···
Log in / Register

Does the vehicle inspection require the owner to go in person? Can someone else go instead?

3 Answers
NevaehAnn
07/29/25 11:14pm
Vehicle inspection does not necessarily require the owner to go in person; someone else can go instead. Here are the specific details about vehicle annual inspection: 1. Introduction: Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety." Vehicle annual inspections can promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents. 2. Online Appointment: Currently, both new and used vehicles can schedule an annual inspection. Before scheduling an inspection, ensure all traffic violations have been processed. Additionally, vehicles can only be scheduled for inspection within three months before the expiration of the current inspection period. The appointment is valid for one week starting from the day after the application. If you cannot attend the appointment, cancel it in advance. Two consecutive no-shows will result in being blacklisted in the appointment system and losing access to the inspection appointment service.
Was this review help?
19
3
Share
McAlex
08/16/25 1:31am
I remember when I first went for a vehicle inspection, I was also quite confused about whether I needed to go in person. After trying a few more times, I found that it's not necessarily required for the owner to be present—you can ask a friend or relative to help. The key is to bring all the necessary documents: your original ID card, the vehicle registration certificate, and the car's insurance policy. Some places might also require a simple letter of authorization specifying who is handling the process for you. I recommend checking the location of the inspection station in advance and avoiding peak hours to save time. If the car has any minor issues, get them fixed beforehand to avoid last-minute hassles. If you're busy, delegating the task to someone else is quite convenient, but remember to follow up on the progress to avoid any mishaps—after all, vehicle inspections are a matter of safety.
Was this review help?
13
4
Share
Expand All
DiGianna
10/18/25 7:38am
As a new driver who just got my license, I was initially worried that I had to go for the vehicle inspection myself, afraid of messing it up. In reality, someone else can handle it on your behalf—my dad helped me with it once. The key points are to prepare copies of the vehicle registration certificate, front and back copies of the owner's ID card, and a copy of the proxy's ID. It's recommended to choose an official inspection station and make an appointment in advance to save time. If you ask someone for help, it's best to pick a familiar relative or friend to avoid issues in the process, which could affect your next insurance or annual inspection. Also, check the car's condition beforehand, like tires and lights, to ensure it passes in one go. This way, it’s both hassle-free and safe.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

What type of engine oil is used for JMC Kairun?

JMC Kairun uses engine oil models CI-4 15W40 and CI-4 20W50. For winter routine maintenance, CI-4 15W40 can be chosen, while for summer maintenance, CI-4 20W50 is recommended. If you wish to change the engine oil during later maintenance, you can opt for brands like Shell, Castrol, or Mobil. The viscosity of engine oil changes with temperature, so special attention must be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the vehicle in low temperatures. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better viscosity retention under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a JMC Kairun is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until the flow stops completely. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply some engine oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new engine oil through the filler cap on the engine valve cover. Typically, fill about three-quarters of a standard oil container. Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.
4
2
Share

Which Audi model is FV71410LADCG?

Audi FV71410LADBG model refers to the Audi Q2L 2018 35TFSI variant. Below are the detailed specifications: Powertrain: The Q2L series features only one powertrain configuration: the EA211 1.4T turbocharged engine paired with a 7-speed dry dual-clutch transmission, both tuned for high output, delivering maximum power of 110kW and peak torque of 250Nm. Drivetrain: The Q2L series does not offer all-wheel drive (AWD) systems, being exclusively front-wheel drive. This characteristic actually has no impact on acceleration performance. The dry dual-clutch transmission in the Q2L incorporates a protection program that prohibits launch control functionality, permitting only conventional full-throttle starts. Consequently, the initial power delivery doesn't exceed the tires' traction limits during acceleration.
14
0
Share

What Causes the Wiper to Buzz but Not Move?

The wiper buzzing but not moving could be due to impurities on the glass, poor quality of the wiper blade, or aging, deformation, or hardening of the rubber strip (wiper blade) caused by prolonged use. Below are other possible reasons: 1. Linkage Mechanism: Deformation of this mechanism or influences from the motor or interval relay may cause abnormal noises. Additionally, structural deformation over time can lead to abnormal operation, which may also result in noise. 2. Motor Part: Poor motor performance or issues with external circuit voltage can cause abnormal rotation or noise, such as insufficient working voltage. Furthermore, problems with the relay control section can also lead to abnormal operation or noise.
17
2
Share

Is Car Window Tinting Necessary?

Car window tinting is not a necessity. Here are the pros and cons of car window tinting: 1. Good privacy protection. Generally, car window tinting is one-way, which can protect the owner's privacy, but it requires the owner to carefully choose the tinting film. 2. Anti-explosion effect. In the event of an accident, the glass with tinting film will stick together when broken, avoiding the splashing of glass fragments, which provides protection for passengers. 3. Thermal insulation. High-quality car window tinting films can provide thermal insulation effects during use. In summer, it can effectively control the rise of temperature inside the car, and in winter, it can suppress the dissipation of heat inside the car, maintaining the temperature and creating a comfortable driving environment for the owner. 4. Reduced light transmittance. The light transmittance of car window tinting films does not exceed 90%, especially when applied to the front windshield. The reduced light transmittance may affect driving safety.
1
5
Share

What are the types of car covers?

Car covers come in the following materials: 1. Single-coated material: This type of car cover provides good dust and sun protection but does not protect against rain or scratches and can only be used on one side. Additionally, single-coated car covers are only available in silver, which is highly effective against UV rays. These covers are lightweight, typically around 1 kilogram, and have a lifespan of about 2 years. 2. PEVA material car cover: Made from a blend of PE and EVA, this material offers good softness and slight elasticity. PEVA car covers have high-performance advantages, such as being non-toxic, highly elastic, lightweight, breathable, windproof, waterproof, and resistant to grease. 3. PU material car cover: This type of car cover has excellent wear resistance, cold resistance, breathability, and aging resistance. However, due to its high cost, domestic manufacturers often opt for PEVA material as a substitute.
2
3
Share

Audi e-tron Charging Precautions?

Find a larger professional charging station. Here are the details: 1. Range: The official range of the Audi e-tron is 470 kilometers, but the actual range in use is about 400 kilometers. This can vary depending on external conditions, driving habits, highway driving, and air conditioning usage. Using the air conditioning or aggressive driving, such as rapid acceleration similar to gasoline cars, will consume more power. 2. Charging Port: Pay special attention to the location of the charging port. The positions for DC and AC charging are different, and the charging cables are often not long enough, especially when the car is parked with the front facing outward. There is a red emergency pull ring under the hood; if the charging gun cannot be removed, pull this ring to release it.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.