Does the Wuling Hongguang miniev have a fuel version?

2 Answers
OMaria
09/04/25 4:06am
Wuling Hongguang miniev currently does not have a fuel version, all models are pure electric. Below is relevant information about the Wuling Hongguang miniev: Configuration: The Wuling Hongguang miniev's electric motor has a maximum power of 20kw and a maximum torque of 85 Nm. The vehicle uses lithium-ion batteries throughout the series, which are stronger and have higher energy density. The front suspension of the Wuling Hongguang miniev uses a MacPherson independent suspension, while the rear suspension uses a multi-link non-independent suspension. Dimensions: The Wuling Hongguang miniev has a wheelbase of 1940mm, with length, width, and height being 2917mm, 1493mm, and 1621mm respectively. This is a 3-door, 4-seat car, with a curb weight of only about 700 kilograms.
Was this review help?
3
4
Share
DeCarson
09/16/25 5:14am
The Wuling Hongguang Mini EV does not have a fuel version; it is a purely electric vehicle designed as a microcar for urban commuting. I have researched this type of model—Wuling positions it as an entry-level new energy vehicle, powered by lithium batteries with low operating costs. A full charge provides a range of 120 to 170 kilometers, making it economical and hassle-free for daily driving. There is no fuel option because its goal is environmental friendliness and energy efficiency. Similar models include the BYD Seagull or Ora Good Cat, which follow the same approach. I’ve driven one and found it compact, agile, and easy to park, though it lacks power for high-speed driving. If you’re considering a fuel-powered vehicle, Wuling’s Hongguang S series might be a better fit, with prices remaining budget-friendly. Now that charging infrastructure is widespread, driving this car is quite convenient. For family users or commuters, it’s a cost-effective choice—charging overnight costs just a few dollars in electricity, and maintenance is simple, with no engine upkeep to worry about.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

How to Remove the Dashboard of a Jetta?

Insert a tool into the gap above the dashboard, then gently pry the dashboard cover loose along the gap direction. Avoid using excessive force to prevent damage. After loosening, remove the dashboard cover by lifting it upwards. Once the cover is removed, use the tool to pry open the air vents on the dashboard. Again, avoid applying too much force; gently loosen them along the fixed positions. Remove the air vents by pulling them straight forward. After removing the air vents, the dashboard unit will be visible. Simply pull it straight forward to complete the removal.
19
4
Share

Does tire wear require replacement?

Tire replacement depends on the specific wear condition, as follows: 1. Observe the degree of tire tread wear: New tires generally have a thickness of about 8mm, and when worn to about 1.6mm, the tires should be replaced promptly, otherwise it will endanger driving safety. 2. Observe the degree of tire surface aging: Aged tires will show a large number of cracks on the surface. If such conditions are found, the tires should be replaced in time, otherwise it may easily lead to a major blowout. 3. Tire repair: When a tire has been repaired more than three times, it should be considered for replacement.
19
2
Share

How to Drive a Car Out of the Garage?

If you don't slow down when driving out of the garage, your car is prone to scrape against the walls and may also collide with other vehicles. Underground garages are usually small, which tests your reversing skills. You must go slowly and look carefully. The slopes in underground garages are generally very steep. If you hesitate midway, the car may stall or roll back, leading to accidents. Underground garages have limited space and high operational difficulty. Experienced drivers should be more considerate of beginners and wait patiently. In underground garages, never follow the car in front too closely, especially when going uphill.
14
2
Share

How to Steer When Reversing to the Right?

When reversing to the right, the steering wheel operation method is as follows: 1. Before reversing, pay attention to the surrounding environment. Turning the steering wheel to the left will make the rear of the car move to the left; turning it to the right will make the rear move to the right. At the same time, use reference points in the rearview mirror to gauge the steering angle, and you can step out to observe before proceeding. 2. When adjusting the car's position, if the rear is leaning to one side, steer to the opposite side to correct it. 3. Precautions: Avoid turning the steering wheel while the car is stationary, as this can damage the vehicle and make the steering wheel hard to turn. If you need to reposition the car, remember to turn the steering wheel one full rotation in the opposite direction at the end of each maneuver.
1
1
Share

How to switch songs in Mercedes-Benz GLC260 music playback?

Press the right arrow button to switch to the next song, and press the left arrow button to switch to the previous song. Then, by sliding the black button on the left side of the steering wheel up or down, you can switch songs. Directly switch the music app on your phone. For some models, the music power button, also known as the play button, is located within the COMAND system and can be operated via the controller on the center armrest. Another method is to use the wake-up phrase "Hey Mercedes," and after it is activated, say "Next song."
1
3
Share

How to Measure the Crankcase Negative Pressure in Volkswagen Audi?

After cutting off a single cylinder, the drop in Px should be as large as possible, which is an indicator to judge the performance of ignition, fuel injection, and sealing in each cylinder. Quickly open and close the throttle. If the needle swings between 6.7-84.6 kPa, it indicates that Px responds well to throttle opening changes, representing good sealing performance. Connect the vacuum gauge to the oil dipstick hole. If a positive pressure is measured in the crankcase, it indicates poor sealing or a blocked PVC ventilation system. Start the engine, remove the filter and spark plug, insert the pressure gauge into the spark plug hole, and stop when the pointer maintains the maximum reading. Record the cylinder pressure gauge reading.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.