Does the Volkswagen Lavida Start have a particulate filter?

2 Answers
TaliaLynn
07/30/25 1:59am
Volkswagen Lavida Start does not have a particulate filter. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, which captures particulate emissions before they enter the atmosphere. Function of the particulate filter: The particulate filter can reduce soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the engine exhaust particulate trap through a dedicated pipeline. After passing through its densely arranged bag-type filter, the carbon particles are adsorbed on the filter made of metal fiber felt. When the amount of adsorbed particles reaches a certain level, the burner at the end automatically ignites and burns, turning the adsorbed carbon particles into harmless carbon dioxide that is then emitted.
Was this review help?
8
0
Share
DelAlina
08/15/25 7:55am
Speaking of the particulate filter in the Volkswagen Lavida Horizon, based on my car enthusiast experience, it is indeed equipped with this component. I've studied some of its configurations—the Lavida Horizon was designed to meet the China 6b emission standards, especially the 1.5L gasoline engine version, where the particulate filter is one of the standard parts. It effectively captures fine particles in the exhaust, reducing pollution. In practical use, if not regularly maintained, clogging issues may arise, such as the emission warning light on the dashboard or reduced power. In such cases, driving at high speeds can help regenerate it. I recommend owners pay attention to the vehicle manual's guidelines or perform simple self-checks: look for a mesh-like device near the exhaust pipe. Keeping the particulate filter healthy not only benefits the environment but also avoids repair costs. Overall, this is a must-have feature in modern cars—don’t overlook it.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How to Start a Manual Transmission Car Quickly Without Stalling?

The key to starting a manual transmission car lies in the coordination between the throttle and clutch. It is recommended to start on flat ground by shifting into neutral, then gently pressing the accelerator with your right foot. Lightly press the accelerator to slightly increase the RPM to around 2000, then slowly release the clutch to allow the car to start smoothly. More details on quick starting for manual transmission cars are as follows: 1. Starting on flat ground: First, start the car in neutral, then quickly press the clutch and shift into 1st gear. Slowly release the clutch until you feel the wheels begin to turn, then hold the clutch steady and lightly press the accelerator. Once the car moves forward, hold the clutch steady for 2-3 seconds, lightly press the accelerator, and slowly release the clutch for a stable start. Use the same method to shift into 2nd gear. 2. Starting at a traffic light: When the light turns from red to yellow, immediately shift into 1st gear, release the clutch to find the semi-engagement point (or at least the initial engagement point where you feel slight vibration), and hold the brake. When the light turns green, immediately release the brake, release the clutch, and lightly press the accelerator for a quick start. This process is 2-3 seconds faster than waiting for the light to turn green before operating. 3. Starting on a slope: First, press the brake, then press the clutch and shift into 1st gear. Slowly lift the clutch pedal with your left foot until you hear the engine sound change slightly, indicating the clutch engagement point. At this point, the car will start to shake slightly. Now, release the brake pedal, and the car will not roll backward. Lightly press the accelerator, and the car will start smoothly. After the car starts, slowly release the clutch pedal.
1
1
Share

What are the reasons for being unable to shift gears after a vehicle has been submerged in water?

There are several reasons why a vehicle may be unable to shift gears after being submerged in water: water may have seeped between the clutch plates, causing them to stick together, making gear shifting difficult or impossible. Additionally, if there is a gear collision sound in the transmission, it is highly likely that the clutch has been flooded, preventing gear engagement. 1. If the vehicle cannot shift gears after passing through deep water, the following steps can be taken: with the engine off, engage the handbrake, and first try shifting into first gear or reverse gear. After starting the engine, release the handbrake, and only shift into other gears once the vehicle is moving. 2. Additional information: When driving through flooded areas, it is essential to slow down and proceed cautiously. Driving too quickly can cause water to splash into the air intake, potentially leading to engine stalling.
17
2
Share

Can Car Lights Be Modified to Xenon Lights?

It is allowed to install xenon lights on cars, but they must be equipped with lenses to be legal. The following is relevant information about car modifications: 1. Introduction to Car Modifications: This involves replacing, adding, or removing parts of the original factory model or altering its appearance. Reasonable and scientific modifications can make the original car safer to drive and improve its performance. Car modifications are both an expression of personal style and a means to enhance driving performance and safety. 2. Regulations on Car Modifications: Laws and regulations impose restrictions on car modifications. The car model, engine model, and chassis number cannot be altered, and the car's structural integrity must not be compromised. If the car's color is changed, or the engine, body, or chassis is replaced, the car must be inspected. Additionally, a safety technical inspection certificate must be submitted for replacing the engine, body, or chassis. The area covered by car stickers must not exceed 30% of the total body area; exceeding this limit requires approval from relevant authorities.
15
4
Share

Will a Cut-and-Splice Vehicle Break Apart?

Cut-and-splice vehicles generally do not break apart. These vehicles refer to automobiles that are assembled by privately combining parts in violation of China's regulations regarding automobile production. Additional information: The concept of a cut-and-splice vehicle is entirely different from that of a modified vehicle. Cut-and-splice vehicles typically suffer from a range of issues, including poor quality, high costs, and failure to meet national safety inspection and operational technical standards. In some cases, assembly quality problems may even lead to accidents. As a result, the production of cut-and-splice vehicles is strictly prohibited by the state as an illegal activity. If a cut-and-splice vehicle or a vehicle that has reached the end of its service life is driven on public roads, the traffic management authorities of the public security department will confiscate and forcibly scrap it. Drivers operating such vehicles on public roads will be fined and have their driver's licenses revoked.
8
3
Share

Is It Serious If a Small Amount of Water Enters the Engine Air Intake?

It is not very serious if a small amount of water enters the engine air intake. Here are the specific symptoms of slight water ingress in the engine: 1. Abnormal engine oil condition: Normal engine oil colors include light yellow, brown, and transparent colorless, but it generally does not appear milky white. Pull out the dipstick to check if there is a milky white oil-water mixture. If present, it could indicate water in the engine. 2. Check the air filter: Inspect the air filter and the lower housing for obvious signs of water ingress. Also, check the intake pipe and intake manifold for clear traces of water. 3. White smoke from the exhaust pipe: If there is water in the engine fuel or combustion chamber, the water is heated by the combustion heat in the cylinder and turns into steam, which is expelled from the exhaust pipe as white smoke. If white smoke appears after the vehicle has driven through water, it is highly likely that water has entered the engine.
19
2
Share

Is it okay to drive at 66 in a 60 speed limit zone with interval speed measurement?

Driving at 66 in a 60 speed limit zone with interval speed measurement exceeds the speed limit by 10%. On highways or national roads, exceeding the speed limit by less than 10% results in a warning without penalty points or fines, and no need to undergo processing. The penalties for exceeding the speed limit in highway interval speed measurement zones are as follows: 1. Exceeding by less than 10%: On highways or national roads, a warning is issued without penalty points or fines. 2. Exceeding by 10% to 20%: 3 penalty points and a fine. 3. Exceeding by 20% to 50%: 6 penalty points and a fine. 4. Exceeding by more than 50%: 12 penalty points and a fine. 5. Gradually doubling the fine amount: The fine amount increases gradually with the increase in speed, doubling until exceeding 100%, where the fine amount is capped.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.