Does the Yanmar 85G combine harvester have a fault code table?
1 Answers
The Yanmar 85G combine harvester has a fault code table, which is recorded in the manual. Below is an introduction to common harvester faults and their causes: 1. No response or weak starting: No starting response is mainly caused by loose battery terminals or poor grounding of the cable. In this case, tighten the terminals and ensure the grounding wire is securely connected to the body. Also, check the connectors and ensure they are properly connected or replace the electrical components. Weak starting is primarily due to poor terminal contact or insufficient battery power, so tighten the terminals or charge the battery. 2. No power to lights and instruments after starting: Check all fuses, the main power relay, ignition switch, bulbs, wire connectors, etc. Replace fuses, bulbs, relays, or the ignition switch as needed. If the wire or harness plug has poor contact, reconnect the wire plug. 3. No charging: This may be due to the generator fan belt slipping or disconnected wires. Adjust the belt tension or ensure all generator wires are correctly and securely connected. If the ammeter is damaged or the polarity is reversed, replace the meter head or swap the positive and negative terminals. For internal generator faults, repair or replace the generator. Replace the regulator promptly if it is damaged.
