Does the Toyota Vios have airbags?

How often should the spark plugs be replaced in the new Jetta?

The new Jetta's spark plugs are recommended to be replaced every 35,000 kilometers or 48 months. Under normal maintenance conditions, car spark plugs should be replaced after traveling 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is advisable to follow the user manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage distributor wires in the firing order and secure the cover plate.

16

4

Share

What are the body dimensions of the Octavia?

The length, width, and height dimensions of the Octavia are 4675mm/1814mm/1460mm, which are official data. The length of the Octavia refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the outermost protruding parts at the front and rear of the car; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's support plane. The naturally aspirated engine of the Octavia has a maximum power of 83kw and a maximum torque of 145 Nm. The maximum power speed of this engine is 6000 rpm, and the maximum torque speed is 3900 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is matched with a manual transmission (MT). The state has relevant regulations regarding the dimensions of vehicles. According to the national standard 'GB1589-89', the total width of a vehicle does not include the rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. In other words, in the national standard, the significance of vehicle width data lies in providing enough space during overtaking to prevent accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the state stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of relevant public roads.

9

2

Share

What is the normal tire pressure for the Envision?

The normal tire pressure range for the Buick Envision is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data complies with the international GBT2978-2008 standard requirements. The Buick Envision is equipped with an active tire pressure monitoring system, allowing drivers to view specific tire pressure values directly on the dashboard. The tire pressure monitoring system automatically monitors tire pressure in real-time during driving and alerts the driver to tire leaks or low pressure to ensure driving safety. If the tire pressure monitoring indicator light illuminates (a yellow symbol featuring an irregular circle without a seal at the top, four small spikes at the bottom, and an exclamation mark inside), it generally indicates one of the following three reasons: Abnormal tire pressure. The system typically triggers an alert when the pressure is below 1.8bar or above 3.0bar. In such cases, tire inspection and pressure adjustment are necessary. The tire pressure monitoring system has not been reset. After inflating the tires, if the tire pressure reset is not performed promptly, the system continues to record the previous data, causing the tire pressure monitoring light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, installed inside the tire and connected to the tire inflation valve, monitors tire pressure. If the sensor is damaged during driving, such as by hitting an obstacle, it can cause the tire pressure warning light to turn on. In case of sensor damage, the only solution is to replace it with a new component.

2

4

Share

How Long After the First Maintenance Should the Second Maintenance Be Performed?

After the first maintenance of a car, the second maintenance should be performed after driving another 5,000 kilometers. Below are the relevant details: 1. After the second maintenance, maintenance is required every 5,000 kilometers. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 3. The preventive work involves regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car. The purpose is to keep the car clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life. The content and requirements of car maintenance are clearly specified in the car's user manual and are mandatory to a certain extent.

8

1

Share

How Many Cylinders Does the Porsche 911 Engine Have?

Porsche 911 is equipped with a twin-turbocharged horizontally opposed six-cylinder engine. The Porsche 911 is a sports car produced by Porsche AG in Stuttgart, Germany, designed by Ferdinand Alexander Porsche. Here are some additional details: 1. The horizontally opposed six-cylinder engine is a reciprocating engine consisting of 6 pistons divided into 3 cylinders on each side, arranged horizontally opposite each other. This entry specifically refers to piston internal combustion engines. 2. The Porsche 911 features a stylish and dynamic exterior, with smooth lines that are considered classic in the sports car world. The interior is meticulously crafted with ergonomic designs that ensure comfort.

6

0

Share

Where is the cabin air filter located in a Ford Mondeo?

Mondeo's cabin air filter is located on the right side of the driver's accelerator pedal, which requires removing the accelerator pedal to access it. The cabin air filter functions to purify incoming outside air before it enters the vehicle interior. The replacement procedure is as follows: 1. First remove the air vent above the glove compartment on the passenger side, which is secured by three plastic clips - apply moderate force during removal to avoid damage. 2. There's a decorative panel on the right side of the glove compartment, remove it using the same method. 3. Use a screwdriver to remove six screws on the glove compartment. 4. After removing all screws, disconnect the glove compartment lighting wire and pull the glove compartment outward. 5. The cabin air filter becomes visible after removing the glove compartment. After replacement, reassemble the glove compartment by reversing the removal sequence.

9

0

Share

Does the Toyota Vios have airbags?

How often should the spark plugs be replaced in the new Jetta?

What are the body dimensions of the Octavia?

What is the normal tire pressure for the Envision?

How Long After the First Maintenance Should the Second Maintenance Be Performed?

How Many Cylinders Does the Porsche 911 Engine Have?

Where is the cabin air filter located in a Ford Mondeo?

Tips for Choosing License Plates for Used Cars?

What engine does the Lexus IS use?

What is the minimum speed limit on highways?

What are the reasons why a car cannot start?