Does the Volkswagen Sagitar have a reverse camera?

2 Answers
Phoebe
07/24/25 6:38am
2020 Sagitar models do not come with a reverse camera across the entire lineup. Here is some relevant information about reverse cameras: 1. The role of a reverse camera: A reverse video image uses a wide-angle camera device with far-infrared installed at the rear of the vehicle, allowing clear visibility of obstacles behind the car through the display screen inside the vehicle. 2. The function of a reverse camera: If the Sagitar were equipped with a reverse video image function, when the Sagitar owner shifts into reverse gear, the system would automatically activate the high-definition reverse camera located at the rear of the vehicle, clearly displaying the situation behind the car on the LCD screen, enabling the Sagitar owner to accurately grasp the road conditions behind and reverse as easily and confidently as moving forward.
Was this review help?
4
5
Share
Campbell
08/11/25 2:19am
A friend who has driven several generations of Sagitar tells you that most Sagitars on the market now come with a rearview camera. My own 2019 luxury version came with a high-definition camera from the factory—just shift into reverse, and the screen immediately displays a live view of the rear, complete with clear distance markers for obstacles behind. However, older base models might require an aftermarket installation, which costs around 2,000 yuan at a 4S shop for an original part. This feature is especially helpful for beginners, making it easier to spot blind-spot obstacles like stone pillars in narrow alleys. It’s also far more reliable than parking sensors in rainy or foggy conditions. If you buy a used Sagitar without this function, it’s recommended to have it installed at a reputable modification shop.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

How to Repair Motorcycle Scratches?

If the scratch is light, it can be removed by polishing with rubbing compound; if the scratch is deep and the primer is exposed, it can only be handled at a repair shop. Minor scratches can be treated by applying toothpaste to the affected area.
9
3
Share

How to Replace the Xenon Bulb in a 2010 LaCrosse?

Open the hood and locate the headlight position, then remove the dust cover; Disconnect the power connector, release the spring clip, hold the headlight socket and rotate the bulb counterclockwise to remove the socket; Insert the headlight socket into the lamp holder and reposition the spring clip. Insert the headlight bulb into the socket and rotate it clockwise to lock it in place; Tuck the driver and power cable into the assembly; Finally, replace the dust cover. Test the light to complete the installation.
3
4
Share

What to Do If You Accidentally Add Diesel to a Motorcycle?

First, it needs to be drained out. After mistakenly adding diesel, it is necessary to clean the fuel tank, fuel lines, and carburetor. Once diesel is mistakenly added, the motorcycle will immediately stall, and then experience difficulty starting.
11
1
Share

How to Properly Install a Motorcycle Carburetor?

First, thread the throttle cable through the carburetor top cover. Then, slide the spring onto the throttle cable. Next, pass the throttle cable through the throttle valve hole and pull it out from the adjacent slot, winding it all the way to the bottom. Finally, place the throttle cable head into the groove at the bottom of the throttle valve.
19
3
Share

How to Adjust the Air-Fuel Mixture Ratio of a Motorcycle?

Turning the mixture screw clockwise enriches the air-fuel mixture, typically by screwing it all the way in and then backing it out one and a half turns. Then, adjust the mixture screw left or right until the idle speed reaches its highest point. After that, fine-tune the idle speed to stabilize it.
5
1
Share

How to Check the Tire Wear Indicator Triangle?

To check the tire wear indicator triangle: 1. Locate the small triangular arrow mark on the side tread pattern of the tire; 2. Follow the mark to find the raised indicator in the groove of the tire tread; 3. When the tread depth is lower than the wear indicator, it means the tire is nearing the end of its life. Tire maintenance methods: 1. Ensure correct tire pressure; 2. Regularly check for bulges, cracks, cuts, punctures, or abnormal wear; 3. Inspect the tire surface for stones, nails, or other hard objects and clean them promptly; 4. Perform tire rotation. Tire rotation methods: 1. For bias-ply tires, swap the tires on the same axle to ensure even wear on both sides; 2. For radial tires, rotate them within the same side of the vehicle.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.