···
Log in / Register

Does the Toyota Prado have a China 6 version?

4 Answers
SanEmery
07/29/25 3:20pm

Toyota Prado does not have a China 6 version, and the currently available models of Toyota Prado are all China 5 versions. The body dimensions of the Toyota Prado are 4840mm in length, 1855mm in width, and 1890mm in height, with a wheelbase of 2790mm. In terms of power, the Prado is equipped with a 7GR-FKS 3.5L naturally aspirated V6 engine, delivering a maximum power of 20 kilowatts and a peak torque of 365 Newton-meters. The Toyota Prado features dual injection technology and an automatic start-stop function, with the transmission system paired with a 6-speed automatic manual transmission and a new part-time four-wheel drive system. In terms of configuration, the Toyota Prado offers a 7-seat layout, tire pressure monitoring, parking radar, cruise control, a 4.2-inch dashboard LCD display, a car refrigerator, three-zone automatic air conditioning, and an 8-inch multimedia display screen.

Was this review help?
6
1
Share
JeffreyAnn
08/14/25 8:06am

The Toyota Prado indeed has models that meet the China 6 emission standards, which is the latest regulation introduced by China's Ministry of Environmental Protection. During my time working in the automotive industry, I frequently encountered such issues. The China 6 standard imposes very strict controls on pollutant emissions from vehicle exhaust. To adapt to the Chinese market, Toyota launched a China 6b-compatible Prado version as early as 2021. For example, the 2023 Prado model incorporates advanced engine technologies, such as direct fuel injection systems, which significantly reduce CO2 and NOx emissions while also improving fuel efficiency, addressing the higher fuel consumption issues seen in older China 5 models. If you're considering purchasing this SUV, I recommend visiting a 4S dealership to check the environmental label of the specific model and confirm it meets China 6 standards before buying. After all, new vehicles are now required to comply with this standard, making them more environmentally friendly and reassuring to drive. This is particularly important for urban use, especially when dealing with traffic restriction policies, ensuring you won't face any issues. In short, this is the current mainstream configuration, so there's no need to worry about it being outdated.

Was this review help?
11
0
Share
Expand All
LeJuliet
10/11/25 7:50am

I've been using my Toyota Prado for long-distance trips for several years. To be honest, new cars now require China 6 emission standards. I remember my 2022 Prado is the China 6b version. Official data shows pollutant emissions have been reduced by over 20%. In daily driving, the engine does sound smoother, and fuel consumption is slightly lower than older models, saving quite a bit on gas money. It's a small contribution to environmental protection. The salesperson emphasized this point when I bought the car. If you're considering changing cars or buying your first car, China 6 is a must-choice, otherwise, you'll face registration hassles, especially in big cities with strict traffic restrictions. Toyota has done quite well in this aspect. Although the model is large, it meets emission standards, so you don't have to worry about fines during long-distance off-road trips. I recommend choosing the high-end version, such as the one with a particulate filter, to further optimize performance. In short, it's a practical and compliant choice.

Was this review help?
15
2
Share
Expand All
McJocelyn
11/25/25 2:09am

The new models of Toyota Prado all meet the China 6 emission standards, which means they comply with the strictest environmental requirements currently. I recently helped a friend look at cars and considered the 2023 Prado. The dealership clearly labeled it as China 6b compliant, with a newly designed engine that reduces pollution. The fuel consumption is slightly lower during daily use, which feels great. Before purchasing, just check the manufacturer's data to confirm the emission information—don't overlook this point to avoid any issues when driving in the city.

Was this review help?
11
5
Share
Expand All
More Forum Discussions

Where is the fuel tank cap button on the Audi A6?

Audi A6 fuel tank cap button is located at the lower part of the driver's door, on the left side of the legroom, next to the front engine compartment switch. Taking the 2004 Audi A6 as an example, its body dimensions are: length 4886mm, width 1810mm, height 1475mm, wheelbase 2850mm, minimum ground clearance 115mm, fuel tank capacity 70L, and the body structure is a 4-door 5-seater sedan. The 2004 Audi A6 is equipped with a 2.8L naturally aspirated engine, with a maximum power of 142kW and a maximum torque of 280Nm, paired with a CVT continuously variable transmission.
15
0
Share

Where is the car fuel pump installed?

