Does the Xingrui support CarPlay?

How to Set the Auto-Dimming Rearview Mirror Function?

Here are the detailed steps to set the auto-dimming function for the rearview mirror when reversing: 1. Power on the vehicle without starting the engine (press the start button without depressing the brake pedal); 2. Set the memory seats to positions 1, 2, or 3 and select a seat position; 3. Choose the side mirror you wish to set and press the mirror adjustment selection button (left or right); 4. Depress the brake pedal, shift into R (Reverse) gear—the selected mirror will automatically tilt down to the factory preset position. Use the 4-way adjustment button to set it to your preferred position; 5. Press and hold the seat memory button (1, 2, or 3) for about 2 seconds—hold the button corresponding to your chosen memory position; 6. Depress the brake pedal, shift into P (Park) gear, and press the mirror adjustment selection button once more to complete the setup.

7

1

Share

How many days do I have to wait for a retake if I fail the Subject 4 test?

If you fail the Subject 4 test, you need to make an appointment for a retake. Generally, you have to wait about ten days to schedule the Subject 4 retake. You can retake it again in about a month. Usually, you will receive a success notification message within four to five days after applying. According to Article 44 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," each subject test can be taken once, and those who fail can retake it once. If you do not participate in the retake or fail the retake, the applicant should schedule the test again after the test is terminated, but the Subject 2 and Subject 3 tests should be conducted within ten days. In fact, Subject 4 is part of the Subject 3 safety and civilized driving knowledge test. If you fail the Subject 4 test without having failed the previous test, you can schedule a retake on your own without paying any retake fees.

3

1

Share

How to Prevent Wheel Skidding?

Methods to prevent wheel skidding: 1. Maintain a safe distance: Always keep a safe distance so that when situations arise ahead, you have sufficient time and space to react, ensuring driving safety. Pay attention to controlling your speed when turning, and avoid excessive speed that could cause wheel skidding. 2. Maintain a safe speed: Avoid sudden or harsh acceleration, and ensure that the action of pressing and releasing the accelerator pedal is smooth. If side skidding occurs during acceleration, reduce the throttle immediately. 3. Be cautious when overtaking or changing lanes: Frequent overtaking or lane changes in rainy weather is very dangerous. If you must overtake, be sure to observe the situation around you carefully, steer smoothly, and overtake safely. Especially on highways, where speeds are very high and the road surface is slippery, sudden steering or acceleration while overtaking can easily cause wheel skidding and lead to traffic accidents. 4. Avoid sudden braking: In rainy weather, it is best to use the "pump braking" method. Use the brakes reasonably, and in case of an emergency, stay calm and do not panic. Avoid slamming on the brakes; instead, ensure that the wheels do not lock up while achieving the goal of quickly reducing speed. This also prevents the drive wheels from locking up and causing side skidding.

20

1

Share

What are the classifications and characteristics of transmissions?

Transmission classifications: manual transmission, automatic transmission, automated manual transmission, continuously variable transmission. Specific introductions are as follows: Manual Transmission: When shifting gears with a manual transmission, it is necessary to depress the clutch, then move the gear lever, and finally release the clutch to complete the gear shift. Automatic Transmission: A good automatic transmission shifts sensitively with reasonable logic, achieving excellent fuel consumption results. Compared to manual transmissions, automatic transmissions are more convenient to operate, generally requiring no gear changes while driving. However, there is a loss in transmission efficiency, resulting in higher fuel consumption than manual transmissions. Automated Manual Transmission: An automated manual transmission is essentially a manual transmission with a control computer added, typically with 5 speeds and lacking D and P gears. Continuously Variable Transmission: A continuously variable transmission can achieve continuous changes in the transmission ratio, thereby achieving the best match between the transmission system and the engine's operating conditions. The advantages are smooth operation, no sense of jerking, and strong driving comfort. The disadvantage is poor torque-bearing capacity and slower response to speed changes.

14

1

Share

What is the difference between A1 and A2 driving licenses?

The differences between A2 and A1 driving licenses are as follows: 1. Different age restrictions. A2 driving license: 24-60 years old. A1 driving license: 26 years old and above, below 60 years old. 2. Different permitted vehicle types. The permitted vehicle types for an A2 license are tractor, B1 (medium-sized passenger vehicle), B2 (large truck), C1 (small car), C2 (small automatic transmission car), C3 (low-speed cargo vehicle), C4 (three-wheeled vehicle), M (wheeled self-propelled machinery). The other permitted vehicle types for an A1 license are A3 (city bus), B1 (medium-sized passenger vehicle), B2 (large truck), C1 (small car), C2 (small automatic transmission car), C3 (low-speed cargo vehicle), C4 (three-wheeled vehicle), M (wheeled self-propelled machinery). 3. Different restrictions. A2 driving license: Cannot drive large passenger vehicles and city buses. A1 driving license: Cannot drive full-trailer and semi-trailer tractors.

12

5

Share

How much engine oil should be added to a 1.5L engine?

1.5L engines typically require 3.5-4.5L of engine oil, but this may vary depending on the vehicle model. You can check the oil dipstick scale after adding oil for specific details. Here's a detailed explanation: Meaning of the dipstick scale: The oil dipstick has two marks: a maximum level and a minimum level. The normal oil quantity should not exceed the maximum mark or fall below the minimum mark; it should remain between these two marks. Method for checking the oil level: After adding oil, start the vehicle and then turn it off. Wait for 3 minutes before checking the oil level. This is because when changing the oil, the oil filter also needs to be replaced. The new oil filter initially contains no oil, and starting the vehicle allows oil to flow into it. Waiting for 3 minutes ensures the oil flows back into the oil pan, providing a more accurate reading. Remember not to check the oil level on a slope, as the tilt of the vehicle causes the oil in the oil pan to tilt as well, resulting in an inaccurate measurement.

1

3

Share

Does the Xingrui support CarPlay?

How to Set the Auto-Dimming Rearview Mirror Function?

How many days do I have to wait for a retake if I fail the Subject 4 test?

How to Prevent Wheel Skidding?

What are the classifications and characteristics of transmissions?

What is the difference between A1 and A2 driving licenses?

How much engine oil should be added to a 1.5L engine?

Why Does the Antifreeze Level Drop Quickly?

Is the Motorcycle Air Filter Important?

What to Do When a Car Exceeds 15 Years?

Is the Beijing Hyundai All-New Elantra a China 6 compliant vehicle?