Does the Wuling Journey have an automatic transmission model?

Which accelerates faster, electric cars or gasoline cars?

Gasoline cars accelerate faster. Here are the specific details: 1. Reason: Gasoline cars indeed have faster acceleration because the conversion of electrical energy to kinetic energy is much quicker than that of fuel to kinetic energy. 2. Pure Electric Vehicles: Also known as battery electric vehicles, these are vehicles powered by a pre-charged battery that supplies electricity to an electric motor, which then propels the vehicle. The battery's charge is replenished by an external power source, and these vehicles meet all road traffic and safety regulations. Due to their relatively smaller environmental impact compared to traditional cars, their future prospects are widely optimistic. 3. Components of Electric Vehicles: The components include the electric drive and control system, mechanical systems for power transmission, and working devices to accomplish set tasks. The electric drive and control system is the core of an electric vehicle and the biggest difference from internal combustion engine vehicles. This system consists of the drive motor, power source, and motor speed control device, among others. Other components of electric vehicles are essentially the same as those in internal combustion engine vehicles. 4. Working Principle: Battery → Current → Power regulator → Motor → Power transmission system → Drives the vehicle forward.

10

0

Share

What are the clutch control techniques for Subject 2?

There are three main clutch control techniques for Subject 2, which are the correct way to press the clutch, controlling the lifting range of the clutch, and feeling the vibration frequency of the car body. The following is the detailed introduction: 1. Clutch pressing action: The standard action for pressing the clutch is to place the front part of the foot on the clutch pedal, with the heel on the ground, then press the clutch to the lowest point, keeping the knee bent without lifting the heel. If not, adjust the seat distance forward or backward. 2. The range of pressing and lifting the clutch: The clutch is quite sensitive. When the speed is too fast, do not expect to press the clutch suddenly to reduce the speed. The correct method is to press it down slowly to reduce the car's power, thereby achieving the effect of deceleration. 3. Feeling the car body vibration: After the clutch reaches the semi-engagement starting point, you can feel the engine vibrating. When there is a slight vibration, you can basically release the brake and drive, and the speed at this time is more suitable for the test. However, when starting on a semi-slope, you should wait until the car body vibrates significantly before releasing the brake, otherwise the car's power will not be enough to climb the slope, and it will roll back once the brake is released.

15

4

Share

Can Low-Pressure Cast Wheels Be Used for High-Speed Driving?

Casting wheel strength is calculated through design, and as long as they meet standards, there are no safety hazards. Below is relevant information: Gravity Casting Method: This method uses gravity to pour aluminum alloy solution into a mold. After forming, the wheel is processed and polished on a lathe to complete production. The manufacturing process is relatively simple, does not require precise casting techniques, and is cost-effective with high production efficiency. However, it is prone to bubbles (sand holes), uneven density, and insufficient surface smoothness. Many early models from Geely used wheels produced this way, though newer models have mostly switched to updated wheel designs. Forging Method: An entire aluminum ingot is directly extruded into shape on a mold using a thousand-ton press. The advantages include uniform density, smooth and refined surfaces, thin and lightweight wheel walls, and the highest material strength—over 30% higher than cast wheels. However, this method requires advanced production equipment, has a yield rate of only 50-60%, and incurs higher manufacturing costs.

16

5

Share

Does car film continuously release formaldehyde?

Car film does not continuously release formaldehyde; it typically dissipates within about half a month. Car films can generally be divided into three types: composite process film, dyed film, and vacuum thermal evaporation film. Composite process film: Its primary function is to block intense sunlight. This is an earlier type of car film, which basically lacks heat insulation properties. It was initially called sun paper or tea paper. Dyed film: Most dyed car films on the market use deep-dyeing technology, incorporating heat-absorbing agents through deep-dyeing methods to absorb infrared rays from sunlight and achieve heat insulation. However, since it also absorbs visible light, the visible light transmittance is insufficient, and due to inherent process limitations, the clarity is relatively poor. Vacuum thermal evaporation film: This type uses vacuum thermal evaporation technology, where an aluminum layer is evaporated onto the base material to achieve heat insulation. The functions of car film include safety, clarity, anti-glare, heat insulation, and further protection of the privacy of vehicle occupants, enhancing driving safety to a certain extent. After applying car film, a certain amount of formaldehyde is produced. Prolonged exposure to this environment can have adverse effects on health, so timely ventilation and odor removal are necessary to maintain effectiveness. Car film can also help preserve the car's paint.

8

3

Share

What is the problem if the barrier gate does not lift the bar?

Barrier gate not lifting the bar is caused by issues with the vehicle detector, limit switch, card access permission, or control wiring. Vehicle Detector: Check if the vehicle detector's green light is constantly on. If it is, unplug the vehicle detector and then try the remote control manual switch. If it's not functioning properly, replace the vehicle detector. Limit Switch: Manually rotate the handle clockwise to see if it can still turn. If not, rotate it counterclockwise for two turns and then try the remote control again. If the remote control can lift the bar, it means the limit switch's rotation count is too small. After lowering the bar, rotate the handle on the motor counterclockwise for one and a half turns and adjust the limit switch until the indicator light comes on. Card Access Permission: Swipe the card and observe if the relay on the system control board jumps. If it does not jump, the card has no permission. Reissue the card with the necessary permission. Control Wiring: Check the wiring from the control board to the barrier gate board for the lift line and the vehicle detector wiring. If the wiring is correct, the issue might be that the card has no permission or the control board parameters were not restarted after loading.

20

1

Share

Should the Touran use 92 or 95 octane gasoline?

The Volkswagen Touran 1.4T uses 92 octane, while the 1.8T uses 95 octane. These gasoline grades are recommended in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, the Touran's fuel cap will also indicate the recommended grade. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane, those between 10.0-11.5 should use 95 octane, and those with higher compression ratios should use 98 octane. However, with the use of new technologies, the compression ratio alone cannot determine the gasoline grade, as high compression ratios can also be tuned to use lower octane gasoline. This is because factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the wrong gasoline grade is occasionally used in the Volkswagen Touran, simply switch back to the correct grade after the tank is empty. However, long-term use of the wrong gasoline grade can have the following effects: Using a higher octane gasoline in a vehicle designed for lower octane will not cause damage, but the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. Using a lower octane gasoline in a vehicle designed for higher octane can cause engine knocking. The significantly lower octane rating reduces the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug ignites, resistance is created during the upward stroke. This resistance makes the engine run very unstably. If the knocking is mild, it may only increase noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, potentially leading to severe engine damage.

3

1

Share

Does the Wuling Journey have an automatic transmission model?

Which accelerates faster, electric cars or gasoline cars?

What are the clutch control techniques for Subject 2?

Can Low-Pressure Cast Wheels Be Used for High-Speed Driving?

Does car film continuously release formaldehyde?

What is the problem if the barrier gate does not lift the bar?

Should the Touran use 92 or 95 octane gasoline?

How many kilowatt-hours of electricity does an electric car need overnight?

Is the Vehicle Certificate of Conformity Issued Simultaneously with the Car?

Should the Focus use 5W30 or 5W40 engine oil?

Which Vehicles Are Exempt from Expressway Tolls?