Car fuel pumps are installed inside the fuel tank. The function of the fuel pump is to draw gasoline from the fuel tank and deliver it through pipelines and fuel filters to the float chamber of the carburetor. It is precisely because of the fuel pump that the fuel tank can be installed at the rear of the car, far from the engine and below the engine level. Fuel pumps can be divided into two types based on their driving methods: mechanically driven diaphragm type and electrically driven type. The car fuel pump is one of the fundamental components of the fuel injection system in electronic fuel injection vehicles. It operates during engine startup and while the engine is running. If the engine stops but the ignition switch remains in the ON position, the HFMSFI control module will cut off the power supply to the fuel pump to prevent accidental ignition.
5
1
Share

What does the SVS on the car dashboard represent?

The SVS on the car dashboard indicates that the engine control unit has detected an error signal from a certain sensor or that it has exceeded the usage standard. The reasons for the light to come on are: 1. Fault in the fuel emission system; 2. Poor fuel quality; 3. Engine carbon buildup; 4. Spark plug carbon buildup; 5. Sensor fault; 6. Fault in the three-way catalytic converter; 7. Intake tract fault; 8. Engine knocking. The solutions for the SVS indicator light on the car dashboard are: 1. Replace the oxygen sensor; 2. Check if the oxygen sensor plug is loose; 3. Replace the three-way catalytic converter; 4. Clean the spark plugs; 5. Drain the old gasoline from the fuel tank and replace it with high-quality gasoline; 6. Clean the engine.
11
3
Share

What are the reasons for the high fuel consumption of the Qashqai?

The reasons for the high fuel consumption of the Qashqai are: 1. Excessive carbon deposits in the engine; 2. Damaged oxygen sensor; 3. Dirty oil filter, air filter, and fuel filter. The Qashqai is a compact car under Dongfeng Nissan, equipped with a 2.0L naturally aspirated engine. The engine has a maximum horsepower of 151 hp and a maximum torque of 194 Nm, paired with a CVT transmission. The dimensions of the Qashqai are 4401mm in length, 1837mm in width, and 1593mm in height, with a wheelbase of 2646mm. Its top speed is 186 km/h, and the trunk capacity is 486L.
1
3
Share

What is the displacement of the Changan CX20?

The Changan CX20 has two displacement options: 1.3L and 1.4L. The vehicle is equipped with two engines: a 1.3L naturally aspirated engine and a 1.4L naturally aspirated engine. The 1.3L engine delivers a maximum power of 63kW and a maximum torque of 110Nm, while the 1.4L engine produces a maximum power of 74kW and a maximum torque of 131Nm. The Changan CX20 is a compact car under the Changan brand, with dimensions of 3970mm in length, 1730mm in width, and 1615mm in height, and a wheelbase of 2450mm. It features a MacPherson independent front suspension and a trailing arm rear suspension, with a front-wheel-drive layout.
6
4
Share

What Maintenance Should Be Done for a New Car at 30,000 Kilometers?

The maintenance that should be done for a new car at 30,000 kilometers includes: 1. Changing the engine oil and the three filters; 2. Cleaning the throttle body and fuel system; 3. Replacing the coolant and brake fluid; 4. Checking the vehicle's safety condition. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car. Its purposes are: 1. To keep the car clean and tidy; 2. To maintain the vehicle's technical condition in normal state; 3. To eliminate hidden dangers and prevent faults; 4. To slow down the deterioration process of parts; 5. To extend the service life. Precautions for car maintenance include: 1. Avoid running the engine for a long time in an unventilated garage; 2. Avoid sucking the oil pipe with your mouth; 3. Avoid getting carburetor cleaner on the car body.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.