Does the XRV have a particulate filter?

1 Answers
Gregory
07/30/25 2:47am
As long as the model is TURBO, it is equipped with a particulate filter, so the Honda XRV is equipped with a particulate filter. Because those are turbocharged engines, in order to meet the National VI environmental standard, a particulate filter must be installed. A particulate filter is a ceramic filter installed in the exhaust system of a diesel engine, which can capture particulate emissions before they enter the atmosphere. It can reduce the soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate trap through a dedicated pipe. After passing through its densely arranged bag-type filter, the carbon smoke particles are adsorbed on the filter made of metal fiber felt. When the adsorption of particles reaches a certain level, the burner at the end automatically ignites and burns, turning the adsorbed carbon smoke particles into harmless carbon dioxide that is then expelled. To check whether the XRV has a particulate filter, you can use the following three methods: Check the "Owner's Maintenance Manual" and "Owner's User Manual" to see if there is a particulate filter function. In addition, you can carefully check the fault codes in the manual to see if there is a "particulate filter" warning light indicator. Check the label above the oil filler cap. If the oil cap clearly indicates 0W-20 grade oil, it means it is equipped with a particulate filter. Check whether there is a cylindrical section on the exhaust pipe behind the three-way catalytic converter. If there is, that is the particulate filter.
Was this review help?
8
1
Share
More Forum Discussions

What is the appropriate tire pressure for small cars in summer?

In summer, the tire pressure can be about 0.1 bar lower than the standard pressure, with the standard being 2.4-2.5 bar. High temperatures in summer can increase the risk of tire blowouts if the pressure is too high. When inflating tires in summer, car owners should use a pressure gauge to check the pressure to avoid over-inflation, which can cause tire bursts and reduce puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks. Summer tire maintenance tips: 1. Cleaning: Regularly remove stones or debris from the tread grooves to prevent deformation of the tire crown. Check the tire sidewalls for scratches or punctures, and if any are found exposing the cords, replace the tire promptly. 2. Blowouts: Blowouts are not exclusive to summer. If the tire pressure is too low or too high, or if the tread is excessively worn and near the end of its life, tires can burst even in winter. Therefore, preventing tire blowouts should start with regular maintenance.
4
0
Share

Do LED lights need to be installed with ballasts?

The vast majority of vehicle models do not require the installation of ballasts for LED headlights. However, in practice, it is still necessary to analyze based on the specific vehicle model. For example, the Teana's LED bulbs come with an original set of ballasts, so replacing the LED lights also requires replacing the ballasts. There are two types of ballasts: single-unit ballasts and split ballasts. The functions of ballasts are: 1. They have a cold start current of 6.5A (common ballasts are 8.5A~9A or even higher), ensuring fast startup. 2. They feature a wide voltage design, ensuring normal startup under both low and high voltage conditions. 3. During hot starts or when switching power for lighting, the startup current is 5A, reducing the load on the vehicle's power supply due to frequent switching and its impact on other electrical devices in the car. Low current startup prevents bulb aging or light decay and minimizes interference with other vehicle electronic devices.
6
2
Share

Can Cola Clean Car Headlights?

Cola can be used to clean car headlights. Pour cola onto the headlights, then wipe them with a clean towel. If the effect is not noticeable after one application, repeat the process several times. Finally, rinse with clean water and dry. Cola contains acidic substances such as carbonic acid and citric acid, making it an effective cleaning agent. It is particularly effective against rust and grease. For rust on surfaces like paint or chrome strips, which would otherwise require repainting or replacement at a repair shop, cola can clean it off easily unless the rust is severe enough to expose the primer. Headlight covers are typically made from polycarbonate or polymethyl methacrylate plastic, which can become dirty, yellowed, and aged over time, reducing light transmission and dimming the headlights, thus affecting driving. Prolonged exposure to high temperatures, UV rays, and ozone in the air can accelerate the aging of headlight covers. Additionally, prolonged exposure to sunlight is a major cause of headlight yellowing. Avoiding direct sunlight is the simplest way to prevent headlights from turning yellow.
3
2
Share

At an intersection, should straight-going vehicles yield to left-turning or right-turning vehicles?

Yielding to either left-turning or right-turning vehicles when going straight is not in compliance with regulations. The correct yielding rule is that turning vehicles must yield to straight-going vehicles. When straight-going vehicles encounter turning vehicles, it is the turning vehicles that must yield to the straight-going ones, not the other way around. If a traffic accident occurs due to a turning vehicle failing to yield to a straight-going vehicle, the turning vehicle will bear full responsibility. Below are the relevant regulations: When motor vehicles pass through intersections without traffic signals or traffic police directing traffic, in addition to complying with the provisions of Article 51, Paragraphs (2) and (3), they must also adhere to the following rules: 1. If there are traffic signs or markings, yield to the party with the right of way. 2. If there are no traffic signs or markings, stop before entering the intersection, look around, and yield to vehicles coming from the right; vehicles on minor roads must yield to those on major roads. 3. Turning motor vehicles must yield to straight-going vehicles. 4. Right-turning motor vehicles traveling in the opposite direction must yield to left-turning vehicles.
18
1
Share

How to Schedule Subject 4 Exam?

Subject 4 exam scheduling can be done on the official website of the local traffic police department's vehicle management office. Below is relevant information: 1. Notes for Subject 4 exam scheduling: No ticket number is required for Subject 4, you can directly schedule the exam. There is no limit to the number of attempts for Subject 4, as long as it is completed within the validity period of the skill certificate. If you fail the exam, you must wait 10 days before rescheduling. Students whose certificates are about to expire should pay attention to the timing. After passing the Subject 4 exam, the driver's license will be issued on the same day. 2. Notes for canceling a scheduled exam: After submitting the scheduling request, you can cancel the exam appointment online, but it must be done before the appointment is confirmed. After cancellation, the user's priority ranking remains unchanged. For students who have successfully scheduled an exam but cannot attend due to unforeseen circumstances, the exam appointment cannot be canceled online. Please cancel at least one day in advance at the designated window of the vehicle management office. After successful cancellation, the exam slot will no longer be reserved, and you will need to reschedule the exam to take it.
8
5
Share

Why Does the Passenger Side Window Fog Up?

Window fogging occurs simply due to the large temperature difference between the inside and outside of the car. Here are some methods to defog: 1. Use the air conditioning effectively: While driving, you can first turn on the cooling air; if you want a thorough solution, it's best to turn on the heating air before driving or when parked on the roadside until the fog completely disappears. 2. Open windows for air circulation: Based on the principle of fogging, you don't even need to use the air conditioning. Just slightly open both side windows to allow air inside the car to circulate. The advantage of this method is that as the air inside and outside the car circulates, the temperature inside and outside the car will roughly equalize, preventing fogging. 3. Purchase specialized anti-fog products: Anti-fog sprays can be applied to the inside of the windshield and wiped evenly. There are also special anti-fog towels available on the market, which come in dry and wet versions. These towels are more convenient than sprays—just wipe and they work—but their effectiveness is shorter, usually lasting no more than 24 hours.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.