Does the Volvo S90 spare tire need to be inflated?

2 Answers
KayleeLynn
08/28/25 4:22am
Volvo S90 spare tire needs to be inflated. Most car spare tires require regular inflation. The precautions for using and replacing spare tires are as follows: Precautions for using spare tires: Spare tires should not be used as regular tires for extended periods. The hanging position of the spare tire should be appropriate, and it should be protected from oil corrosion. Be aware of the spare tire model and its service life. Repaired spare tires should be placed on the rear wheels. Pay attention to speed when using a spare tire. The purpose of a spare tire is to prevent the car from breaking down due to tire damage. Precautions for replacing spare tires: When replacing, turn off the engine, engage the handbrake, and put the car in gear to prevent rolling. Place a triangular warning sign and turn on hazard lights. Tighten the bolts diagonally when replacing the spare tire. Adjust the spare tire pressure with a pressure gauge before replacement, and replace the valve stem as well.
Was this review help?
4
3
Share
LylaAnn
09/10/25 2:52am
As a veteran Volvo S90 owner with a decade of driving experience, I've personally learned the importance of maintaining spare tire pressure. Tire pressure gradually leaks over time, especially with spare tires that sit unused for long periods, making them more prone to going flat. I make it a habit to check quarterly using a portable tire pressure gauge, and if it falls below the manual-recommended 60 PSI, I inflate it immediately. Once, during a long trip, I had a flat tire and found the spare underinflated when changing it—the car wobbled dangerously, nearly causing an accident. Since then, I've prioritized regular maintenance. Volvo's compact spare tires require speed limits of 80 km/h, and maintaining proper pressure is crucial for safety. Pro tip: In seasons with large temperature swings, air leaks faster—keeping a small pump in the car helps. This habit not only saves emergency towing costs but also ensures peace of mind while driving.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

How to Deal with Loose Car Decorative Trim Strips?

Methods to handle loose car decorative trim strips: If the trim strips become loose, you can purchase some adhesive to reattach them yourself, or visit a 4S shop to replace them with new ones. During regular use, try to avoid parking the car in direct sunlight, as this can accelerate the aging of these trim strips and lead to loosening. Ideal parking spots during summer include underground parking lots or garages; it's best for car owners to park their vehicles in such locations. The car body has many rubber components, and frequent outdoor parking can speed up their aging process. If rubber sealing strips age, water leakage may occur during rain.
4
0
Share

What Are the Reasons for No Response When Pressing the Car One-Button Start Switch?

Reasons for no response when pressing the car one-button start switch: When the vehicle's smart key runs out of battery, the key's transmission power becomes very low, making it difficult for the car's sensor to detect it, which renders the one-button start function unusable. If the one-button start function malfunctions, the only way to start the car is by using the key. Keys with keyless entry function often have a folding or hidden mechanical key inside. Simply unfold the folding key to find the keyhole and open the door. If the key is hidden, the mechanical key is usually stored inside the main key and can be pulled out when needed to unlock the door.
2
2
Share

How to Turn on the Fog Lights of a Skoda Octavia?

Skoda Octavia fog lights can be turned on by following these steps: 1. Use the light control knob on the left side of the steering wheel. 2. Rotate the knob to the right to the position of the small lights or low beam, then pull the knob towards yourself. 3. The first position is for the front fog lights, and the second position is for the rear fog lights. Additional information: 1. Fog lights are installed at the front and rear of the car to illuminate the road and provide safety warnings during rainy or foggy weather, improving visibility for the driver and other traffic participants. 2. The Skoda Octavia is the first sedan under the SAIC Volkswagen Skoda brand, with dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, and a wheelbase of 2686mm. The exterior design adopts the Skoda family design language, showcasing a simple, stylish, and elegant style.
18
1
Share

Should You Use Recirculation or Fresh Air Mode on the Highway?

Whether to use recirculation or fresh air mode on the highway depends on different situations: In summer, to quickly cool down and maintain the interior temperature, recirculation mode should be used; If there are many passengers in the car, it is necessary to periodically switch to fresh air mode to maintain air freshness. The definitions of recirculation and fresh air modes are: 1. Recirculation mode means the air conditioning system closes external air intake and only circulates the air inside the vehicle; 2. Fresh air mode means the air conditioning system opens external air intake to circulate outside air. The functions of car air conditioning are: 1. To cool, heat, ventilate and purify the air inside the vehicle; 2. To provide a comfortable environment for passengers, reduce driver fatigue, and improve driving safety.
13
0
Share

What is the body length of the Fengon ix5?

Fengon ix5 has a body length of 4685mm, a width of 1865mm, and a height of 1645mm. Taking the 2021 Fengon ix5 as an example, it belongs to the mid-size SUV category with a wheelbase of 2790mm, a fuel tank capacity of 58 liters, and a curb weight of 1570kg. The 2021 Fengon ix5 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 220Nm, paired with a 6-speed manual transmission.
15
1
Share

What is the difference between electronic fuel injection engines and direct injection engines?

Electronic fuel injection engines and direct injection engines differ in their fuel injection methods: electronic fuel injection engines mix fuel with air in the intake manifold before it enters the cylinder for combustion, while direct injection engines inject fuel directly into the cylinder for combustion. Characteristics of electronic fuel injection include: 1. The gas mixes with gasoline in the intake manifold, resulting in a more uniform mixture; 2. The fuel injector angle is precisely aligned with the intake valve, allowing gasoline to clean carbon deposits on the valve to some extent during injection. Characteristics of direct injection include: 1. High precision in fuel injection, eliminating concerns about gasoline adhering to the intake manifold; 2. Direct injection into the cylinder can increase the compression ratio, and atomized gasoline directly lowers the temperature inside the cylinder; 3. Enables stratified combustion.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.