Does the Toyota Yaris have a reverse camera?

1 Answers
MaggieAnn
07/29/25 8:43pm
Toyota Yaris does not come with a reverse camera. To install a reverse camera on the Toyota Yaris, you can opt for directly replacing the infotainment screen, which allows for the simultaneous use of navigation and reverse camera functions. Installing a reverse camera system provides a more intuitive and clear view of the rear situation when reversing, making it one of the most practical configurations for parking safety. The dimensions of the Toyota Yaris are 4115mm in length, 1700mm in width, and 1485mm in height, with a wheelbase of 2550mm. The Xuan Dong version of this model features fabric seats, offering strong sportiness and excellent body support. The Toyota Yaris is equipped with either a 1.5L or 1.3L engine, model numbers 7NR and 6NR respectively. These two engines differ in displacement and power but are both known for their stability.
Was this review help?
1
0
Share
More Forum Discussions

What is the best oil for Porsche?

Porsche recommends using 0W40 oil. Below are the relevant details about the best oil for Porsche: 1. 0W40 oil: Due to the high efficiency of the engine, the internal temperature of the engine becomes very high during operation. Using oil with a higher viscosity can better protect the engine and lower its internal temperature. 2. The quality of oil depends on: base oil and additives. The quality of the base oil depends on: the source of crude oil and refining technology, as well as synthetic process technology. The most authoritative method to distinguish genuine oil from fake oil is to have it tested by an experienced mechanic. 3. Additional information: The choice of oil should be based on the requirements of the engine. It is unnecessary to use overly advanced oil in engines with lower requirements, and it is also inappropriate to use lower-grade oil in engines with higher requirements.
1
5
Share

How high is the CT6 chassis?

CT6's chassis height is approximately 150mm, with the front wheel stabilizer bar's lowest point at about 110mm. Here is some relevant information about the car chassis: 1. The car chassis consists of four parts: the transmission system, the running system, the steering system, and the braking system. 2. The function of the car chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, receiving the power from the engine to make the car move and ensuring normal driving. 3. CT6 refers to the Cadillac CT6, which is a high-end luxury sedan designed to inherit the market space of the Seville SLS. 4. In terms of body size, the Cadillac CT6 has a length, width, and height of 5184mm, 1879mm, and 1472mm respectively, with a wheelbase of 3109mm.
9
1
Share

Should the Dodge Journey use 92 or 95 octane fuel?

The minimum fuel octane rating required for the Dodge Journey varies depending on the model. The 2.4L model has a minimum requirement of 92 octane, while the 3.6L model requires at least 95 octane. The diesel version uses No. 0 diesel fuel. Here is some related information about 92 and 95 octane gasoline: 1. The most commonly used gasoline grades for gasoline engines are 92 and 95 octane. In fact, there is no difference in fuel quality between these two grades. 2. 92 octane gasoline consists of 92% isooctane and 8% n-heptane, while 95 octane gasoline is composed of 95% isooctane and 5% n-heptane. The different proportions of isooctane and n-heptane in these two fuel grades result in varying anti-knock properties, with higher isooctane content providing stronger anti-knock performance.
16
1
Share

What are the reasons for the failure of BMW's parking distance warning device?

Here are the specific reasons for the failure of BMW's parking distance warning device: 1. Reason 1: A circuit failure or damage to a radar power supply may be the cause. The failure of the parking distance warning device essentially means the front or rear parking radar is not functioning, preventing the detection of distances to obstacles. If the vehicle is equipped with front and rear parking radars, the radar sensors can be seen on both the front and rear bumpers. 2. Reason 2: Check if there is an issue with the module signal. It might be a module problem, and it is recommended to perform a computer diagnosis for further confirmation. The PDC module is integrated into the JBE front electronic module. Here are the specific reasons for the failure of BMW's parking distance warning device: 1. Reason 1: A circuit failure or damage to a radar power supply may be the cause. 2. Reason 2: Check if there is an issue with the module signal.
17
0
Share

What causes the loud noise from the BMW 5 Series electric fan?

The reasons for the loud noise from the BMW 5 Series electric fan are as follows: 1. Carbon deposits: As old engine oil becomes thinner with use, carbon deposits accumulate more and more. Thinner engine oil can easily lead to oil leakage, resulting in increasing carbon deposits and significant power loss. When new oil is added, the engine may not adapt to the viscosity of the new oil, potentially causing higher RPMs, which in turn leads to louder engine noise. 2. Coolant: When the coolant temperature is too low, problems are likely to occur, and the engine noise may increase. In such cases, it is advisable to check and replace the coolant to avoid other issues. 3. Shock absorbers: Generally, when driving over speed bumps, you can feel whether the vehicle's shock absorbers are functioning properly. If there is an issue with the shock absorbers, it can result in louder engine noise.
17
2
Share

What is the normal range for vehicle deviation?

When a vehicle maintains steady driving over 1000 meters, a deviation within 5 meters is considered normal. Causes of vehicle deviation include: 1. Incorrect wheel alignment: In most cases, deviation can be resolved by performing a wheel alignment. However, if the issue persists after alignment, other factors must be considered. 2. Unequal tire pressure on both sides: Different tire pressures cause tires to vary in size, inevitably leading to deviation. 3. Front shock absorber failure: A failed front shock absorber results in uneven suspension heights during driving, causing uneven force distribution and deviation. Specialized shock absorber testers can be used to assess their condition; if disassembly is not possible, a stretching method can be employed to evaluate. 4. Chassis wear: Excessive wear or abnormal gaps in the vehicle's chassis components can easily cause deviation. Key areas prone to excessive gaps include steering linkage ball joints, support arm bushings, and stabilizer bar bushings. These parts should be thoroughly inspected for wear.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.