Does the Xingyue L have a particulate filter?

1 Answers
Brantley
07/29/25 5:57pm
The Xingyue L is equipped with a particulate filter. As long as the particulate filter is reasonably designed and regeneration conditions are adequate, clogging issues rarely occur. Here is the relevant information: Since the external appearance of the particulate filter is no different from that of a three-way catalytic converter, and some are even installed directly with the three-way catalytic converter. As is well known, automobile exhaust contains a harmful substance called fine particulate matter. Therefore, the particulate filter is designed to handle this harmful substance, effectively filtering out fine particles from the vehicle's exhaust. For the particulate filter to regenerate, it must accumulate a certain amount of particulate matter, which is then ignited and burned off before being expelled. This allows the particulate filter to function normally in a cycle. A clogged particulate filter can lead to a significant increase in fuel consumption. The first step is to change driving habits and increase highway driving conditions. Avoid prolonged short-distance trips and long periods of driving in congested traffic. Additionally, using low-ash engine oil, high-grade fuel, and regularly replacing the air filter can help meet the combustion conditions of the particulate filter and slow down the occurrence of clogging.
Was this review help?
15
3
Share
More Forum Discussions

What is the horsepower of the Senova X35?

The Senova X35 has a horsepower of 116ps. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 85kw and a maximum torque of 148nm. The engine reaches its maximum power at 6000 rpm and its maximum torque between 3800 to 4800 rpm. In terms of the transmission system, the engine is paired with either a 5-speed manual transmission or a 4-speed automatic transmission. The Senova X35 is a compact family SUV under the Senova brand of Beijing Automotive Group. It measures 4300mm in length, 1815mm in width, and 1640mm in height, with a wheelbase of 2570mm. The vehicle features lion claw-inspired taillight design, and the angel-wing rear fog lamps perfectly echo the front grille.
14
4
Share

What damage does a faulty oxygen sensor cause to a car?

Oxygen sensor failure can cause the following damages to a car: excessive vehicle emissions, deterioration of engine operating conditions, leading to symptoms such as stalling at idle, inaccurate engine operation, and reduced power. The function of an oxygen sensor is to control vehicle exhaust emissions, reduce environmental pollution caused by the vehicle, and improve the quality of fuel combustion in the car's engine. The working principle of an oxygen sensor is similar to that of a battery, with zirconium oxide in the sensor acting similarly to an electrolyte. Its basic working principle is that under certain conditions (high temperature and platinum catalysis), it utilizes the oxygen concentration difference between the inside and outside of the zirconium oxide to generate a potential difference, and the greater the concentration difference, the greater the potential difference.
11
3
Share

What Causes Toyota Parking Assist System Malfunctions?

Toyota parking assist system malfunctions are caused by damage to the radar control box. The parking assist system includes ultrasonic sensors embedded in the front and rear bumpers, each with a diameter of approximately 15mm. The ultrasonic detection signals emitted by the sensors reflect when encountering obstacles. Upon receiving the reflected signals, the sensors promptly feed them back to the system for distance calculation, alerting the driver through sound or video about the distance to obstacles beyond their field of vision. Below are specific introductions to automotive radar types: 1. Speed Measurement Radar: Measures vehicle speed by detecting wheel rotation speed. 2. Obstacle Detection Radar: Observes terrain under low visibility conditions. 3. Adaptive Cruise Control Radar: Maintains a safe speed relative to the vehicle ahead based on both vehicles' speeds. 4. Collision Avoidance Radar: Detects potential collision-causing obstacles on the road ahead of the vehicle.
16
3
Share

How to Replace the Wiper Blades on the New X-Trail?

The method for replacing the wiper blades on the new X-Trail is as follows: 1. Lift the wiper arm away from the windshield and keep it stable in a position perpendicular to the windshield; 2. Press the wiper blade tab and remove the old wiper blade, separating it from the wiper arm, then insert the new wiper blade; 3. Gently rotate the new wiper blade until the hook snaps into place to secure it. The X-Trail is an urban four-wheel-drive vehicle under Nissan, equipped with advanced technologies such as a digital 6-disc high-fidelity theater CD/AUDIO sound system, intelligent remote key system, intelligent voice navigation system, ASCD cruise control system, rearview camera, side-view system, multimedia entertainment system, and anti-glare interior rearview mirror.
20
3
Share

Which Toyota model has GL at the rear?

Toyota models with GL at the rear are the Toyota Corolla. The Toyota Corolla has tail badges of GL, GL-i, and GL-Xi. Here is the relevant information: 1. GL: The GL badge indicates an entry-level model with relatively simple configurations, featuring basic setups such as no sunroof or multifunctional steering wheel. This model focuses on practicality while still meeting general commuting needs, representing the low-end variant of the Corolla. 2. GL-i: Compared to the GL, this Corolla model offers higher configurations, including an operable sunroof and fabric seats. Its overall setup shows significant improvements over the GL, making it a mid-range variant of the Corolla. 3. GL-Xi: This model is equipped with fully automatic air conditioning, leather seats, and a multifunctional steering wheel. The interior is packed with technological features, providing the best driving experience possible. This variant can be considered the top-tier series of the Corolla.
3
5
Share

How to Operate the Automatic Transmission of Sylphy?

The operation method of the Sylphy automatic transmission is as follows: 1. Press the start button directly without stepping on the brake, at this time the ACC light will turn on. Press the start button again, and the vehicle will perform a self-check; 2. Step on the brake, then press the start button to ignite and start the engine. Release the foot brake, and you can choose to warm up the car in place; 3. Step on the foot brake again, shift to D gear, and release the handbrake; 4. Slowly release the foot brake, and smoothly step on the accelerator according to road conditions to add fuel. The Sylphy is a compact car under Dongfeng Nissan, with a length, width, and height of 4641mm, 1815mm, and 1447mm respectively, and a wheelbase of 2712mm. The car adopts high-performance acoustic noise insulation technology and the NissanConnect Nissan Intelligent Connection system, providing owners with a relaxed and pleasant driving experience.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.