Does the Xingyue have CarPlay?

What needs to be done for a vehicle's first maintenance?

Car first maintenance includes changing engine oil, oil filter, cleaning air filter, checking if various fluid levels are normal, inspecting generator belts and wiper blades for damage, checking tire pressure for normality, and examining tires for uneven wear, bulges, or damage. The precautions for first maintenance are as follows: 1. Change engine oil and air filter. 2. Check if the car's coolant level meets the specified requirements. 3. Check the brake fluid level. 4. Check if the power steering fluid reservoir level meets the specified requirements and inspect all system oil pipe interfaces for leaks. 5. Check the battery fluid level and windshield washer fluid reservoir level. 6. Inspect the tension and aging of the generator, air conditioning, water pump, and power steering pump belts. 7. Check if the front and rear lights of the car are complete (including headlights, width indicator lights, turn signals, brake lights, reverse lights, and fog lights). 8. Check tire pressure and wear, tighten tire bolts to the specified torque, supplement tire pressure to the model's specified value, and rotate tires based on wear conditions. 9. Check if the vehicle's exhaust emissions meet standards.

4

3

Share

What are the mindset and techniques for Subject 3 driving test?

Psychological adjustment methods are as follows: Before the test, recall moments when past exams went smoothly or successfully to give yourself positive psychological suggestions. Try deep breathing before the test. During the exam, focus more on techniques rather than winning or losing; concentrate on the operation process rather than the test results. The techniques for Subject 3 are as follows: 1. Reverse parking into garage: When aligning reference points to turn the steering wheel, it's better to turn early than late. Turning early allows room for correction, while turning late may directly result in crossing the line. After entering the garage, adjust the car body, following the principle of turning towards the wider side. Adjustments should be quick with small angles, while also checking the rearview mirror to see if you've reached the stopping point. 2. Parallel parking: Don't leave too much distance when approaching the garage to prevent the left wheel from crossing the line when entering. Turn the steering wheel quickly, otherwise missing one point may lead to missing subsequent ones. When exiting the garage and straightening the wheel, the speed may suddenly increase, so keep the clutch steady. 3. Hill start and stop: While going uphill, observe the distance between the car body and the side line through the rearview mirror. If the distance is large, adjust to the right; if close to crossing the line, adjust to the left. Make quick adjustments with small angles. During the uphill process, slightly release the clutch to prevent stalling due to insufficient power, and always check if you've reached the designated stopping point. When starting, lift the clutch slowly to prevent stalling; lift to the semi-engaged point before releasing the brake to prevent rolling back. 4. Right-angle turn: Before entering the right-angle turn, adjust the distance between the car body and the side line to within 20 cm. Judge the right moment to turn the steering wheel. 5. Curve driving: Follow the curve's trend without fully turning the steering wheel. Don't be careless when exiting the S-curve; ensure the rear wheels don't cross the line.

1

0

Share

What engine is used in the Haval M6?

Haval M6 is equipped with a 1.5T turbocharged engine provided by Hyundai Group, so this engine is made in Korea. The engine model used in Haval M6 is GW4G15B, with a maximum horsepower of 150 hp, a maximum power of 110 kW (150 hp) at 5600 rpm, and a maximum torque of 210 Nm at 2200-4500 rpm, featuring electronic fuel injection technology. For daily maintenance of the Haval M6 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly according to usage conditions and keep the oil level moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and bring dirt back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

7

2

Share

Can the ETC on a car be stolen or hacked?

The ETC installed in cars is generally not susceptible to theft or hacking because the ETC requires inserting a dedicated ETC card, which can only communicate with authorized devices, such as ETC equipment at highway entrances and exits. Handheld devices cannot conduct transactions, making the possibility of theft or hacking after loss almost nonexistent. ETC Card Binding: ETC card binding can be divided into two scenarios: one is binding a credit card, and the other is binding a debit card. How ETC Works: Through the onboard electronic tag installed on the vehicle's windshield, dedicated short-range communication is established with the microwave antenna in the ETC lane at toll stations. This utilizes computer networking technology to perform backend settlement processing with banks, thereby achieving the purpose of allowing vehicles to pass through highway or bridge toll stations without stopping while still paying the required fees.

10

0

Share

Should an Automatic Transmission Vehicle be Started in N Gear or P Gear?

Automatic transmission models control gear changes through the vehicle's onboard computer, where moving the gear shift lever generates signals. Therefore, it is more correct to start the vehicle in P gear. However, for automatic transmission vehicles, starting in either P gear or N gear is feasible, and there is no claim that starting in P gear harms the transmission. Below is an introduction to starting in different gears: 1. From the principle of the transmission, the gear lever does not directly change the transmission's gear. The movement of the gear lever only generates a signal, which is processed by the transmission control system (TCU), equivalent to a microcontroller, and then determines whether to shift gears based on pre-set programs. Thus, for actions that could potentially harm the transmission, the TCU can reduce their occurrence to some extent. 2. Therefore, as long as you do not stay in R gear after starting in P gear, it will not cause harm to the transmission. Hence, it is recommended to start the vehicle in P gear in daily life. Starting in P gear is more worry-free, fuel-efficient, and offers more benefits.

1

0

Share

Can You Continue Driving After a Car Tire Blowout?

You should not continue driving after a car tire blowout. Since the tire loses its supporting force, the stability of the vehicle body is greatly affected, making it highly prone to traffic accidents. It is essential to promptly replace the spare tire or seek assistance. Below are specific repair methods: 1. Cold Patching: This method requires professional tire repair equipment and patches. Remove the damaged tire, clean the puncture site, apply a layer of cold patch glue on the inner side of the tire, and then stick the patch onto it. Cold patching is a common repair method, but it has a drawback: the hole on the tire tread remains, which may damage the tire's steel wires and fabric layers when driving on rough roads. 2. Hot Patching: After applying the patch, use a heating machine to bake the puncture site, ensuring the patch adheres better to the inner side of the tire. Pay attention to the heating time (avoid excessive duration), especially for thinner tires, as improper heating can easily damage the tire. 3. Mushroom Plug: Insert a mushroom-shaped rubber plug from the inside of the tire to the outside, completely sealing the puncture. Then, trim the exposed part and secure the inner part with special glue. This method not only provides external repair but also offers excellent internal repair effects.

4

1

Share

Does the Xingyue have CarPlay?

What needs to be done for a vehicle's first maintenance?

What are the mindset and techniques for Subject 3 driving test?

What engine is used in the Haval M6?

Can the ETC on a car be stolen or hacked?

Should an Automatic Transmission Vehicle be Started in N Gear or P Gear?

Can You Continue Driving After a Car Tire Blowout?

Can a new car be serviced outside of a 4S dealership?

How to Turn on the Air Conditioning in a Citroën Car?

How to fold down the rear seats of a BMW X1?

What is the tire speed rating symbol?