Does the Wuling Hongguang Mini have one or two reverse lights?

2 Answers
AveryLee
07/29/25 2:42am
Wuling Hongguang Mini has one reverse light. Relevant information is as follows: 1. Note: When reversing, always check for pedestrians or electric vehicles behind you. Always reverse slowly to minimize potential hazards in case of accidents. 2. Turning around: When making a U-turn on wider roads, you can directly judge the position of the rear or wheels on the road through the rearview mirror. On narrower roads, if you cannot accurately determine the position of the rear and rear wheels from the rearview mirror, you can open the door and observe the rear wheels while operating. When making a U-turn at intersections or street corners, expand your view and range of the rear, pay attention to the movement of passing vehicles, pedestrians, and bicycles, and reverse carefully.
Was this review help?
14
5
Share
McStella
08/12/25 6:37am
I just drove the Wuling Hongguang Mini and noticed it only has one reversing light, located on the left side of the rear. The right side is either fake or just a reflector. This design is quite common because economy cars save costs by using just one light, and regulations allow single-side reversing lights. I observed that the brightness is sufficient when reversing, not affecting nighttime reversing operations. However, it's important to regularly check that the bulb hasn't burned out, otherwise, it might be hard to see behind in rainy weather or dark areas. If there's an issue, simply replacing the bulb will suffice—no need to worry about anything too complicated. Always check if the light is working when parking to maintain safety.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What Causes the Focus Engine to Shake?

The reasons and solutions for the Focus engine shaking are as follows: 1. Ignition system failure: Spark plugs, high-voltage wires, and ignition coils may experience poor performance after a certain period of use. Solution: Check the condition of the spark plugs, high-voltage wires, and ignition coils, and replace the spark plugs if necessary. 2. Aging engine components: When the car engine is idling and the electrical system is turned on, it increases the engine load, causing idle speed to drop. To compensate for the shaking caused by the drop in idle speed, the engine will automatically increase the RPM slightly. Solution: Replace the engine mounts. 3. Unstable oil pressure: Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause engine shaking. Solution: Visit a 4S shop to check the fuel pressure and the intake pressure sensor for normal operation, and replace related components if necessary.
19
2
Share

How to turn off the BMW X3 auto start-stop system?

Method to turn off the BMW X3 auto start-stop function: Simply press the A-off button manually to deactivate it. Below is an introduction to the auto start-stop feature: 1. Working principle: The auto start-stop function automatically shuts off the engine when the car is waiting at a traffic light or briefly stopped, and automatically restarts the engine when needed. Its working principle involves installing a reinforced motor with start-stop functionality on the engine. When the conditions for stopping are met, the engine stops operating, and when it's time to move forward, the motor issues a start command, enabling the engine to start in the shortest possible time. 2. Advantages: The auto start-stop function can save fuel consumption and reduce exhaust emissions into the air. According to statistics, under normal circumstances, a car can save 5% of fuel, and in congested road conditions, it can save up to 15% of fuel, contributing to energy conservation and environmental protection.
7
2
Share

Is Subaru's Fuel Consumption High?

Subaru's fuel consumption is relatively high. The official combined cycle fuel consumption is 7.0-7.4L/100km, urban cycle fuel consumption is 9.0-9.3L/100km, and suburban cycle fuel consumption is 5.9-6.3L/100km. Here is some extended information: 1. Subaru: Subaru is a division of Fuji Heavy Industries (FHI) specializing in automobile manufacturing, established in 1953. Initially, it primarily produced cars and also manufactured aircraft and various engines. It is a manufacturer producing a variety of types and multi-purpose transportation equipment. The logo of Fuji Heavy Industries' Subaru cars adopts the form of a six-star cluster. 2. Philosophy: This brand concept represents Subaru's intelligent and sensitive philosophy towards cars. It signifies Subaru's goal of excellent driving, which is a car highly integrated with driving, environment, and safety. This is what leaves an indelible memory for customers worldwide, especially those who truly enjoy the driving experience. In addition, Subaru is committed to providing consistent value in both new products and services.
8
2
Share

How many liters of engine oil does a Subaru Forester need?

Subaru Forester requires approximately 5 liters of engine oil for an oil change. Additional information: 1. Method for checking engine oil: After adding the oil, start the vehicle and then turn it off. Wait for 3 minutes before checking the oil level. This is because the oil filter is also replaced during an oil change, and the new oil filter is initially empty. Starting the vehicle allows oil to flow into the oil filter. Waiting for 3 minutes ensures that the oil has settled into the oil pan, providing a more accurate reading. 2. Effects of too much or too little oil: Excessive oil can interfere with the normal operation of the crankshaft and increase the vehicle's fuel consumption. Specifically, when the crankshaft journal moves to the bottom dead center, it may come into contact with the excess oil, creating resistance and disrupting normal operation, which is not permissible. On the other hand, insufficient oil means there won't be enough for proper circulation and lubrication, leading to accelerated wear of internal engine components and potential engine damage.
4
0
Share

What is the standard size for roadside parking space markings?

The design standards for parking spaces are divided into four levels. For vehicles with a length not exceeding 6 meters and a width not exceeding 1.8 meters, the standard spacing between vehicles should be no less than 0.5 meters, and the spacing between the vehicle and the wall or the end of the parking space should also be no less than 0.5 meters. For vehicles with a length greater than 6 meters but not exceeding 8 meters, and a width greater than 1.8 meters but not exceeding 2.2 meters, the spacing between vehicles should be no less than 0.7 meters. The standard dimensions for parking spaces are as follows: 1. Straight parking space dimensions: width of 2.5 meters, length of 5 meters or more, with the optimal standard being 2.5m*5.3m. 2. Angled parking space dimensions: width of 2.8 meters, diagonal length of 6 meters, with the vertical distance between the two diagonal lines maintaining the standard of 2.5 meters.
13
2
Share

How to Apply for a Driving Test in a Different Location?

You can directly apply for a change of test location at the local vehicle management office where you currently reside. Below is relevant information about taking a driving test in a different location: 1. Eligible vehicle types for application: When applying for a motor vehicle driver's license for the first time in a temporary residence, you can apply for licenses for large and medium-sized passenger and cargo vehicles, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, small automatic transmission passenger cars for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles. 2. Relevant rules for taking the test in a different location: After passing the subject one test, the vehicle management office will issue a driving learning certificate to the candidate, which must be carried at all times during subsequent subject two and subject three training (both paper and electronic versions are acceptable); Mainland residents holding foreign driver's licenses face additional restrictions when applying to exchange for a mainland driver's license. If the applicant stayed in the issuing country or region for less than three consecutive months when obtaining the motor vehicle driver's license, they must take subject one, subject two, and subject three tests.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.