmission fluid is red and transparent. Replacement Considerations: The recommended amount of transmission fluid for the Volkswagen New Santana is approximately 2 liters. When replacing the fluid, it is essential to use the automatic transmission fluid specified by the manufacturer. This is because different automatic transmissions have varying internal structures, friction components, and sealing components. The original fluid is specially formulated based on the transmission's structure and materials. Even if other brands of fluid are of high quality, they may not be suitable.
6
4
Share

Can You Still Drive with Low Tire Pressure Display?

When the tire pressure is too low, it is recommended to find a safe place to stop slowly, then place a warning sign 150 meters away from the vehicle, and finally call the insurance company for assistance. Driving for a long time with low tire pressure can cause significant damage to the tires and, in severe cases, endanger the safety of the driver and passengers. It is best not to let the tire pressure fall below the manufacturer's recommended value, which is generally between 2.2 and 2.5. Below are the hazards of low tire pressure: 1. The tire's self-friction coefficient increases, the tread on the ground becomes flatter, and the non-ground tread loses its normal shape, leading to an abnormal movement cycle that raises tire temperature; 2. Low tire pressure increases tire deformation, making the sidewalls prone to cracks and causing flexing movements, which generate excessive heat, accelerating rubber aging, cord fatigue, and cord breakage, while also increasing the tire's contact area and accelerating deformation; 3. Additionally, low tire pressure can lead to increased fuel consumption, a heavy steering wheel, and a tendency for the vehicle to pull to one side.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.