Does the Verano support CarPlay?

What is the purpose of an active grille shutter?

Active grille shutter functions: An active grille shutter is an adjustable grille that can automatically regulate its opening degree. It can adjust the open or closed state of the grille based on vehicle speed and cabin temperature. After the vehicle starts, the active grille shutter automatically adjusts its opening degree according to the engine temperature, achieving rapid warm-up effects and allowing the engine to reach its optimal working condition in the shortest time. Location: The radiator for the car engine is located at the front of the vehicle. When the engine is just started, its temperature is not very high, and the demand for cooling is minimal, so closing the grille is beneficial. Development: Closing the grille allows the engine to heat up quickly. The engine's temperature is not the lower the better; it has an optimal operating temperature range. Only when the engine is within this range can fuel efficiency and power output be at their best.

2

4

Share

What does rearview mirror coating mean?

Rearview mirror coating refers to: Applying a film-like coating layer on the windshield and exterior rearview mirrors. Its primary function is to prevent water from adhering, allowing rainwater to slide off directly during rain without affecting visibility. Introduction to coating: Automotive coating is a paint protection service. It involves evenly applying an inorganic film made of environmentally friendly materials such as glass cellulose, silicon polymers, fluorine polymers, and high-purity water onto the car's paint surface. This creates a hard, oxidation-resistant glass protective layer through a chemical reaction with the paint, shielding the car from external damage, enhancing paint hardness and gloss, and making the body smoother and more radiant. Functions of coating: Automotive coating differs from car wax as its smaller molecules form a tighter and more durable protective layer on the paint surface. It provides waterproofing, protection against acid rain, UV resistance, and prevents paint oxidation and fading.

16

4

Share

What's the matter with ABS and vehicle stability control malfunction?

It may be that the vehicle's anti-skid module and actuator have malfunctioned. It is recommended to contact a local authorized dealer for inspection. ABS: ABS stands for Anti-lock Braking System. Its function is to automatically control the braking force during vehicle braking, preventing the wheels from locking up and maintaining a state of rolling and sliding (with a slip ratio of about 20%), ensuring maximum adhesion between the wheels and the road surface. Vehicle Stability System: Its function is to monitor the driving state of the vehicle. When insufficient steering or oversteering occurs during emergency obstacle avoidance or turning, it prevents the vehicle from deviating from the ideal trajectory.

16

1

Share

Is White Smoke from the Engine a Sign of Cylinder Scoring?

White smoke from the engine is not a sign of cylinder scoring. The emission of milky white oil mist from the exhaust pipe is mainly caused by poor fuel vaporization, where unburned fuel is expelled through the exhaust pipe, forming a milky white smoke. This is more common when starting the engine in winter due to low temperatures and poor fuel atomization. Typically, this smoke disappears as the engine warms up after starting. If the exhaust pipe emits a large amount of water vapor and white smoke, with water droplets at the exhaust pipe outlet, it is caused by coolant leaking into the cylinder or water vapor formed due to moisture in the gasoline. Details are as follows. When the engine is running and the exhaust pipe emits a large amount of water vapor and white smoke: Check if there is water in the fuel tank, inspect whether the cylinder gasket is damaged, if there are cracks in the cylinder block, and if the cylinder sleeve sealing ring is in good condition. When a car parked in winter or during the rainy season is started for the first time, white smoke is often visible: Once the engine temperature rises, the white smoke will disappear, and this condition does not require repair. If the exhaust pipe emits black smoke after the engine warms up, it indicates that the cylinder pressure is too low or a specific cylinder is not working, and it should be checked and addressed. Friction between the cylinder sleeve and piston: Friction between the main bearing, connecting rod bearing, and crankshaft journal due to insufficient oil can cause high surface temperatures in the moving parts, leading to surface scoring or scratching (cylinder scoring or bearing seizure) and producing white smoke. This condition does not require repair.

18

2

Share

What Causes the Tire Pressure Monitoring to Be Currently Unavailable?

Tire pressure monitoring may currently be unavailable due to low transmission strength, insufficient receiver sensitivity, signal interference, depleted module battery, obstruction at the module inspection port preventing detection, module pairing failure, or module damage. If the issue lies with the module, the general solution is to replace the entire tire pressure monitoring module. The tire pressure monitoring system is an active safety device that alerts the driver in time when signs of tire danger appear, prompting them to take appropriate measures to avoid serious accidents. It ensures that tires operate within the specified pressure and temperature range at all times, reducing tire damage and extending their lifespan. Classification of tire pressure monitoring systems: Indirect tire pressure monitoring system: Determines tire abnormalities by analyzing differences in tire rotation speed. Direct tire pressure monitoring system: Equips each tire with a pressure sensor to monitor tire pressure and temperature in real-time, whether the vehicle is stationary or in motion. It provides timely alerts for high pressure, low pressure, or high temperature to prevent traffic accidents caused by tire failures, ensuring driving safety.

19

2

Share

Are the window trims on factory cars glued on?

The window trims on factory cars are generally glued on. When installing window trims, it is essential to use high-quality adhesive; otherwise, these trims may fall off during use. Window trims, also known as window moldings, are automotive accessories installed around the edges of car windows for decorative and wind-blocking purposes. High-quality window trims are usually made of stainless steel. Window trims enhance the car's appearance, significantly improving strength, hardness, and wear resistance while reducing plasticity and toughness. Chromium can increase the steel's oxidation resistance and corrosion resistance, providing protection for plastic parts. The reason for white spots appearing on car trims is the disappearance of the chromium plating layer, caused by harsh driving conditions, prolonged exposure to rainwater, or high salt content in the air.

15

1

Share

Does the Verano support CarPlay?

What is the purpose of an active grille shutter?

What does rearview mirror coating mean?

What's the matter with ABS and vehicle stability control malfunction?

Is White Smoke from the Engine a Sign of Cylinder Scoring?

What Causes the Tire Pressure Monitoring to Be Currently Unavailable?

Are the window trims on factory cars glued on?

What is Engine Compression Ratio?

Will points be deducted for the driver touching the passenger's chest?

What are the effects of leaving the car air conditioning on overnight after the engine is turned off?

Is Car Sticker Decoration Illegal?