Does the Volkswagen CC Xuanmu Edition not have a rearview camera?

2 Answers
McCamila
07/24/25 1:07am
Volkswagen CC Xuanmu Edition does not have a rearview camera. Introduction to Rearview Camera: The car rearview camera is a system in vehicles. This newly developed reverse viewing system is intuitive and clear, providing great convenience to car owners. It allows drivers to monitor the video feed of both sides and the rear of the vehicle in real-time, preventing accidents and theft. Functions of Rearview Camera: The car rearview camera is a safety assistance device during reversing. It can display images to inform the driver about surrounding obstacles, eliminating the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle. It helps the driver overcome blind spots and unclear vision, enhancing driving safety.
Was this review help?
4
4
Share
DeEmiliano
08/10/25 8:51pm
I worked in a repair shop for many years. The Volkswagen CC Glamour Edition is quite a high-end model, and most versions come with a rearview camera, as it's a practical feature to prevent hitting obstacles when reversing. However, it depends on the specific year and region. For example, models after 2019 usually have it as standard. It's best to check the manual or ask the salesperson before buying. If it doesn't have one, you can also install an original or aftermarket module, which costs around a few hundred yuan. Nowadays, driving without a rearview camera is really inconvenient, especially at night or in rainy weather when the mirrors aren't clear. This gadget helps you see the panoramic view from the rear camera. In short, I recommend that car owners regularly check and clean the camera lens, as a dirty lens may cause blurry images and affect safety.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

How to Reset the Service Wrench on Lavida Hatchback?

First, open the car door and enter the vehicle, then insert the key into the ignition switch without starting the engine. Locate the protruding black button on the dashboard and hold it down. Next, turn the key to the second position, which is the ON position. The car will power on and begin self-check, during which all warning lights will illuminate—this is normal. Wait for the self-check to complete (keep the button pressed throughout this process). After about 5 seconds, the wrench icon will disappear.
10
3
Share

How to adjust the Kuangbazi tire pressure monitoring?

Tire pressure monitoring is displayed on the multifunction display screen, with sensors installed inside the four tires. Press the up or down arrow button to select tire pressure, then press the OK button to display the tire pressure of each tire on the multifunction display screen. When the pressure is too high or too low, a warning will be issued. The standards for too high or too low are based on the safe tire pressure set by the car owner.
3
1
Share

Can a 20-Year-Old Vehicle Still Drive on Highways?

20-year-old vehicles can drive on highways. Here is relevant information: Entering the highway starting point: Drivers should accelerate to over 60 km/h as soon as possible. Vehicles entering from the ramp must increase speed in the acceleration lane and must not obstruct vehicles already in the main lane when merging. They should drive in the outer lane. No arbitrary lane changes: When changing lanes or overtaking, turn signals must be activated in advance. At night, drivers must also switch between high and low beams, confirm safety before changing lanes, and only use adjacent lanes for overtaking.
10
5
Share

Where is the oil filler port located on a forklift?

The oil filler port on a forklift is generally located on the left side of the engine. Here are the relevant instructions: When performing routine operations such as changing the oil, and needing to reinstall the oil filler cap, use the oil on the dipstick to lubricate the cap opening, then smoothly tighten it in the clockwise direction until it's properly seated. The amount of oil added should be slightly below the standard mark. Adding too much oil (exceeding the upper limit on the dipstick) can have the opposite effect. Excessive oil increases the rotational resistance of the crankshaft, reduces the engine's output power, and the excess oil may enter the combustion chamber, leading to oil burning, blue smoke emission, and increased fuel consumption.
12
3
Share

Where is the Honda Accord's cabin air filter located?

Honda Accord's cabin air filter is located behind the glove compartment on the passenger side. To replace it, you need to first pry open the protective panel and remove the clip, then unscrew a hex socket screw. After removing the screw, you can take off the small cover plate and replace the old cabin air filter with a new one. Compared to other vehicles in the same class, this car has a relatively wider body width and lower height, creating a low-slung stance that exudes a strong sporty vibe. The Accord is a mid-size sedan launched by GAC Honda. In terms of body dimensions, the Honda Accord measures 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm.
19
5
Share

What does the diag switch on a forklift mean?

The diag switch on a forklift is used to switch between flat ground operation and slope operation modes. Most forklifts are typically set to the slope operation mode. Below is a related introduction: The diag button in a vehicle refers to the self-check button for the engine's electronic control system. DIAG stands for the ECU computer diagnostic switch. When the engine fault light and SVS light on the dashboard illuminate, this switch can be used to diagnose fault codes via the ECU, making it easier to locate and repair faults. Regular use of this button can correct system data that the electronic control system may have lost over time, ensuring the proper functioning of the electronic control system.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.