Does the V3 Lingyue have a hatchback model?

2 Answers
MatteoLynn
07/29/25 5:45am
V3 Lingyue does not have a hatchback version. Hatchback refers to the body style, which is generally divided into hatchback and sedan versions. The V3 Lingyue is a sedan under the Southeast Motors brand, with body dimensions of 4405mm in length, 1700mm in width, and 1415mm in height, and a wheelbase of 2500mm. In terms of appearance, the V3 Lingyue features a stylish and dynamic overall design with smooth, natural lines, while the dual exhaust pipes at the rear add a sporty touch. Under the hood, the V3 Lingyue is equipped with a Mitsubishi 4A91 all-aluminum engine with a displacement of 1.5L. The car also adopts a Mitsubishi EVO racing-tuned chassis and a five-link independent rear suspension.
Was this review help?
2
4
Share
DiDelilah
08/12/25 9:17am
I've driven the V3 Lingyue for several years and have never seen it in a hatchback version; it's always been a sedan. The design focuses on a stable style, with a spacious trunk but lacks the flexibility of a hatchback. Young people might prefer hatchbacks like the BYD F3, which are fuel-efficient and easy to drive in and out of the city. The Lingyue is more geared towards family users, with a suspension system that leans towards comfort rather than sportiness. Overall, this car offers good value for money, but if you want a hatchback, you'll have to switch to other brands like the Geely Emgrand or wait to see if Southeast Motors releases any new models with changes.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What Causes Water Leakage Under the Chassis When the Air Conditioning is On in a Sedan?

The reasons for water leakage under the chassis when the air conditioning is on in a sedan are as follows: 1. Drainage from the drainage holes to prevent water accumulation in the body: The drainage holes are usually located on both sides of the front windshield wipers. During rainy days, water accumulated in the sunroof flows through the A-pillar ducts to this area, merges with water in the engine compartment inside the fenders, and is discharged near the wheel mudguards. The sunroof drainage holes are generally located at the four corners of the sunroof on the roof. After rainwater enters these holes, it flows through the ducts inside the A-pillar/C-pillar and is eventually discharged from the drainage outlets near the front and rear mudguards under the car. 2. Air conditioning system drainage: The dripping position of the car's air conditioning system is located slightly to the right of the middle of the front of the car. 3. Water dripping from the muffler and exhaust pipe at the rear of the car: It is also normal for water to drip from the muffler and exhaust pipe at the rear of the car, and this phenomenon commonly occurs in winter. Gasoline is injected into the cylinders and mixed with air. After complete combustion in the combustion chamber, it mainly produces carbon dioxide and water. At high temperatures, water is discharged into the atmosphere in the form of gaseous water vapor.
1
1
Share

Which button is the car air conditioning button?

The car air conditioning button is the AC button. Car air conditioning refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. Types of car air conditioning: 1. According to the driving method, it is divided into independent type: a dedicated engine drives the compressor; non-independent type air conditioning compressor is driven by the car engine. 2. According to air conditioning performance, it is divided into: single-function type, where the refrigeration, heating, and ventilation systems are installed separately and operated independently without interfering with each other; integrated heating and cooling type shares the blower and air duct for refrigeration, heating, and ventilation, and is controlled on the same control panel. 3. According to the control method, it is divided into: fully automatic adjustment, which uses calculation and comparison circuits to control the adjustment mechanism through sensor signals and preset signals, automatically adjusting temperature and air volume; microcomputer-controlled fully automatic adjustment uses the microcomputer as the control center to achieve comprehensive and multi-functional optimal control and adjustment of the in-car air environment.
8
2
Share

Which Side is the Brake and Which Side is the Accelerator?

In a vehicle, the clutch is on the left, the brake is in the middle, and the accelerator is on the right. The arrangement of the clutch, brake, and accelerator in manual transmission vehicles aligns with the driving habits of the vast majority of people. In other words, from the perspective of operational habits, flexibility, and driver comfort, this arrangement is generally optimal. When pressing the brake or accelerator, the body needs support to maintain balance. When the right foot presses the pedal, the left foot can stabilize the body on the floor. If both feet were placed on the brake and accelerator separately, both feet would be in a semi-suspended state without a stable point of support, which could easily lead to instability when pressing the accelerator or brake.
3
4
Share

What is the symbol for blowing air on the windshield inside the car?

The symbols for blowing air on the windshield inside the car are: 1. A fan-shaped symbol indicates defrosting for the front windshield; 2. A rectangular symbol indicates defrosting for the rear windshield. How to deal with fogged windshields: 1. Cold air defogging: Locate the front window defogging switch, set the fan speed to high, turn on the AC switch, and adjust the temperature to low; 2. Warm air defogging: Turn on the heater, set the fan speed to high, and the fog will disappear in a few minutes; 3. Anti-fog spray: Simply spray it evenly on the glass surface and wipe it clean with a dry towel. The principle of anti-fog spray is to use surfactants to form a protective film on the glass surface, altering the surface tension of water molecules, causing fog droplets to coalesce into larger droplets, thus not obstructing visibility.
7
1
Share

What is the qualified light transmittance for car window film?

Car window film with a light transmittance of 70% or higher is considered qualified. The standard requires that the lower the light transmittance of the original car glass, the higher the light transmittance of the selected sun film should be. Car window film is a thin film applied to the front and rear windshields, side windows, and sunroof of a vehicle. Benefits of car window film: 1. Blocks a significant amount of heat generated by infrared rays; 2. Filters out ultraviolet rays, reducing the aging of car interiors; 3. Prevents injuries to passengers caused by accidental glass breakage; 4. Maintains privacy and safety; 5. Reduces air conditioning load and saves fuel; 6. Minimizes accidents caused by glare.
13
0
Share

How to Adjust Door Gaps?

Door gap adjustment can be solved by adjusting the hinges. Reasons for enlarged door gaps: 1. Aging of rubber seals over time, losing their sealing and cushioning functions; 2. Resulting in loud closing sounds, door rattling on uneven roads, and dust entering through gaps on gravel roads—simply replace the door sealing rubber strips; 3. Inadequate repair after an accident, leaving the door frame in a deformed state. A car door consists of an outer panel, inner panel, window frame, glass guide channel, hinges, locks, and window accessories. The inner panel houses components like window regulators and door locks, with reinforced sections for secure assembly. For enhanced safety, anti-collision beams are usually installed inside the outer panel. The inner and outer panels are joined via flanging, adhesive bonding, or spot welding, with the outer panel designed to be lightweight and the inner panel rigid to withstand greater impact forces.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.